Thermoelectric wine cooler drying and curing - DIY

[Boymom1729]

I may be wrong, but your dehu looks quite similar to the one I used with a seperate board for power. If you go to post #500 to about post #512, I believe you will find your answer there.

I just took a look, thank you. Was just curious if those connectors they linked make it to where the power converter plugs right into it?

 

[Boymom1729]

Amazon.com

Amazon.com

so here is a simple power supply 5 amps should be enough to run both peltier and fans.
and some connectors to wire it all simply

I’m having the same issues as he did and was looking at these items. Seeing those connectors do you need to also splice the power converter wires to insert in the connector? Just curious how to join the two after splicing into the connector.

 

[Nugnewbie]

I just took a look, thank you. Was just curious if those connectors they linked make it to where the power converter plugs right into it?

Not exactly sure what you are asking but, if I remember correctly (sorry I have the memory of a fungus gnat), I just joined the red wires together, and the black wires together, and connected them to the power supply I purchased, which I plugged into the inkbird.

 

[Trust1337]

They should/

They should be fine putting them in a few days later. I would maybe wait if the buds in the cooler are almost finished, but a few days to a week will be fine, it will just extend the dry of the first ones in a bit.

I understand, so do I start again from scratch with the humidity Assuming the 2 earlier plants are already at 67% and I add the new ones. Do I then start again with all of them at 72%? Is that right?

 

[Hook Daddy]

I would start them at 70% and drop .5% the first week, then 1% from there until 62%. I’d let them sit there for at least a week, then depending on how you like them check and maybe drop to 58% for a few days before jarring/bagging if they need it.

 

[esco9ine]

So I have had my buds in the koolatron since the 15th of Oct which is 24 days today now at 62RH. I want to jar my buds but I'm unsure of what to do? Will I need boveda strips? @Hook Daddy I read what you said about bringing them to 58 RH for a couple of days before bagging/jarring them. Is that it? Nothing else to it for safe storage? Thanks in advance

 

[Hook Daddy]

So I have had my buds in the koolatron since the 15th of Oct which is 24 days today now at 62RH. I want to jar my buds but I'm unsure of what to do? Will I need boveda strips? @Hook Daddy I read what you said about bringing them to 58 RH for a couple of days before bagging/jarring them. Is that it? Nothing else to it for safe storage? Thanks in advance

Going to 58% rh is a good call imo. Let it settle there for a couple days then it should be good to jar. Hygrometers are not perfect, and 58% is a good stopping point. If you are worried you should put a small hygrometer in with the jar and check the rh.