Search results

Not sure I need to look at the specs I am open to other combos

Growmau5 you have been my main inspiration for doing my own build. Thank you for your help it's pretty obvious you have influenced many of us. It's nice buying a nice fixture that is ready to rock but something about making your own and designing or taking inspiration from several other builders...

Ok c1050b if I want to add a potentiometer I will see if anyone has this

I going with 1 Meanwell hlg 120h-c1050 and run two Cree cxb3590 72v version at 80w each. Not sure if there will be any issues running a potentiometer on this Driver. Also need a Meanwell apv 12-12 for a fan as well as cob holders reflectors

I'll get my list together and send him a email and see what he has available. Thank you all for your help!

I'll check it out seems like they don't have much selection for drivers atleast in the Meanwell brand im guessing there is not a one stop shop I would rather buy all from one place especially paying shipping for 3 different places it maybe cheaper to buy from the more expensive guys at the end...

Is it a flat rate Shipping?

Anyone know who has these in stock? I'm having a hard time finding them.

I going with 1 Meanwell hlg 120h-c1050 and run two Cree cxb3590 72v version at 80w each. Not sure if there will be any issues running a potentiometer on this

Not completely closed

Yes I'm going to also add a potentiometer and a fan as well

I am open to ideas

I'm guessing there is not a driver that is perfect for 2 cobs?

Seems like no mater what driver you get it's the same price lol

I decided to make a box. This is a test fit and seems like everything lines up but it needs some refinement I may cut the height down a bit. I also don't know why I made it with the angle showing on the side. I obviously need to change a few things. It's about 4 1/4 wide 3 3/8 tall and 22 inches...

Started the process ...

Do you know who sells the 72v version?

Yes I'm thinking something about that size

What combo would you recommend only using 2 cobs?

The base is 13/64 or .206 to be exact for drivers and cobs I don't want to be over $200. I cut and machined this piece to 22 inches long I figured should be more than fine for 2 cobs.