DIY Aero CFL 12/12 from seed

lurkmaster

Well-Known Member
12/12 from seed project in my two-tub aero design.

Using ~270W of CFLs putting out 17,500 lumens

No clue on what strains though.

I got the female from a buddy who had her under 1 26w cfl in a solo cup, I am expecting the one that has been in the aero since it was a tiny seedling to get a little bit bigger before starting to flower.

441087d1244382480-diy-aero-cfl-12-12-6_7_01.jpg

441088d1244382624-diy-aero-cfl-12-12-6_7_02.jpg


Here is what my aero setup looks like, its pretty simple.

10 Gallon tub inside an 18 Gallon tub, water gets sprayed into top tub via pump/mister then goes down into res through drainage holes.

Cost me about $60 all together, got everything but the net pots from local stores.. (target for tubs petsmart for water pump home depot for mister head and screw on tubing)

If you were to buy the pump online from HTG with say.... the net pots you could save like $20.

attachment.php


Timer is 15min on 30min off all day.
 

Attachments

  • 5_29_01.jpg
    5_29_01.jpg
    489.4 KB · Views: 248
  • 6_1_03.jpg
    6_1_03.jpg
    389.1 KB · Views: 282
  • 6_3_02.jpg
    6_3_02.jpg
    564.5 KB · Views: 187
  • 6_7_01.jpg
    6_7_01.jpg
    541.8 KB · Views: 1,328
  • 6_7_02.jpg
    6_7_02.jpg
    697.7 KB · Views: 3,110
  • setup_01.jpg
    setup_01.jpg
    491.7 KB · Views: 1,440
nice set-up! Good pix of the tubs. That first pic with all the hairs on it looks pretty amazing..

Good SHit

I'll be patiently watching...

+REP
 
This'll be cool. Wonder how big she'll get? And I think I said this already once before, but that aero tub is LEGIT!
 
nice setup lurk i need to build one of those! i got that 1 (sativa)plant inside in
soil thats been on 12/12 since seed and its done great its 52 days old with nice thick white buds!i may try another plant on 12/12 from seed.
 
nice setup lurk i need to build one of those! i got that 1 (sativa)plant inside in
soil thats been on 12/12 since seed and its done great its 52 days old with nice thick white buds!i may try another plant on 12/12 from seed.

12/12 from seed is the best way to grow big sativa plants, it keeps them manageable, some companies even say to top your plant at the beginning of flowering to keep it manageable indoors.
 
12/12 from seed is the best way to grow big sativa plants, it keeps them manageable, some companies even say to top your plant at the beginning of flowering to keep it manageable indoors.
i did not know that! iI just did mine as a experiment had no clue as of the strain or anything.what sativas have big white buds like that its all white with tiny light orenge coler and kind of smells like rootin fruit!what do u think?
 
Lookin great man. You posted on my thread saying I inspired you but I'm still not man enough to attempt aero - my plants would be burned to death in hours lol. Keep it up man. Hastle me on my thread when you post pics and ill stop by to check it out.
 
12/12 from seed is the best way to grow big sativa plants, it keeps them manageable, some companies even say to top your plant at the beginning of flowering to keep it manageable indoors.
Do they say how far into flowering to do this, even if only an approximate guesstimate? Mine are very sativa dominant, and I don't want to find that 5.5' (or 6.5' tops, but that's only if I do some real rigging and rearranging, meaning I'd need someone else to do it!) isn't enough after all and be forced to harvest too early! Just switched to 12/12 last night, so I'm quite at the beginning of flowering. Also, using the Stealth BP, so I've got plenty of room for roots and plants; it's only light reflector height allowance that needs to concern me. :)

Lurk, lovin' your setup! :clap: This looks almost identical to what I've been picturing in my brain for putting together a misting cloner as well as for growing plants (once I'm ready for the latter LOL), but never thought of the garden aerator thingie! It's hard to tell from photos though, and doesn't help that I'm not well-hearsed in hardware :lol: .... is the aerator from a garden hose nozzle or from a sprinkler head? (I'm guessing sprinkler head, but I could be wrong about both. LOL)

What kind of time frame till harvest can one expect with 12/12 from seed, and what kind of yield? (I know that's a ball park figure question at best, as it depends on strains and a myriad of environmental factors.)

