4x4 Tent, 1000w, 6"inline............ 1.5 LBS dry YIELD!!

FootClan said:
they thanks for clearing that up i new he wasnt right but i just wanted someone to confirm it thanks.........yea some one else told me that elicent fans are the most silent out of the fan options.....do you know anyting about making a box for sound damping the fan? or maybe just rapping insulation around the fan?? any ideas? and do you think one 6" 320 CFM fan will work for cooling hood AND exhausting and scrubbing at same time or am i just wishful thinking here??
Click to expand...

6" 320cfm is plenty good for a typical sized tent or room. As far as making it quieter, it gets much quieter when you have it ducted and running for some reason. With no ducting attached it sounds like I'm about to achieve lift-off. Whisper quiet with the ducting on though ;) Have you actually installed it yet?
 
smokingrubber said:
6" 320cfm is plenty good for a typical sized tent or room. As far as making it quieter, it gets much quieter when you have it ducted and running for some reason. With no ducting attached it sounds like I'm about to achieve lift-off. Whisper quiet with the ducting on though ;) Have you actually installed it yet?
Click to expand...

No i havent installed it yet .....but i have a another grow going on with a 4" and its real load even with the ducting on it......I know that 6" is ok for my size tent but im not sure that its will be ok with a scubbr hood and ducting all doing everything with one fan.....most people seems they have two fans one for exhaust and one for hoods.......someone told me that if im not going to use TWO fans that i should get an 8" fan because ill be doing the work of two fans with one fan........also i was told that going with bigger fan will be more silent because i can get a speed control and lower the RPM to what a normal 6" fan would run......i dont really want to do this becasue i already have a 6" and those elicent fans are SOOOOOO exspensive!!
 
For a 4x4, a 6" fan will handle the light and the scrubber. I have one 8" & two 6" inlines running. Plus a 6" rooster fan too. Those are all (except 8") in the attic and I can't hear them at all. When the 8" is running full tilt I can barely hear it from just outside the garage door. That only kicks into high gear when it gets hot, and the 8" cools it back down pretty quick. I'm running a 4x9 tent though. You could do the same thing with a 6" on a 4x4 imo.
 
jcdws602 said:
You can have all your exhaust fans and regular fans turn off when the Co2 is on...but if you want to have optimum Co2 levels it is better to not exhaust anything from the room at all..that is why I prefer to run two fans.....even though the noise is kinda annoying.....but I have speakers set up in my veg and flowering areas so I just bump my music and drown it out :bigjoint:



Yeah it just recirculates..I have reconfigured my exhaust almost every way possible and this is the best way I have found as far as smell goes...
Click to expand...

What are the specs on your interior fan and scrubber? Didnt you say you use a small pc fan? or was that someone else? Also, Instead of 2 fans, can't I use one fan w. multliple ducts going into it and use a damper system to shut off the exhaust to the chamber when running CO2 ? or maybe this will make more noise?
 
pkgrower said:
What are the specs on your interior fan and scrubber? Didnt you say you use a small pc fan? or was that someone else? Also, Instead of 2 fans, can't I use one fan w. multliple ducts going into it and use a damper system to shut off the exhaust to the chamber when running CO2 ? or maybe this will make more noise?
Click to expand...

For a sealed tent, you use two fans because:

One handles the lights only. Sucks air from outside the tent and expells it back outside the tent. This moves the heat from the lights to the outside of the tent.

The other fan sucks air from inside the tent (through the filter) and exhausts it back to the inside of the tent. Therefore constantly cleaning the inside of the tent air.

In this situation you need a Co2 source since the tent is sealed and bathing in it's own recirculated Co2-rich air.
 
smokingrubber said:
For a sealed tent, you use two fans because:

One handles the lights only. Sucks air from outside the tent and expells it back outside the tent. This moves the heat from the lights to the outside of the tent.

The other fan sucks air from inside the tent (through the filter) and exhausts it back to the inside of the tent. Therefore constantly cleaning the inside of the tent air.

In this situation you need a Co2 source since the tent is sealed and bathing in it's own recirculated Co2-rich air.
Click to expand...


why do you exhaust the filtered air back into the tent? why not just send it OUT of the tent? i dont understand what the advantage of keeping in back in? is this only for useing CO2? becasue you want the Co2 to stay in the tent?
 
smokingrubber said:
For a sealed tent, you use two fans because:

One handles the lights only. Sucks air from outside the tent and expells it back outside the tent. This moves the heat from the lights to the outside of the tent.

