World Of Hempy
- Thread starter Moebius
- Start date
blacksun
New Member
Woah, don't throw out all products containing PGRs, just the bad PGRs, like paclobutrazol and alar.
Triacontanol is a perfectly safe PGR and is even found in natural organic amendments, like alfalfa.
Moebius
Well-Known Member
Which products can you find paclobutrazol in right now?
- Bushload by General Hydroponics
- Gravity by Emerald Triangle
- Flower Dragon by Grow Envy
- Phosphoload by Dutch Master
WattSaver
Well-Known Member
I've tried to find a definitive list, but haven't yet. I know that most Emerald Triangle (Humbolts own) are bad. In Colorado they have pulled Gravity and I believe they are no longer making it.
Many pages back I posted a link to a list of products that were pulled from the shelves in Oregon, some for growth regulators, most were because they didn't have proper testing or disclosure of ingredients.
WattSaver
Well-Known Member
I broke down my coco bucket the other day, I had to see if what jella said about his roots not hitting the bottom of the bucket using coco.
Well I have to say he is correct. The roots locked in the top inch of the perlite, and half of that was above the hole. I didn't see any sign of roots in the bottom inch of the perlite.
Well I have to say he is correct. The roots locked in the top inch of the perlite, and half of that was above the hole. I didn't see any sign of roots in the bottom inch of the perlite.
jela10
Well-Known Member
Watt, I swear i didn't see your post till after I took these pictures ten minutes ago and logged on...we are synched bro.....I was just cleaning out my mapito buckets and took pictures of the "plugs" and remembered what I posted about the perlite "root stop" I was experiencing with coco. Since the mapito was the same medium all the way down I had no division in root structure at the res level. As a matter of fact they look prolific there. But I do remember my last coco grow with C99 where I did have roots in the perlite res, but not as much as the upper layer of coco. Makes you wonder if you had coco all the way down to the bottom minus the perlite.
View attachment 2512930View attachment 2512931
View attachment 2512930View attachment 2512931
newworldicon
Well-Known Member
WattSaver
Well-Known Member
Here's another article, with a few more items.
http://www.manicbotanix.com/index.php?option=com_content&view=article&id=27&Itemid=14
sky rocket
Well-Known Member
Oh boy, I can't wait to get these GDP babies into their Hempys. I took really nice cuttings, they'll be ready in a week .. Then I can cut some more.
Moe what's your timer set for your GDP clones in your aerocloner? Are your cuttings between 6-8" cots? Btw what flowering week are you in in your current gdp's?
jela10
Well-Known Member
Hey Newwi, you were the one who told me not to use perlite in the bottom...and thanks for that advice...I remember clearly, although months ago. Looking at this root zone it's hard to believe I could prep it again. I'm sure some Cannazyme for a few treatments would do the trick. However, I have faith in Chaka here who has relayed his experience with successive medium reuses and the "induced" variability's he noted. As a matter of fact, I'm running a different medium next grow....Grodan rockwool grow-chunks only. I'm tearing apart the mapito now to see how much root penetration there was in the PU foam chunks. I'm thinking it doesn't need to be there. The natural air spaces that surround the irregular mate-ups of a cubed medium should be enough. Moebius and Dank also contest the source of the foam and it's possible contaminants based on the grade from which it was selected. I have to agree there too...my mapito came in an unmarked white bag with no labels or anything.
jela10
Well-Known Member
Moe should be swelling with pride! It's hard to call him a "Hempy Brother" anymore....his creation here on RIU is magical, and only draws those in search of that magic.Haha... Every time i check out the hydro section, hempy thread is on top
whocares100
Active Member
Dinafem Tin is perfect for germination, Yesterday I filled with water and 3 seeds, all fell to the bottom, Drained the water off and replaced with wet paper towel and back into the dark. This morning they were all splitting, Tomorrow I hope to get them in medium...
drdank50
Well-Known Member
Jela10, that is the most beautiful nug I've ever seen. The sheer depth, size, and density is ever present. It saddens me to know that I wont be able to pop this bean till next fall, but I am looking forward to being graced with its fruity aroma blessing me in the morning with coffee. Interesting that the effects linger into the next day. I have a rule where I cannot smoke sativas past 8:00 p.m. Evenings are for indicas!
Also, I have a wicked recipe for making brownies. Following the K.I.S.S rule for tasty brownies that have absolitely ZERO taste. Be careful, I use 5g for my batch and a decent size brownie will send you to the moon!
drdank50
Well-Known Member
Oh boy, I can't wait to get these GDP babies into their Hempys. I took really nice cuttings, they'll be ready in a week .. Then I can cut some more.
Moebius, that's quite a line up you have for a GDP army! I notice that you don't trim any of the leaves down on your clones. Makes me wonder why they keep telling you in all the videos how important it is to ensure the larger fans are trimmed so the leaves don't transpire faster. (For the inquiring minds that wanna know.. like myself... "Why trim cut fan leaves") Never the less, you've giving me an experiment to try. I would think it would be a result of your short-to-no veg time and the plants needing all their stored energy.
They look beautiful though! I have a feeling I'm going to be running some Ken's GDP next run with the PE. Is it me or does anyone else anticipate their next grow before their current is even started?
whocares100
Active Member
I worked on this today...I was looking for a way to draw in air from the bottom of a cabinet....I had about 3 inches of space to use, so I put together a fan and 2 shrouds, again recycled from Computer parts, the idea is to be able to aim the air instead of just putting in a fan...so one side points down and under the shelf, the other side where the air exhausts is another shroud pointed into the grow space...
I attached a 12 volt adapter and another shroud and fan setup on one power and plugged her in, worked perfect, both drew in under the shelf and remain unseen and unheard, the cord is long enough these coud be hung too, and I might use some of the 2 inches I have at the top for a similar intake.
I attached a 12 volt adapter and another shroud and fan setup on one power and plugged her in, worked perfect, both drew in under the shelf and remain unseen and unheard, the cord is long enough these coud be hung too, and I might use some of the 2 inches I have at the top for a similar intake.
whocares100
Active Member
And now for some Hempy Porn...I'm going to flower these they are 3 weeks old, wish me luck 
...if you notice the grid, I'm thinking scrog.
...if you notice the grid, I'm thinking scrog.
newworldicon
Well-Known Member
All I can tell you is I pull the main stem and most of the root ball out of the medium, break it up and re-pot a new plant ready for flowering immediately. This is done 9-16 times every 2 weeks and I have never had problems with it. I also use the coco version and have no experience with the PU version but it sounds nasty.
Similar threads
