Search results

That looks like an outlet that has a fuse for 250V 10A. I want a fuse/circuitbreaker on the DC Side of the driver that trips the A-C Side if there is any current flowing where it is not supposed to flow (heatsink,armature).

the lights can ground through the driver, but that is only grounding (current keeps flowing to the ground, not efficiënt and safe). The circuit breaker in my house will not trip because it only measures the difference between the fase and neutral of the A-C circuit for any leaks.

Now i have to invent my own little circuit breaker on the DC Side of the driver to prevent the power to flow to ground in case of failure. The circuit breaker that is installed in my home will not trip so if i don't use a circuit breaker on the DC Side to stop the A-C Side, the current flows to...

Okay i did some research. If a DC wire from the driver touches the armature the armature gets energised. If you ground your energised armature to the ground of the wall outlet the circuit breaker will not trip because the circuit breaker only measures the differential of the A-C circuit (at...

The iDEAL holders are rated for 250V max and the solid copper wire for 300-500V. 5 CXB at 1050mA will draw about 175V so the components will work fine and safe. What will happen if a DC wire gets lose and touches the heatsink? Is it enough to ground all the heatsinks to the ground of the wall...

The leds and the lenses are on the heatsinks. Everything is connected with 300-500V 0.5mm massieve copper wire.

The spectrabox used plastic lenses very close, almost on top of the 3watt leds.

I do a LST with scrog so my plants stay very low (max 90cm or 3 foot). The lenses are for protection of the led and maybe i want a higher tent or wardrobecloset to grow. The lenses where only $4.00 at kingbrite so i bought 5 of them with the driver and heatsinks to to experiment and justify the...

The heatsinks and led driver are delivered at my neighbours. I hope i can get my package tommorow and i bought some TIM today. I think the thermal properties of the TIM are good enough. It contains no graphite that corodes the aluminium heatsink.

Okay. This is what i want to order after thinking a lot. Can anyone tell me if i did the calculatons right? 1 HLG-185H-C1050B. 95V to 190V, 1050mA, 199.5W, constant current. This driver can run 5 CXB3590 at 1050mA. At 1050mA the CXB3590DD36V5000K has a Voltage forward of 34.89V and the...

I have the calculator up and running. That calculator is great work.

Thanks to all for the help. I will look out for the spreadsheets and all the data i need to match good drivers and write some nice software.

I would like a dimmable ip67 driver for the 4 CXB3590 2700K and a dimmable ip67 driver for the CXB3590 6500K. I want to use the raspberry pi single board computer for adjusting the power via PWM and calculating the efficiency, ppfd, lumen/watt and other parameters. Are there spreadsheets...

I don't know what is the best ppfd for growing weed. I have 4 CXB3590 2700K and 1 CXB 6500K (bins are listed in the OP) and a 60x60x150cm grow tent. If i run the 2700K leds at 1050ma each what will be the ppfd? If i run the 3500K led at 2100ma what will be the ppfd?

Hello, I am a girl from the Netherlands and i am new here and want to build my own DIY led fixture. I have: 1 : 60x60x150cm growtent 4 : CXB3590 (2700K 27G CB 80Ra 36V) 1 : CXB3590 (6500K 65E CD 80Ra 36V) 5 : Ideal holder 50-2303CR 4 : led glass lens KB-HB100-60 (60 degree) 1 : led glass lens...