The other fan sucks air from inside the tent (through the filter) and exhausts it back to the inside of the tent. Therefore constantly cleaning the inside of the tent air.

In this situation you need a Co2 source since the tent is sealed and bathing in it's own recirculated Co2-rich air.
Click to expand...


Thanks for your patience and the full explanation. I now understand that: Assuming I exhaust my light hood, I do NOT have to exhaust my chamber if i clean & and re-circ the air inside it. However, in this set-up, how do you regulate the interior chamber temp?

And may i still ask what type of fan and scrubber you use for your interior re-circ?
 
pkgrower said:
What are the specs on your interior fan and scrubber? Didnt you say you use a small pc fan? or was that someone else? Also, Instead of 2 fans, can't I use one fan w. multliple ducts going into it and use a damper system to shut off the exhaust to the chamber when running CO2 ? or maybe this will make more noise?
Click to expand...

I use a 6 inch 270 cfm can fan for cooling 1 1000 watt and 1 400 watt light....and a 170 cfm eco plus inline fan for circulating the air...I have no experience with a damper system ...but if noise is what you are trying to avoid I seen people enclose their fans in a box to reduce noise......I think I saw it somewhere in this site if not mistaken....and the noise don't bother me 1 bit..I always have music on and speakers in all my rooms so.....
 
jcdws602 said:
I use a 6 inch 270 cfm can fan for cooling 1 1000 watt and 1 400 watt light....and a 170 cfm eco plus inline fan for circulating the air...I have no experience with a damper system ...but if noise is what you are trying to avoid I seen people enclose their fans in a box to reduce noise......I think I saw it somewhere in this site if not mistaken....and the noise don't bother me 1 bit..I always have music on and speakers in all my rooms so.....
Click to expand...

My question still the same WHY do you RE-CIRCULATE the air back inside? wont that make tent temp higher than if exhausted out of tent??????
 
FootClan said:
why do you exhaust the filtered air back into the tent? why not just send it OUT of the tent? i dont understand what the advantage of keeping in back in? is this only for useing CO2? becasue you want the Co2 to stay in the tent?
Click to expand...

Two types of systems here. Closed loop and open loop. Closed loop is recirculating the air and you're providing the Co2. This is benificial becuase you can pump the Co2 and max yield. Open loop brings in fresh air and exhausts to fresh air. No Co2 is required. Both have their benifits.

Both types can use a seperate fan for the light exhaust because there are times when you want the fan off. Its an easy way to heat the tent in the morning without using a heater and you don't want it running all night. Versus the exhaust fan which you should have ususally running.
 
FootClan said:
My question still the same WHY do you RE-CIRCULATE the air back inside? wont that make tent temp higher than if exhausted out of tent??????
Click to expand...

In an ideal world ... you would recirculate back into the tent but you would have an Ice Box attached to the air outlet. The HOT air is in the hoods, and being taken care of seperately. So if the air isn't that hot to begin with, you only need a little water chiller to keep temps under control.
 
pkgrower said:
Thanks for your patience and the full explanation. I now understand that: Assuming I exhaust my light hood, I do NOT have to exhaust my chamber if i clean & and re-circ the air inside it. However, in this set-up, how do you regulate the interior chamber temp?

And may i still ask what type of fan and scrubber you use for your interior re-circ?
Click to expand...

You can recirc the air ONLY with a good Co2 and total environment control system going. If you can't provide Co2 and cooling, you're FAR better off bringing in fresh air. I use a Can66 and a 8" Elicient inline for my primary exhaust (to fresh air). I have an open loop system.
 
FootClan said:
My question still the same WHY do you RE-CIRCULATE the air back inside? wont that make tent temp higher than if exhausted out of tent??????
Click to expand...

Actually exhausting the air from the tent through the scrubber and the hood make the tent hotter because the light produces heat...where is the heat trapped in... the tent......so then that warm air is sucked through the scrubber and hood kinda defeating the purpose of a cool hood,don't get me wrong it will run cooler than if you had no cool hood but getting the cold air from outside cools the hood and light much more efficiently......so producing less heat from the source in the first place.....if you still have heat issues with a cool hood with good set up then you would need to invest in a/c or ice box and water chillers..
 
jcdws602 said:
Actually exhausting the air from the tent through the scrubber and the hood make the tent hotter because the light produces heat...where is the heat trapped in... the tent......so then that warm air is sucked through the scrubber and hood kinda defeating the purpose of a cool hood,don't get me wrong it will run cooler than if you had no cool hood but getting the cold air from outside cools the hood and light much more efficiently......so producing less heat from the source in the first place.....if you still have heat issues with a cool hood with good set up then you would need to invest in a/c or ice box and water chillers..
Click to expand...

