Realclosetgreenz
Well-Known Member
Would like to run 400w-1000w HID's Whith 90% less heat and be able put your plants whithin 6" of your lights. sound crazy. think again. Water-cooled bulb sytems are becoming more popular. and i found one that is god like.---------------------
-----------Product info--he Fresca Sol is a cutting edge top of the line water cooled fixture designed to take all the heat produced from your HPS bulb and transfer it through water to a designated cooling area.
Allowing you to have better control of your growing environment, this product is a great addition to any type of system or application where heat is a problem for one reason or another.
Finally! A water-cooled light you can depend on!
The Fresca Sol unit will eliminate 93% heat from your 250, 400, 600 or 1000 hps, and transfer it through water to a designated cooling area. This unit allows you to use your existing 1000 hps, 600 hps or 400 hps with real cool results. With low thermal emittance and less exhaust this results in a much higher CO2 concentrations.
The Design:
The Fresca Sol endplates are made from dependable aircraft aluminum, proving to withstand high temperatures. The tubes are made of durable Pyrex glass, giving our product a reliability you can count on!
The Features:
You can adjust your Fresca Sol fixture 5’’ inches from your plants rather than 18’’ to 24’’ inches! This increases the amount of light reaching your plants by nine times!
In addition you can also exchange your heat in the form of water into your designated reservoir, pool, Jacuzzi, or even an above ground kiddy pool. This gives you a heated pool year round! It is yet another way to lower electric bills and save you money, while increasing yields.
Specifications:
* 6” round 21” long and 25” long with socket
* Radiating heat is cut down by 93%
* Minimum 50-gallon reservoir per 1000-watt fixture
* Can be ran in a horizontal or vertical sequence (Not to exceed four in one line)
* Light can be put 6” from the top of your plants instead of 18” to 24” with an air-cooled system.
* This will result in 9 to 16 times more light actually hitting your plants.
* Dry weight is 9 pounds. It is 15 pounds when full of water.
* Works very well with a heat exchanger, chiller unit, or just a larger reservoir such as a pool or Jacuzzi.
* Low Thermal Emittance
* Spectrums increased by 5% to 10%
Required materials
55 gallon sealed container to keep from evaporation and dust and sediment from falling in.
633 Gallon Per Hour pump per 1000w HPS light
1/2 Black Poly Tubing
Hose Clamps
-----------Product info--he Fresca Sol is a cutting edge top of the line water cooled fixture designed to take all the heat produced from your HPS bulb and transfer it through water to a designated cooling area.
Allowing you to have better control of your growing environment, this product is a great addition to any type of system or application where heat is a problem for one reason or another.
Finally! A water-cooled light you can depend on!
The Fresca Sol unit will eliminate 93% heat from your 250, 400, 600 or 1000 hps, and transfer it through water to a designated cooling area. This unit allows you to use your existing 1000 hps, 600 hps or 400 hps with real cool results. With low thermal emittance and less exhaust this results in a much higher CO2 concentrations.
The Design:
The Fresca Sol endplates are made from dependable aircraft aluminum, proving to withstand high temperatures. The tubes are made of durable Pyrex glass, giving our product a reliability you can count on!
The Features:
You can adjust your Fresca Sol fixture 5’’ inches from your plants rather than 18’’ to 24’’ inches! This increases the amount of light reaching your plants by nine times!
In addition you can also exchange your heat in the form of water into your designated reservoir, pool, Jacuzzi, or even an above ground kiddy pool. This gives you a heated pool year round! It is yet another way to lower electric bills and save you money, while increasing yields.
Specifications:
* 6” round 21” long and 25” long with socket
* Radiating heat is cut down by 93%
* Minimum 50-gallon reservoir per 1000-watt fixture
* Can be ran in a horizontal or vertical sequence (Not to exceed four in one line)
* Light can be put 6” from the top of your plants instead of 18” to 24” with an air-cooled system.
* This will result in 9 to 16 times more light actually hitting your plants.
* Dry weight is 9 pounds. It is 15 pounds when full of water.
* Works very well with a heat exchanger, chiller unit, or just a larger reservoir such as a pool or Jacuzzi.
* Low Thermal Emittance
* Spectrums increased by 5% to 10%
Required materials
55 gallon sealed container to keep from evaporation and dust and sediment from falling in.
633 Gallon Per Hour pump per 1000w HPS light
1/2 Black Poly Tubing
Hose Clamps
Attachments
-
7.7 KB Views: 164