My first blueberry plant!!! Need help!!

MediMary

Well-Known Member
nas put the light bulbs vertical and go X O X O X
where plant is X, and Light is O, so only flower 3, and save the other plant for later, make her a mother or something
best use of the light
you wont get a very large yield I am sorry to say though, not enough penetration.
 

nas2007

Well-Known Member
nas put the light bulbs vertical and go X O X O X
where plant is X, and Light is O, so only flower 3, and save the other plant for later, make her a mother or something
best use of the light
you wont get a very large yield I am sorry to say though, not enough penetration.
hey medi im very sorry i just relised, the quastion i asked was for full period i meant to say that the 2x250watts cfl light for vegging perioud only,then i got a 600watts light for the flower. so are the vegging lights okey for 4 plants then?
 
6 clones in rockwool plugs rooted in bout 12 days ( i got lazy and left them in there for another week, so 19 days sitting in a clone tray) . then I vegged under 600watts HPS. Pics are with 4 weeks to go. Lucas formula all the way ( with 220ppm water from tap ) as an experiment. Seems fine . i just need to get a 400watt MH for tha little closet. i hate veggin with an HPS bulb, too much stretch.
 

Attachments

rombomb420

Well-Known Member
First of all, turn off your CAPS - your post is really hard to read like that...

...then mosey on over to Widow Makers excellent thread and read through the whole thing: https://www.rollitup.org/newbie-central/937-how-grow-marijuana.html
...that will give you a good start. But specifically for Blueberry, a good tip is that this strain is notoriously picky with the amounts of nutrients you feed it - it doesn't take much to overfeed it, so be sure to start out at about 25% of the recommended nutrient measurements. Good Luck!
Pretty much exactly what I was going to say about blueberry, but it's not just the amount of nutrients, it's the ph & the nutrient lockout that can ensue.
 

rombomb420

Well-Known Member
What made you want to grow blueberry? There are a lot easier options. You should try new york city diesel. This has been one of the easier strains to grow for me so far in my experience.

Just make sure to try to keep your ph right in the 6.5 to 6.8 range & don't feed more than every two weeks. Anything lower than that ph wise & it will get sensitive. A friend of mine used to grow several strains at once & he had the hardest time of all of them with blueberry. It's good smoke but it isn't the easiest herb to cultivate. Good luck bro!
 

nas2007

Well-Known Member
That's more than enough to veg 4 blue's! GL! Keep us updated!!!

SLB
thanks sbl. now that this is out the way. i was stuck about the ph levels. i got a meter that will tell me how much its got and i now to keep it between 6.5 and 6.8 but how do i keep the ph levels under control?
 

nas2007

Well-Known Member
i was stuck about the ph levels. i got a meter that will tell me how much its got and i now to keep it between 6.5 and 6.8 but how do i keep the ph levels under control i mean can i adjust them and how?
 

mygirls

Medical Marijuana (MOD)
them bulbs will be fine.. all that has been said is right... your off to a great start with the info that is here. good luck and i'lll be watchingfor your grow..
 

mygirls

Medical Marijuana (MOD)
i was stuck about the ph levels. i got a meter that will tell me how much its got and i now to keep it between 6.5 and 6.8 but how do i keep the ph levels under control i mean can i adjust them and how?
i don't do homeade stuff, i buy the ph up and down. if you have a grow shop near you they willhave what your looking for...
 

nas2007

Well-Known Member
i don't do homeade stuff, i buy the ph up and down. if you have a grow shop near you they willhave what your looking for...
cool thank you mrgirls thats geart. all im doing now is waiting for all the stuff to arive shud be here all by tuesday and then ill get cracking with it!!! keeping all boys updated !!!!
becouse without you lot i wud have been f***ed!!! lol thanks again
 

SmokesLikeBob

Well-Known Member
cool thank you mrgirls thats geart. all im doing now is waiting for all the stuff to arive shud be here all by tuesday and then ill get cracking with it!!! keeping all boys updated !!!!
becouse without you lot i wud have been f***ed!!! lol thanks again
No problem nas, it's what we do best! haha

SLB
 

nas2007

Well-Known Member
i don't do homeade stuff, i buy the ph up and down. if you have a grow shop near you they willhave what your looking for...
thanks for that! i can get the ph up and down from the net. but i was wondering, do i mix the ph formula in the water i give to them? and will the resulst be instat on the meter when i top it up with ph up/down? and at what stage do i start checking the ph in the soil?
 

nas2007

Well-Known Member
i don't do homeade stuff, i buy the ph up and down. if you have a grow shop near you they willhave what your looking for...
thanks for that! i can get the ph up and down from the net. but i was wondering, do i mix the ph formula in the water i give to them? and will the resulst be instat on the meter when i top it up with ph up/down? and at what stage do i start checking the ph in the soil?
 