Yes i get that 2 fans are better than one and that pulling cool air from outsite the tent souly for the lights is great becasue it cools the lights more efficiently and it dosnt need to be filtered on its way out......the ONLY reason i want to use 1 fan is because of noise reasons in an apartment that i share with my gf.... Its 2bedroom and this tent will get its own room. I dont want (gf dosent want really) to hear it from anywhere else in the apartment .....I plann on covering everthing in foam or insualting or making a box to do what ever i have to do to make that room silent and keep temps in 70's......So im starting with one 6" 320cfm fan and im going to see what my temp will be using it full blast as follows: filter>duct>hood>duct>fan>duct>outside tent but still in room becasue i cant have ducting exhausting into the rest of the aprtment becasue the door will stay shut. I dont want to have ducting hanging out the window or even up against the screen.....people walking by would say hey look that person has a duct exhaust ending right there at his window...thats no good. Also no attic access from the spare room and gf is not giving up master closet for my grow.. so im left with just exhausting the air into the room.....Yes i know this is a problem on many levels one for temp reasons and another for fresh air reason....mabye theres a was to still use the window for exhaust but HIDE it some how ..i dont know.
i cant be cutting or putting any holes in the walls so i dont know how im going to pull this shit off...But if anyone has ever lived in an aprtemnt with there GF and had to cool a 1000w hps in a 4x4 tent silently id love to hear how you had fans running 24/7 in the next room over and her not hear it.....becasue thats what i need.
 
FootClan said:
.. so im left with just exhausting the air into the room.....Yes i know this is a problem on many levels one for temp reasons and another for fresh air reason....mabye theres a was to still use the window for exhaust but HIDE it some how ..i dont know.
i cant be cutting or putting any holes in the walls so i dont know how im going to pull this shit off...But if anyone has ever lived in an aprtemnt with there GF and had to cool a 1000w hps in a 4x4 tent silently id love to hear how you had fans running 24/7 in the next room over and her not hear it.....becasue thats what i need.
Click to expand...

First, you may need some extra equipment to pull it off succesfully. Is this a window you can put an AC in? Can you bring in a 55gal reservior and a chiller? Can you lug Co2 bottles or propane bottles into your home every couple week? Is there ANY way you can possibly cut some holes in the ceiling (inside the closet) to vent the light heat?

I'm not saying you have to do all of that, but be prepared to consider some of it and fit that into your preparations.

And "silent" is a relative term. It's one thing to cool a 100 watt cfl in a closet, it's something completely different to deal with a 1000 watts and do it succesfully. It CAN be done, but be prepared.
 
smokingrubber said:
First, you may need some extra equipment to pull it off succesfully. Is this a window you can put an AC in? Can you bring in a 55gal reservior and a chiller? Can you lug Co2 bottles or propane bottles into your home every couple week? Is there ANY way you can possibly cut some holes in the ceiling (inside the closet) to vent the light heat?

I'm not saying you have to do all of that, but be prepared to consider some of it and fit that into your preparations.

And "silent" is a relative term. It's one thing to cool a 100 watt cfl in a closet, it's something completely different to deal with a 1000 watts and do it succesfully. It CAN be done, but be prepared.
Click to expand...

I cant afford a 10,000w btu air conditioner and im not sure i would be alowed to put it in anyways and dont those things use alot of energy and are loud...i diff cant start cutting any hole in the celling if i want my deposet back...what would i do with a 55 gal bucket? and chiller? are you talking about setting up some water cooled light system? wont i need pumps and hoses wont that cost alot too....i mean im not cheap win it comes to my set up but i have to work within reason......

i could refill Co2 bottles that seems alot easyer than a window unit or bringing in chiller system what ever that is im not sure but it dosent sound easy.......but dont i need more than just the bottles dont i need a regulator and thermistat and another timer bla bla bla that would cost alot too........and if i did get the Co2 does that mean id have to run the "closed loop" system? recir the air through the filter back into the tent? isnt that would you said? and if i did do that wouldnt i need two fans....
 
Those are all various ways of solving your problem. You don't have to do them all, just some combination to solve your heat problems.

First, you said you can't exhaust to fresh air and bring in fresh air. That leaves you with ONE option. You must run a closed loop system, where you provide all of the cooling and Co2. