Harvest a Pound Every Three Weeks!

L

LordVyper

Active Member
maddawg13 said:
Just make sure you check your pH on your res and just follow the instructions on the bottle of clonex. You can also add Botanicare Liquid Karma a 5ml/gallon and Gro Pro at 7.5ml/gallon. If you are using RO water make sure you add some Cal-Mag+ at 5ml/gallon to the res. Not trying to start anything but like I said this is what I was working on !
Click to expand...
Haha, no worries bro, we're all friends here!:peace:
 
andyman

andyman

Well-Known Member
man guys/gals it sure takes long enough to get caught up here if you dont log on for a week or 2.

also I have a blueberry clone that grows weird. the main stem is more flat than round and the new shoots grow on the same side and sometimes like 3 or 4 at one spot. some of the fan leaves grow funny too, like 2 fan leaves grown together out of the same spot.
anyone else had this happen?
 
StinkBud

StinkBud

Well-Known Member
nuskool89 said:
stinkbud i was under the impression that your veg unit was about the same as the flowering unit as it says in your High Times article. Where did this dual chamber veg unit pictured on page 1 come from. Which should I do, two 45 inch fence posts with room for 12 or the dual chamber ruffneck idea with room for 12? Also you say you grow Ak47, which genetics if i may ask, I want the uniformity I see in these pics man.

By the way you're my hero.
Click to expand...
They got the photo wrong in the magazine article. My veg unit is a dual container system that's designed like my cloner.
 
Y

yummy77552

Member
Dont think hes filling it up to the very top, rez is only 18 gallons... only asking to get an idea of how many mL per gallon he is using for us folks who are using a smaller rez, I plan on using 12 gallon not 18.:wall:
 
maddawg13

maddawg13

Active Member
yummy77552 said:
Dont think hes filling it up to the very top, rez is only 18 gallons... only asking to get an idea of how many mL per gallon he is using for us folks who are using a smaller rez, I plan on using 12 gallon not 18.:wall:
Click to expand...
The way I am doing it is as stinkbud said put the amount of ml in a gallon jug add water and then shake it real good and then pour it in until you get the ppm that you are wanting then ph it ( after you put nutes in ) . So many pages to read I cant remember which one it was . Hope maybe that will help ? :peace:
 
Y

yummy77552

Member
maddawg13 said:
The way I am doing it is as stinkbud said put the amount of ml in a gallon jug add water and then shake it real good and then pour it in until you get the ppm that you are wanting then ph it ( after you put nutes in ) . So many pages to read I cant remember which one it was . Hope maybe that will help ? :peace:
Click to expand...
Yea totally got that but I dont want to wast nutes, can you keep the mix in the gallon jug until you need more? thx 4 the reply
 
alsoranmike

alsoranmike

Well-Known Member
yummy77552 said:
Yea totally got that but I dont want to wast nutes, can you keep the mix in the gallon jug until you need more? thx 4 the reply
Click to expand...
Yeah you can... After all it's just rotten bird poop and shit (yes pun) like that. Some folks keep unused nutes in the fridge. I've never bothered. Maybe I should.
 
andyman

andyman

Well-Known Member
I had some in the fridge and some not and months later I couldnt tell the dif so I quit putting it in the fridge, just a cool dark closet.

and keeps friends from thinking I have dank dark ale.
 
SoCoMMJ

SoCoMMJ

Well-Known Member
So when you roll the little veg plants into the flower units sometimes the fan wants to flip them out of the 2" hole in the post. Duct tape was the first solution... this is more permanent: $7.50 / 100 + that much in freight.



http://www.cabinetparts.com/c/mirror-and-glass-clips/SPHU26000/


[Crappy phone pic, but you get the gist]



Use # 6 x 1/2" stainless steel screws..... and I installed the tabs upside down because they have a short tab on them. If you want to file down a mess of them you can install them right side up. same diff really.

