lxrsd
Well-Known Member
Greeting my fellow growers. This is my first grow and i did some research but I'm still confused and think I'm doing something wrong. I'm growing 6 plants. Planted my seeds 5 days ago, The 12/8/13.
Growing
2 Acapulco Gold
2 G13 haze (1 Dead)
2 LSD
Using a seed started. Planted them and they started to come out 3 Days later. When they came out i added a 65W light source plus i added Balanced pH water at 6 third day and yesterday to keep the cubes moist( don't know if i should waited a couple of more days but the leaf were white/yellow when i added the light source they turned green so i'm guessing it was a positive thing). Thinking about making the transplant when the leaf grow more ( see pic). now the problem and question are, the G13 I've left bended and it looks broken don't know how to go about this. Should i just put a lil support system and let it keep growing like it is now or is it even going to keep growing? Both Acapulco gold looked fine but I'm a lil concerned since the small leafs are turning a lil brownish and i know that's not a good thing. How do i avoid that? add more light maybe since you don't feed the youngsters the first 2 weeks? and the leaf looks stuck to each other unlike the LSD which is coming along beautifully. When should i make the transplant to the 5 Gallon. should i had left the seeds in completely darkness for a whole week straight or i pulled out the gun too fast by adding the light source after 3 days just cause the leafs started to show. Plus one of my Acapulco have a Lil crack between leafs. do i need to worry about that? Got my seeds from a very reliable source and they been around for a long time.
My set up is 600w
465 C Exhaust fan (controller to control temp)
135 C Intake Fan
Superroots Air-Pot 5 Gallon
6" Cooltube XL Reflector w/ add-on 29" x 26"
Growing space 6'5, 5'0, 3'0
Indoor Air Quality Meter - Co2, Temperature & relative Humidity
Small Wall Fan for air Circulation
Portable humidifier to Control humidifier inside Grow Space
[h=1][/h]
Since its my first grow I'm testing to see what works best for me.
2 Pots fill with 80% Miracle Grow and 20% Perlite and HydroStone Expanded Clay Pellets at the bottom for draigane.
3 Pot fill with 60% Canna Coir 20% Organic Black Worm Casting, 20% Perlite since Coco doesnt hold much water and have to be watered daily and HydroStone Expanded Clay Pellets for drainage.
For Nutes i'm using Sensi coco Bloom Part A and B. Know not to feed the pots which contain MG since already comes with Nutes. Might feed after the 8 weeks but its not coco so i Dont know how my Plants will react .
Still working on the feeding schedule. i was thinking for coco, water one day and water+nute the next.
Growing
2 Acapulco Gold
2 G13 haze (1 Dead)
2 LSD
Using a seed started. Planted them and they started to come out 3 Days later. When they came out i added a 65W light source plus i added Balanced pH water at 6 third day and yesterday to keep the cubes moist( don't know if i should waited a couple of more days but the leaf were white/yellow when i added the light source they turned green so i'm guessing it was a positive thing). Thinking about making the transplant when the leaf grow more ( see pic). now the problem and question are, the G13 I've left bended and it looks broken don't know how to go about this. Should i just put a lil support system and let it keep growing like it is now or is it even going to keep growing? Both Acapulco gold looked fine but I'm a lil concerned since the small leafs are turning a lil brownish and i know that's not a good thing. How do i avoid that? add more light maybe since you don't feed the youngsters the first 2 weeks? and the leaf looks stuck to each other unlike the LSD which is coming along beautifully. When should i make the transplant to the 5 Gallon. should i had left the seeds in completely darkness for a whole week straight or i pulled out the gun too fast by adding the light source after 3 days just cause the leafs started to show. Plus one of my Acapulco have a Lil crack between leafs. do i need to worry about that? Got my seeds from a very reliable source and they been around for a long time.
My set up is 600w
465 C Exhaust fan (controller to control temp)
135 C Intake Fan
Superroots Air-Pot 5 Gallon
6" Cooltube XL Reflector w/ add-on 29" x 26"
Growing space 6'5, 5'0, 3'0
Indoor Air Quality Meter - Co2, Temperature & relative Humidity
Small Wall Fan for air Circulation
Portable humidifier to Control humidifier inside Grow Space
[h=1][/h]
Since its my first grow I'm testing to see what works best for me.
2 Pots fill with 80% Miracle Grow and 20% Perlite and HydroStone Expanded Clay Pellets at the bottom for draigane.
3 Pot fill with 60% Canna Coir 20% Organic Black Worm Casting, 20% Perlite since Coco doesnt hold much water and have to be watered daily and HydroStone Expanded Clay Pellets for drainage.
For Nutes i'm using Sensi coco Bloom Part A and B. Know not to feed the pots which contain MG since already comes with Nutes. Might feed after the 8 weeks but its not coco so i Dont know how my Plants will react .
Still working on the feeding schedule. i was thinking for coco, water one day and water+nute the next.
Attachments
-
52.5 KB Views: 155
-
52.7 KB Views: 206
-
60.7 KB Views: 136
-
68.8 KB Views: 171
-
50.5 KB Views: 142
-
37.4 KB Views: 117