4 inch Tube Aero with Chiller

Earl

Well-Known Member
Pure Water Club

This is where I got my 6 stage RO machine.

I get my replacement filters there also.

You can check ebay and google for prices.
Deals happen.
 

Earl

Well-Known Member
FACTORY DIRECT
CHILLERS


Original picture by original manufacturer.
We have been selling and manufacturing these chillers for 5 years.
We do not sell chillers for resale
and any chiller resold
will not be warranted.



Reef Tank / Fish Aquarium Chiller

Description and Specifications

Brand New Custom Built Chiller

½ HP 110V Quiet and Reliable

Retail Value $2000+

Custom built to quickly and efficiently chill marine coral reef tanks. Originally built for aquaculture this chiller will bring down the temperature in any tank fast and maintain the temperature easier than any other chiller of its size.

The design is different from that of typical mass produced ½ HP chillers that use a minimal amount of coils that are just barely enough to operate properly. This custom chiller has more than enough coils to make the heat exchange fast and efficient.

Why pay 3 or 4 times as much for a chiller when this one sells for less than a ¼ HP model that will run and run using more power and taking considerably longer to cool down your tank?

This heavy duty unit will probably outlast your tank!

1/2 hp chiller

110v and only draws 4.8 amps at full load

Flow thru tube in shell heat exchanger

1'' Threaded N.T.P. water supply in/out

Oversized heat exchanger for maximum heat transfer

Protective epoxy black coat on housing to protect from any salt spray

All copper also coated with epoxy.

Size 17x12x11

The second picture is plumbed to my 500 Gallon Reef Tank and it has been working for over 5 years now.

The Heat Exchanger is made of 6061T6 Marine Grade Aluminum with PVC shell
This chiller is specifically made for salt water reef tanks
No copper touches the Salt Water
Min Flow rate is 500 GPH the MAX is 2000 GPH
Up to 400 Gallon Fish Tank
_________________________________________________________________________________________________



ALSO AVAILABLE CONTROLLER FOR CHILLER $85.00

Ranco Digital ETC Series Controller

Model ETC-111000

The Ranco ETC is a microprocessor based temperature controller suitable for switching 120Volts at up to 16Amps for heating or cooling applications making it suitable for a wide range of applications. This is a great universal controller for any application where switching 120Volts or temperatures outside that of a normal home thermostat is required. The sensor with an 8' foot cable and instructions are included with the unit.

Specifications:

Temperature Set point Range: -30 to 220F
Differential range: 1 to 30F
Input Voltage: 120VAC, 208, 240VAC
Pilot duty: 125VA at 120/208/240VAC
Sensor: Thermistor, 2" long x 1/4"dia with 8' cable (included)
Control Ambient Temperatures
Operating: -20 to 140F
Storage: -40 to 176F
Ambient humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Agency Approvals: UL listed, file E94419, Guide XAPX, CSA certified, file LR68340, class 4813 02
Relay Output Ratings - NO (NC)

120V

208/240V
 

Earl

Well-Known Member
I'm fine with PMs,
unless you are begging for seeds,
which I don't have,
anyway no problem.
 

SOMEBEECH

Well-Known Member
I can get that pipe for 22.00 for 20 ft,i would like to make one with 4 rows do you have any advise?Are is there somewhere that you no of that maybe could explain it are a book?My thoughts are 2x600hps over the 4 rows of 5 ft runs.I might be in over my head now that i think about it,haha.
 

alsoranmike

Well-Known Member
thanks for taking the time to put up all this great info.

but can ya do something about the guy in the goofy glasses plastered all over this site in the banner ad?

tired of looking at him.

oh hell, maybe i'll just buy an ad.
 

Earl

Well-Known Member
thanks for taking the time to put up all this great info.

but can ya do something about the guy in the goofy glasses plastered all over this site in the banner ad?

tired of looking at him.

oh hell, maybe i'll just buy an ad.
Thats funny....
I don't even see any adds on my laptop.
Get an apple.
 

Earl

Well-Known Member
Hey earl wondering if youd stop by my grow man..Been having some issues and would like some input bro.
https://www.rollitup.org/hydroponics-aeroponics/144924-stealth-dwc-perpetual-sog.html
I think your doing pretty good.

Hope you get the RO

Here is my set up


This is where I got my RO machine
and replacement filters.

http://www.purewaterclub.com/

They have the small float valve also.


I have it plumbed into a big rubbermaid tub
with a float valve to keep it full and from running over.


I have two RO rez'.

The top one is for the space shuttle
and the other one is for the 4 inch.

There are small float valves that will hook right up to the RO line.




This is a 1/2 inch bulkhead fitting
under the RO rez.

It is hooked up so I can access RO

and it Teed to feed this float valve in the nutrient rez.



I built a frame around the tub to keep it from bulging out.
 

morrisgreenberg

Well-Known Member
I can get that pipe for 22.00 for 20 ft,i would like to make one with 4 rows do you have any advise?Are is there somewhere that you no of that maybe could explain it are a book?My thoughts are 2x600hps over the 4 rows of 5 ft runs.I might be in over my head now that i think about it,haha.[/qugo
to go FAQ on RIU homepage, and look for DIY its very similar to earl's i made one aswell like this , it easy as hell
 
Top