Easy Cloning strains?

[guitarabuser]

When I built my bubble cloner I found that almost any paint allowed some light through. I found the solution by using rubberized undercoating (available at auto parts stores). Zero light gets into the tub.

 

[delstele]

Yup light getting in will hinder root production, that's a good tip thanks!

 

[NickNasty]

yeah bubble cloners are super easy to make and maintain. Fastest rooting plant I have is a pineapple express, I see roots in 3-4 days on most of its cuttings.

 

[Cali chronic]

Hey just got my rapid rooters in the mail---from Sabastapool Cali---Ha I use to live up near there I know they know how to gro---and a country boy can survive.
Ok--- anyways they fit perfect in the bubbler I just cut them out of the propegation tray they came in as I am not going to grow 50 clones at a time as did not want to hydrate the unused ones till I am ready to clone again.
You will see, when I Shoot pics of some cloneiing for reference and personal logs tomorrow---they sit right down in the 1.750 holes I drilled in the top of that container. Stay suspended about a 1.250 from the top of the resevoir so I am going to run hydro bubbles instead of using the cookie sheet of fifty stations the Rapid Rooter came with. 5 at a time is plenty I might have to donate them to the collective I belong to as If all take that will put me over the top for amount? Hmmm

 

[Cali chronic]

Yes some strains clone better or easier then others---

 

[reefcouple]

NL - easiest I've come across.. but most are pretty simple...
Mazar
Ice
Kush
AK47 I had a few issues with, mine had weak genetics I believe

Some of the Indicas can be a little more finicky i've noticed, the Sativas seem to do the best imho.. But I actually have very close to 100% success rate on cloning.. Its all about finding the right procedure for yourself.. I like nodes that are about 4-6" long...

 

[delstele]

Diggen up an old thread that I think is useful.

I found Black Widow form Mr Nice clones well as dose his walkabout.

I have some blueberry unknown breeder it was gifted to me that's a bitch by the time it sprout roots the cutting has had it. Bummer its a good smoke.

I have some sage&sour that I'm cracking hoping that will clone out good.

 

[Fallen Buckshot]

anything thats not fem seed should clone fine

 

[ink the world]

I have a perpetual grow, I have to take cuttings regularly. So far the easiest strains to clone Ive grown is DNA Genetics Hashplant Haze. I have decent roots at 5 days all the time, never loose a cutting.

 

[friendlyfarmer]

anything thats not fem seed should clone fine

do you have a link or something that can shed some more light on this? i've never heard that but maybe i just never read close enough.

 

[doc111]

anything thats not fem seed should clone fine

I have never done feminized seeds but I've seen many perpetual grows on here with people using fem beans. I just ordered whiteberry and hope this isn't the case.

 

[The Ruiner]

I am finding that my Headband/Daywrecker/Underdawg (mass super skunk X 91 Chem) is extremely easy to clone. In fact, it absolutely HATES when I trim fan leaves when cloning and prefers it if I have at least 4, if not upwards of 6 nodes on the cutting. Also, it HATES it when I shave the stem. So basically my cloning is cut, soak (thrive-alive B-1), dip, tamp. Also, because the clone is of some size already I am expecting to only veg for about 10 days. I love working with this strain.

 

[smoke and coke]

anything thats not fem seed should clone fine

i have grown many fem strains from seeds and i clone them all very easily. with 1 exception is white rhino, usually only get 50% that take root and everything else is around 95-99% that take root.

 

[delstele]

I am finding that my Headband/Daywrecker/Underdawg (mass super skunk X 91 Chem) is extremely easy to clone. In fact, it absolutely HATES when I trim fan leaves when cloning and prefers it if I have at least 4, if not upwards of 6 nodes on the cutting. Also, it HATES it when I shave the stem. So basically my cloning is cut, soak (thrive-alive B-1), dip, tamp. Also, because the clone is of some size already I am expecting to only veg for about 10 days. I love working with this strain.

Sounds like a yummy strain, Where did you get it?

 

[doc111]

i have grown many fem strains from seeds and i clone them all very easily. with 1 exception is white rhino, usually only get 50% that take root and everything else is around 95-99% that take root.

That's good to know. I've always been reluctant to give feminized beans a go, but figured I needed to. Thanks.

 

[delstele]

I have never done feminized seeds but I've seen many perpetual grows on here with people using fem beans. I just ordered whiteberry and hope this isn't the case.

I have cloned BW Fem no problems.

 

[The Ruiner]

Sounds like a yummy strain, Where did you get it?

My former and now dead and gone dispensary.

 

[bshdctr]

My last several 'cloning sessions', I had 100% success rate using Subcool's exact cloning method found on his thread about cloning. Vortex and Chemdawg#4 have shown roots out the rapidrooters in 9days for me this way.

 

[drewabu]

Sannie shop chocolate rain / Nirvana crystal. I have a very high success rate w/these strains. Pic on the left is rain/ pic on right is my crystal. Both clones.


View attachment 1095908

* here is some slightly cured chocolate rain*

 

[delstele]

Cool glad to know that sannies CR is a clone friendly starin..