Integra21

Well-Known Member
First about your question on my profile. I had an entire crop die when I mixed GO Bio Root and GO Calmag+ into my Fox Farm trio. I believe there was a chemical reaction between the fertalizers and thats what caused it. And you are not supposed to use the General Organics lineup in hydro(especially DWC). I have read many journals with people getting good results with them in soil though but with the side note of the GO CalMag+ making the nutrient mix ph drop very low and you have to adjust it up every time. I'll answer all of the other questions in the quotes below.

some Questions!!

Q1) can any one tell me why do growers do cuttings from they marijuana plant and then re grow the cuttings?
A1)They use cuttings to make clones. Using cloens for flowering ensures a consistant end product that grow very similar in height and growth patters making it easier to place lights and get more even growth throughout your room. Another added bonus is knowing that all the plants will be female(provided they were cut from a female plant) and they should have identical nutrient requirements so you dont have to do custom mixes for pickier plants. There are several tutorials on cloning plants if you search around for them. It is very easy to do and well worth while if you have a verified female of good genetics.

Q2) and i heard that female plants ore better to grow is that true? and why?
A2)You only want to grow female plants. They are the only ones that produce buds(except hermies) and give you something to smoke. Males have almost no thc compared to females but can be used to make hash or cana butter if you were unfortunate enough to get only males from your seeds(not likely to happen). Male plants only produce pollen sacs which arent recomended for smoking. You also want to remove any males from your flower room if there are any because they will pollinate your whole crop. When females get pollinated, bud growth stops and seed formation begins. That is basically how you end up with schwag(lowest quality of herb).
Q3) are marijuana plants a low buzz if you grow them from seeds?
A3)No, not at all. Every plant out there came from a seed at some point. They dont get better with age, cloning is just used for the reasons stated above and you need some good seeds(Doesnt always mean expensive) to find a suitable mother. The buzz depends entirely on the genetics of the plant and how you grow it.
Q4) are cloned marijuana plants more stonger buzz?
They are the same as the mother that they came from, which is a seed. See answer above.
will this bulb do for the veg period?
That Bulb is perfect for veg. I use a 100w, 5700k cfl to veg 4-6 clones at a time. I also use a 100w metal halide light, and 2 42w 5700k cfl's to veg the same amounts of plants per light with similar results.
quastion
i bought 2 x Blue Spectrum 250 watt 8U 6400K E40 CFL Grow Light Bulb both have reflectors will these 2 lights do for a full perod of 4 blueberry
Im not sure I get the question...
thanks sbl. now that this is out the way. i was stuck about the ph levels. i got a meter that will tell me how much its got and i now to keep it between 6.5 and 6.8 but how do i keep the ph levels under control?
You simply adjust the ph of the nutrient mix for the plants and the water you use to the desired ph and just water them. It is also a good idea to check the ph of the soil and the run-oof from feeding and watering regularly.
thanks for that! i can get the ph up and down from the net. but i was wondering, do i mix the ph formula in the water i give to them? and will the resulst be instat on the meter when i top it up with ph up/down? and at what stage do i start checking the ph in the soil?
When you mix up nutrients, people generally do it in gallon incriments. So generically we'll say you fill a gallon jug with water, you look at your nutrients and the say add so much per gallon, use half or less of this amount to start with. Once the nutrients are mixed into the water check the ph. Depending on your meter it takes from about 2-60sec. to get a steady reading. Whatever the readout is, just adjust it accordingly with ph up or down and then feed the plants. Unless you use an air pump to airrate you nutrient mix, only mix what you need for a single flowering. Mixed nutrients "spoil" like food within a couple of days of mixing and arent reccomended for feeding your plants if the mix has sat for a few days. And you want to check your ph levels right from the beginning.

Hope all of this helps. There are many great resources out there to find all of this information and much more if you look around. If you are familiar with using torrent clients for downlods MediMary gave me this link to a torrent that has all of the information you could ever need in book and video form.
http://thepiratebay.org/torrent/4881798/Growing_Marijuana
 
Top