Search results

The spiral light on Venus rising first and shining best

No. The only thing that speeds up finishing is very high levels of light and co2 combined. If your flowering times are too long, look into strains that finish faster.

Likely result in boytris. Some people call it bud mold. Deal with the humidity. Run a dehumidifier.

Your welcome and good luck!

If this is truly your first setup then there is no way you are going to get it right and dialed in your first try. The 1" gaps are not an issue. The design looks fine but remember you need to keep negative pressure to keep that filter working. The seams also need to be taped so you are just...

Why would you divide by 2? Wouldn't you want to clear the room 2x per minute vs. 1/2 per minute? Sounds like the fan would work but always oversize the filter and grab the phresh 550cfm 6" one.

As for what jiji wrote. How can he get rid of the partitions assuming flowering is on 12/12 and veg is on 24/0 or 18/6? And if the fluorescents don't fit then you probably need new lamps for that. Just remember before you order stuff to check the dimensions of the lamps. A 2ft 8 lamp sun...

I will speak to the oscillating fan question. There is no way you are going to want to mount an escalating fan in each of those rooms. They take up a lot of room. Keep the air circulating with small office desk style clip fans. You need to keep air moving and not necessarily oscillating it. As...

Ok got it. 4' 8 bulb fixture does probably produce a lot of heat. You've got it right from your post above. Hopefully there is still room to mount a filter next to the fan. I am sure this goes without saying but make sure to have an oscillating fan or a couple of small clip fans blowing air on...

Yes. Plants in veg use significantly less lighting levels. I would just bunch all the plants up around the lights.

You need to be measuring the temperature. You can buy a gauge anywhere for $10 preferably one with a maximum and minimum memory. Guessing the temperature is not accurate. You can always position a fan inside the room and blow hot air out. Inline fans work best but that is only if they are used...

The Helios will have a trigger for the lights and timer built in. The greenhouse controller will be a basic unit the will run the exhaust and co2. That unit will be on another circuit. Pretty sure that setup as described will work. Gotta talk with the electrician.

If you did the Y setup it seems to me like your fan would only draw air from the room closest to it. So I suppose that if the fan was in the flowering room drawing air from intakes into a filter into the cool tube and then into the veg room where the y is installed with a booster it could work.

Good afternoon. Room will be 12 x 5' x 7' tall. Running 3k hps air cooled hoods. 240v current will run the system. Currently the room is wired for 120. The first question is: would it be better to run 240 into its own terminal circuit breaker box and then into a four light terminal such...

Sounds like you are doing it best for your situation. It's really hard to run multiple rooms with only one inline fan. Right now you have a single stage exhaust system. This means you have air intake, then a carbon filter, then an inline fan, through the lighting hood and out. There is no real...

Buy a CAP Air-3 controller. It's an analog system controller that will turn off your exhaust fan when desired temperature is reached and turn on your co2 system whatever that may be. This is going to be your cheapest route to get the job done. The controller has a photosensor so co2 will only...

Is bio diesel good on scrog? Thinking about lowering the total plant count for less hassle. Anyone done the bio this way before? Recommendations or advice needed.

Is that the ambulance? Sahtiva?

Pheno number #1 bio diesel

No plans. So you need to be an employee of the dispensary. I.E. On payroll and grow within their authorized grow rooms?