Use a tiny drill to make a pilot hole using the tab as a guide... don't want the round part covering the 2" hole. Don't screw them down too tight or you can't spin it around.

Enjoy !
 

Attachments

D

DIRTHAWKER

Well-Known Member
Observation; I pulled my dehumidifier out of the flower room for a couple days to help dry my recent harvest. The flower room stays much cooler without it and the ac almost never kicks on, but the humidity level is up around 74-79. I didnt realize how much heat the dehumi puts off. I guess one could do away with the dehumi all together and hook the exhaust fan up to the humidty plug in the controller and set it to exhaust at around 60%. But then one would go through lots of c02.

Question; Is there a remedy to this situtation? I guess its kindof a double edged sword ehh?
 
R

reeftankin

Active Member
I built a cloner station and cut my clones and they wilted almost immediately. I have them on the timer, do i just need to wait? These are clones from bag seed i am just testing the unit out before cloning my others.
 
Aeroweed

Aeroweed

Well-Known Member
reeftankin said:
I built a cloner station and cut my clones and they wilted almost immediately. I have them on the timer, do i just need to wait? These are clones from bag seed i am just testing the unit out before cloning my others.
Click to expand...
What's the Ph & PPM of your water? RO or Tap?

How far away is your light? Type?
 
R

reeftankin

Active Member
Aeroweed said:
What's the Ph & PPM of your water? RO or Tap?

How far away is your light? Type?
Click to expand...
Rain water i capture to water all my plants. Light - sunlight. on my patio.

Update - turns out i just needed to wait. I cut the clones around 8:00 AM and put them in the cloning station, but noon they were all smiling and staring at the sun :) So far they are lookin good.
 
potpimp

potpimp

Sector 5 Moderator
andyman said:
man guys/gals it sure takes long enough to get caught up here if you dont log on for a week or 2.

also I have a blueberry clone that grows weird. the main stem is more flat than round and the new shoots grow on the same side and sometimes like 3 or 4 at one spot. some of the fan leaves grow funny too, like 2 fan leaves grown together out of the same spot.
anyone else had this happen?
Click to expand...
Hey Andyman! One of my blueberry's turned out like that too. It never got very big and the smoke wasn't worth the trouble.
 
D

deeweromekoms

Active Member
Mr Stinkbud, question: (long story, short version)

Babies are vegging out, about to power up (Flower) Growroom 9'x12'x8'.
Initially 2x1000w, expand to additional 2000w. Don't want to vent hot air into already hot attic - security and all.

For security and outside climate reasons - hot and humid (think SE. Florida) reasons, want to create fully sealed grow room. Non-vented reflectors, CO2, charcoal scrubber to keep indoor air fresh, and window AC unit to keep temp healthy 75-80 degrees.
Any reasons not to go this route? Do I need to have an outside air intake for any reason?

Anyone w experience w. flower room this size in this climate love to hear your thoughts.

Any suggestions alternative ideas different set ups comments welcome.

ps - is there a link on this thread available to download the entire thread as a pdf so i can check before asking additional repetitive questions?

Thanks all.
 
potpimp

potpimp

Sector 5 Moderator
whysohigh

whysohigh

Well-Known Member
SoCoMMJ said:
So when you roll the little veg plants into the flower units sometimes the fan wants to flip them out of the 2" hole in the post. Duct tape was the first solution... this is more permanent: $7.50 / 100 + that much in freight.



http://www.cabinetparts.com/c/mirror-and-glass-clips/SPHU26000/


[Crappy phone pic, but you get the gist]



Use # 6 x 1/2" stainless steel screws..... and I installed the tabs upside down because they have a short tab on them. If you want to file down a mess of them you can install them right side up. same diff really.

Use a tiny drill to make a pilot hole using the tab as a guide... don't want the round part covering the 2" hole. Don't screw them down too tight or you can't spin it around.

Enjoy !
Click to expand...
read back a few pages i posted the same thing:roll:
 
You must log in or register to reply here.
Top