Doob's and Racer's Joint Venture!!

Doobieus

Doobieus

Well-Known Member
Went in this morning and what do I see? More white mold, FML seriously :cry:.

So I chopped all affected buds, which were all top colas and left the remainder to finish out. The denser buds all took a hit, I guess the only good thing right now is at least my room smells nice lol. So when my significant other wakes up, I get to clip these down into smaller nugs to inspect/sift through to hopefully find some more not molded buds and then off to dry.

Well at least the KB will be taken to full maturity. I like, well liked the density of the BW (Until the mold lol), but the KB looks so much more dank. So I guess if I were to lose a plant in this grow, the BW was the better candidate.

Still though.... **Hissy fit**

:wall::wall::wall::wall::wall::wall::wall::wall::wall::wall::wall::wall:
 
Doobieus

Doobieus

Well-Known Member
Dizzle Frost said:
that really sucks Doobs...wonder what it causing it
Click to expand...
I haven't the slightest idea, like I said the only thing I can think of is the fan circulating air is closer to the KB side. So maybe because the KB is such a beast the BW wasn't getting as much air as I thought. That mixed with really dense buds, is what I think might be the culprit. It sucks yeah but the buds seems pretty dank dude, at least some of the under nug will finish with proper time, given that shit doesn't mold too (Knock on wood).

Breeder says 7-7.5 weeks but we all know that shit's most likely a lie lol. I'm just glad some of the calyxes are swollen on some of these tops, at least it's not too badly pre harvested lol. Trying to stay in the positive here, trying.... lol.
 
Doobieus

Doobieus

Well-Known Member
Dizzle Frost said:
if all else fails..make iso with it......maybe that strain is more prone to mold than other
Click to expand...
Well Up's BW had some white mold issues also, so it's just a lot of variables in general. I make nice iso oil, looks like shatter BHO almost. I think my friend, my other half and I will enjoy it.
 
Doobieus

Doobieus

Well-Known Member
Hmmm might have to go BHO instead of Qwiso, seems butane kills it and iso extracts it from what I'm reading. Need to get a turkey baster.
 
Doobieus

Doobieus

Well-Known Member
Here's a mold update.... ugh.

I trimmed the major fan leaves off and started really inspecting the buds, yeah all of it is going to BHO. I really hope the under nugs that didn't look fucked up, stay not fucked up. This really fucking sucks, really really fucking sucks.
 
Mindmelted

Mindmelted

Well-Known Member
Doobieus said:
Here's a mold update.... ugh.

I trimmed the major fan leaves off and started really inspecting the buds, yeah all of it is going to BHO. I really hope the under nugs that didn't look fucked up, stay not fucked up. This really fucking sucks, really really fucking sucks.
Click to expand...
That sucks doobs sorry to hear that.You got some mold on your buds and i have another dead fucking bean sprout......:wall:
 
Doobieus

Doobieus

Well-Known Member
Grazzmon said:
Ummm.. turkey baster? ;) No Doob!!.. don't do it..kids are a pain in the arse..lol
Click to expand...
Lol yeah I was waiting for one of you smart asses to chime in on that one.

Mindmelted said:
That sucks doobs sorry to hear that.You got some mold on your buds and i have another dead fucking bean sprout......:wall:
Click to expand...
Lol and the one thing in common is? Lol fuck this state seriously ha ha. We're gonna have some good oils to smoke on though for sure lol.

Man that sucks Mind, don't feel bad dude I killed a couple when I started back up too lol. It's not as easy as getting back on a bike, I'll tell you that much. Can't do much but try, try, and try again. Buck up buddy, we'll get back on a roll here soon.
 
Mindmelted

Mindmelted

Well-Known Member
Doobieus said:
Lol yeah I was waiting for one of you smart asses to chime in on that one.


Lol and the one thing in common is? Lol fuck this state seriously ha ha. We're gonna have some good oils to smoke on though for sure lol.

Man that sucks Mind, don't feel bad dude I killed a couple when I started back up too lol. It's not as easy as getting back on a bike, I'll tell you that much. Can't do much but try, try, and try again. Buck up buddy, we'll get back on a roll here soon.
Click to expand...


Yeah i know.I also know what the issue is too..
No fucking smoke,i am not just right with out it.....:shock:
 
Dizzle Frost

Dizzle Frost

Well-Known Member
Doobieus said:
Hmmm might have to go BHO instead of Qwiso, seems butane kills it and iso extracts it from what I'm reading. Need to get a turkey baster.
Click to expand...
my bro uses a turkey baster.....for the same money you can prolly get a cheap honey bee extractor like i got , was like $18.....and i got a copper rig for smaller runs...i use that one alot. Your iso looked like red candy last time lol was pretty dank lookin :)

Id say its just that strain that has a prob...its like the sick kid with alergies in grade skewl LOL
 
T

TheLastWood

Well-Known Member
Idk about iso but I have made bho with moldy buds and it came out great so I can say from experience that it works with moldy buds.
 
Doobieus

Doobieus

Well-Known Member
Dizzle Frost said:
my bro uses a turkey baster.....for the same money you can prolly get a cheap honey bee extractor like i got , was like $18.....and i got a copper rig for smaller runs...i use that one alot. Your iso looked like red candy last time lol was pretty dank lookin :)

Id say its just that strain that has a prob...its like the sick kid with alergies in grade skewl LOL
Click to expand...
I'm gonna get the BB&B stainless steel turkey baster 3 piece set. It has an attachment needle thing that screws on that fits the tip of butane cans perfectly. With the hose clamp, and silk screen micron/coffee filter it'd still cost less than the honey bee extractor. Pretty sure the HB extractor is made with the same kind of plastic/material that they use for ABS. Probably will cost around 10 bucks for the stainless steel extractor/parts not including the butane. At 6.99 you can't beat the price on that turkey baster lol. Going to make some earwax and some shatter, best of both worlds lol.

I miss my Qwiso runs lol ahhhhh!! Pardon the dog hairs, I think the second one is the pic you saw.

DSCN1844.jpgFSCN1912.jpg

DSB65 said:
that sux about the mold...i killed my sour cream plant....
Click to expand...
Well 2012 is off to a fantastic start for you, Mind and I lol. That sucks DSB, keep your head up man.

TheLastWood said:
Idk about iso but I have made bho with moldy buds and it came out great so I can say from experience that it works with moldy buds.
Click to expand...
A couple of questions Last.

What kind of filter did you use silk screen or coffee filter? Also do you know what micron is the smallest I can go for BHO? I know the butane kills all toxicity of the mold/spores but I just want to have that extra caution you know?

Did you keep the buds pretty whole or did you grind them up? I'd imagine it'd be a better idea to do whole or small scissor cut buds considering the mold and all lol. When I've seen BHO done it was with lightly ground material, so I'm just wondering how you did it exactly.
 
T

TheLastWood

Well-Known Member
I have done it with small nugs or nugs broken into chunks only 1 time and it was with jack herer. I usually use trim or when I use buds I cut it with scissors, I leave it bigger than blunt rolling consistency. You will yield more with frosty trim or cut up buds than with whole buds or big chunks. They say using big chunks makes it more concentated tho, similar to doing a "quick wash" I guess, if that makes sense. I always cut it up tho. And I use 2 brown coffee filters. I was told to only use brown ones idk why lol. But I just use a rubber band and my glass tube 1" diameter and I've never had a blowout. I run 2 cans thru each tube.
 
You must log in or register to reply here.
Top