3x2' Four 36v CXB3590 @1400mA
- Thread starter GroDank101
- Start date
GroDank101
Well-Known Member
The 5 gallon soilgrown dinafem critical 2.0 yielded 133 grams, or 4.6 oz dry. I was using 175w of electricity, so by my math that's about 0.76gpw, pretty good considering this was my first scrog. 
Last edited:
Airwalker16
Well-Known Member
Congrats!
GroDank101
Well-Known Member
Thank you @Airwalker16 and now I'm just preparing for the next plants!
CallmeTex
Well-Known Member
That's a nice size harvest @GroDank101 for a 5 gal too. Great work man
GroDank101
Well-Known Member
Thank you @CallmeTex
I was in a very humid area, but I have since moved to an area with a steady humidity, almost always around 35% RH. With your area of 5sqft, you should be able to achieve impressive results with this light. @nuskool89
seedfinder lists my strain critical 2.0 as 70% sativa but I think that is incorrect because I looked on Dinafem's website. Dinafem says it's 70% indica. this is from dinafem website: "
Characteristics of Critical + 2.0 cannabis seeds
I was in a very humid area, but I have since moved to an area with a steady humidity, almost always around 35% RH. With your area of 5sqft, you should be able to achieve impressive results with this light. @nuskool89
seedfinder lists my strain critical 2.0 as 70% sativa but I think that is incorrect because I looked on Dinafem's website. Dinafem says it's 70% indica. this is from dinafem website: "
Characteristics of Critical + 2.0 cannabis seeds
- Suitable for indoors and outdoors
- Sex: feminized
- Genotype: 70% Indica / 30% Sativa
- Cross: Critical + x Resistant Critical + pheno
- Indoor flowering period: 45-50 days
- Outdoor harvest time: late September
- Indoor yield: 700 g/m2
- Outdoor yield: 900-1300 g/plant
- THC: 20%
- CBD: 0.3%
- THC/CBD ratio: 66:1 "
GroDank101
Well-Known Member
i need help with active cooling. i have 140mm pc fans and i need to run 4 of these. they all draw .24Amps. whats the easiest way to do this and which are the positive and negative wires on the fan? Thanks 
Last edited:
Airwalker16
Well-Known Member
If you can't tell which wires are which, get a 12v charger, cut the port off, split and strip the wires, and test them both ways to the fans wires. A lot of fans work either way, but this will clear that up. Make sure ya mark whats what.
Airwalker16
Well-Known Member
I couldn't find 140mm ones that ran that low amperage. Mine were all 0.5a on 2 different brands. Lucky. What brand is that?
GroDank101
Well-Known Member
Thanks @Airwalker16 I got them working. The middle wire was positive and i had to put all the negatives and tachometers of the fan to the negative lead of the power supply.
These are Corsair AF140 Quiet edition.
These are Corsair AF140 Quiet edition.
Last edited:
Sire Killem All
Well-Known Member
#18 mason string works great.