Search results

i understand that completly, but i find it hard to believe that when you are working with a the same ammount of space, that it dosnt matter wether you grow 8 large plants, or you grow 18 smaller ones

so, starting a new grow, Ill be doing a perpetual harvest using grow tents (4x4 or 5x5) 1000 watt lights, with an inline canfan to cool the lights, and another canfan for the carbon filter and air circulation. I still need to decide on the type of Hydro system to use in each tent. im trying to...

i have 3 feet long Aero-flo style square PVC channels. there are 5 grow sites in each channel with a 10 gallon rez. i want to put one sprayer on each side of the grow sites. all together 6 sprayers like the ones shown below. i want to know how many GPH? or what size pump is needed to power those...

i went back to origional designs...lol! i put in a seperate intake, made sure it was outside of the grow area so it will be fresh clean air for the lights, and im using the can fan to suck the air through my two cool tubes and exhausting all the heat into the attic. now what to do about 20...

you have a couple options, I put together my vent/filter/heat puzzle just recently. you can put one fan in each room (cooling each light if you have air cooled reflectors) then suck the air out of the rooms, and run those two separate ducts directly from the fan exhaust into a Y reducer...

ive ghetto rigged one of these things, i just cut off the cord coming from my ballast going to the bulb/reflector, and i hard wired a surge protector to it. then i took my two reflectors, both being HPS because thats what the ballast was for. and pluged them into digital timers and then into the...

that green machine is a very good suggestion, but if your a somewhat handy person its pretty easy to construct your own setup, i just made one almost the exact same as the green machine, the nice thing about those square fence posts, and PVC pipe. is that if its aero, or drip, or whatever, it...

here it is, all done. and the reason ive been absent lately

i like your method of getting the air outside. but i have a vent from a bathroom right next to the closet that i can connect it to so i will basically be pumping air directly out the roof. i have a verry small attic with rotating vents and insulation i should be good with a little extra moisture

I have decided not to go with the my original plan and i think im making this sound too complicated, But I basically just want to put my scrubber and fan on one end of the lights and an exhaust fan on the other, keeping it all inline. should i use my inline can fan at the end pulling air...

what do you think about re-routing the scrubbed air from the can fan so that it blows air into the intake side of the cool tubes. and another duct that will circulate air in the grow area.

here is a diagram of my origional idea

im working on my exhaust system for a closet build and i have 3 fans. i have a 178 inline can fan with a matching can filter, a 265 active air squirrel cage fan (noisy), and a little 6 inch inline duct fan. i need to use these fans to cool 2 400 watt Cool Tubes. and exhaust and clean a closet...

i was so scrambled. i didnt know what i was talking about. so i re wrote it, now its much better. please re read it and tell me what you think now.

just thinking of how to make one, but without all the wiring and money, and effort people put into electrical boxes with relays, switches, plugs, and time delay relays. this is my simplified version AKA ghetto flip flop setup. this is my ghetto Flip/Flop setup Supplies Ballast 2 digital...

so ive been reading, and scratching my head, and checking out grow logs.... all the usual. this is what i came up with! like i said 80 inches wide X 22 inches deep the system im going to build is a 3' long fence post (5"x5") with 5 sites (3" netpots) im gonna use an ebb & flo adjustable drain...

yes, im going to be using both 400's MH & HPS in the closet, it will be air cooled, and i really want a 6' light mover to make the most of the space and light, but we will see what the budget allowes. ive decided to use Drip feed, or ebb & flow because of the low maintinence, im going to be...

dose anyone even have a thought?

i have a grow cab: https://www.rollitup.org/grow-room-design-setup/40126-armoire-setup.html one closet that measures 6'wide x 6'tall x 2'deep (picture attached) my plan is to use the grow cab to hold my mothers, and my clones. as for the closet..... i cant figure out how to set it up. my...

im sorry rollitup. i know weve only been together for a short time. but i have needs, and i need good advice, or any advice for that matter. but its totally definatly really me.... and NOT you.