And my last question: For those of us who can put something together if there are step-by-step instructions, would you be so kind as to post a brief "manual" of sorts RE: specific parts, assembly, and how far to place the plants above the mister, how much water to be kept in there.... etc., etc.? Nothing intricate or hours of work, just a basic step-by-step how-to. You'd have many appreciative people here! ;)
 
Do they say how far into flowering to do this, even if only an approximate guesstimate? Mine are very sativa dominant, and I don't want to find that 5.5' (or 6.5' tops, but that's only if I do some real rigging and rearranging, meaning I'd need someone else to do it!) isn't enough after all and be forced to harvest too early! Just switched to 12/12 last night, so I'm quite at the beginning of flowering. Also, using the Stealth BP, so I've got plenty of room for roots and plants; it's only light reflector height allowance that needs to concern me. :)

Lurk, lovin' your setup! :clap: This looks almost identical to what I've been picturing in my brain for putting together a misting cloner as well as for growing plants (once I'm ready for the latter LOL), but never thought of the garden aerator thingie! It's hard to tell from photos though, and doesn't help that I'm not well-hearsed in hardware :lol: .... is the aerator from a garden hose nozzle or from a sprinkler head? (I'm guessing sprinkler head, but I could be wrong about both. LOL)

What kind of time frame till harvest can one expect with 12/12 from seed, and what kind of yield? (I know that's a ball park figure question at best, as it depends on strains and a myriad of environmental factors.)

And my last question: For those of us who can put something together if there are step-by-step instructions, would you be so kind as to post a brief "manual" of sorts RE: specific parts, assembly, and how far to place the plants above the mister, how much water to be kept in there.... etc., etc.? Nothing intricate or hours of work, just a basic step-by-step how-to. You'd have many appreciative people here! ;)

Yea, it all depends on your setup and the strain.

If your plant is really getting too big you can always tie the top down, not a big issue.

Its more for manageability than anything, you want to top your plant plant BEFORE the big flowering stretch. If you are going to use a veg cycle its only to get a nice root structure and main stem for the colas to form. So it stretches the new growth (which will be the secondary nodes) instead of the main node exploding even more.

12/12 from seed is essentially making your plant an autoflowering strain with a shorter day period.

I might add, 12/12 from seed can increase your chance for females because of the reduced hours of light.

It will start flowering on its own whenever it is ready to, it wont start making buds a day sooner or later, it will make them as soon as it physically can.

Topping your plant right when you put it into 12/12 seems like it would be a better option, but that requires you to veg the plant big enough to top it in the first place, and that will take longer than just keeping 12/12 on from the start.

I was planning on a big guide next full grow when I get moved into my new place, once I get all of the kinks worked out (right now its pretty rock solid though)

I have gone through 4-5 different versions of this tub, I have tried lots of configurations but this one seems to work out the best, and only because of the specific water pump I am using.

The top of the water pump has a threaded male end.
I screwed a 10" riser with a sprinkler head onto the pump.
Then the sprinkler head pokes right through the hole in the top tub and sprays your plants.







Cool, will do.
 
And my last question: For those of us who can put something together if there are step-by-step instructions, would you be so kind as to post a brief "manual" of sorts RE: specific parts, assembly, and how far to place the plants above the mister, how much water to be kept in there.... etc., etc.? Nothing intricate or hours of work, just a basic step-by-step how-to. You'd have many appreciative people here! ;)

Hey Kat heres a diagram of an aero-tub setup off of lurk's last journal...

twotub.jpg


And also theres some good aero designs and discussion here. These are just the two that came to mind, but I'm sure there are tons on RIU and other sites.
 
Hey Kat heres a diagram of an aero-tub setup off of lurk's last journal...

twotub.jpg


And also theres some good aero designs and discussion here. These are just the two that came to mind, but I'm sure there are tons on RIU and other sites.

Thats one of the many revisions. I have discovered that it works best with one head in the middle, and its easier to work with that way. (see picture in first post)
 
Here is a little update on the honey in flowering...
attachment.php

attachment.php



Here is a bagseed that has been in my aero on 12/12 from seed...


DAY 21
attachment.php



The current plant that is flowering was started in soil and given to me at about 4 weeks old after it showed sex. (12/12 from seed with no nutrients) Its really weird seeing buds with 1 point leaves shooting out.
 

Attachments

  • 6_10_01.jpg
    6_10_01.jpg
    632 KB · Views: 525
  • 6_10_02.jpg
    6_10_02.jpg
    647.6 KB · Views: 531
  • 6_10_03.jpg
    6_10_03.jpg
    375.6 KB · Views: 518
Back
Top