Blue Pirate
Well-Known Member
will consider screens
Kief tumbler wanted
- Thread starter Blue Pirate
- Start date
Star Dog
Well-Known Member
I don't own one of these I'm putting it out there as an option that doesn't cost hundreds of pounds, there was a round version available with stainless steel mesh iirc.
Alternatively check out bubble magic or hiesenberg.
If you don't want to lay out money you can 1x1mtr screens in suitable micron sizes from ebay.
Pardon our interruption...
www.ebay.co.uk
Alternatively check out bubble magic or hiesenberg.
If you don't want to lay out money you can 1x1mtr screens in suitable micron sizes from ebay.
Johiem
Well-Known Member
I bought one from France called the "pollinator" and it's performance was, erratic, difficult to control, but if you could get the damned thing out of "fresh hit Crack head" mode it would be pretty good. The motor relies on friction to slow it down. A stable speed motor and its golden. It was like a hundred bucks and I can tell it was 3d printed
Blue Pirate
Well-Known Member
It seems there’s no middle ground, either super expensive or low grade quality. I’m considering a DYI…
Johiem
Well-Known Member
I was thinking about a soil sifting table, refit with varied micron screens, but that can be loud and take up significant room.
medidedicated
Well-Known Member
Ionno if you seen me do this before. Using hands to agitate over a trim tray was fantastic enough for me over a tumbler. Its almost instant but have to find that fine line between getting as much as possible while not allowing impurities to eventually get through. Great for whatever but can take a step further and press it.
My highest return by dry weight is 37%. This stuff is crazy but its also easy to lose yield and/or get raunchyness from too much impurities. Though still great. I hit the bottom with a massage gun.
My highest return by dry weight is 37%. This stuff is crazy but its also easy to lose yield and/or get raunchyness from too much impurities. Though still great. I hit the bottom with a massage gun.
Attachments
conor c
Well-Known Member
You could always clean it up further with static electricity but you will lose a bit of yield but as you press lots of it for Roisin if I remember right it probably be a shout for your needs bud
medidedicated
Well-Known Member
Thats a good point its worth it because purity is what youre after with sift and bubble rosin. I just gave up on it for flower rosin I found was just fine and easier. I just dabbed some of that and holy cow I might try what you just said sometime to make sure its at least pure tasting. Yield is whatever, I dab it special occasion.
Blue Pirate
Well-Known Member
Theres various iterations to get ideas from & get things moving along….on this site.
www.diyncrafty.com
24 DIY Rock Tumbler Plans For Everyone
Learn how to turn ugly rock into gorgeous gems in just a few minutes with these superb DIY rock tumbler projects!
www.diyncrafty.com
formularacer
Well-Known Member
I picked up a set of sifting screens that fit a five gallon bucket.
Blue Pirate
Well-Known Member
Ty!
Blue Pirate
Well-Known Member
Looks nice…where did you purchase and what micron size? Ty
thumper60
Well-Known Member
Look into silk screen 90-120 mesh is perfect.
Star Dog
Well-Known Member
I used a 150 micron initially then a 90 and 125.
I seen 5 gallon bubble bags yesterday for £20 for a 5 set I can't see why they wouldn't work for sifting pulled over a bucket + you can make hash with them.
Blue Pirate
Well-Known Member
I have a 90 and 75 bag I’ve used with dry ice before…,
Davo68
Active Member
formularacer
Well-Known Member
They don't fit 5 gallon buckets. My two cents is they dried after they measured them and are just a little undersize. But they don't sit on bucket like claimed.
Company response was the production supervisor checked them. My response was you need a new production supervisor.