Sativied
Well-Known Member
My plants stretched a little more than expected so I had to make some room to raise the lamp. I moved the exhaust into a diy softbox and attached it to the outside of my grow closet (which is why one side is left open).
All material I had lying around, not necessarily a recommendation. The exhaust is hanging on rubbers inside the box. The box itself also hangs on rubbers. This is to prevent vibration/buzzing sound to enter neighboring apartments. Again the insulated ducting, on both sides of the exhaust, makes a huge difference. The longer (especial 'after' the exhaust) the better.
(the dark foam is a left over from previous situation, covered with foil, but see previous posts in this thread for old situation)
All material I had lying around, not necessarily a recommendation. The exhaust is hanging on rubbers inside the box. The box itself also hangs on rubbers. This is to prevent vibration/buzzing sound to enter neighboring apartments. Again the insulated ducting, on both sides of the exhaust, makes a huge difference. The longer (especial 'after' the exhaust) the better.
(the dark foam is a left over from previous situation, covered with foil, but see previous posts in this thread for old situation)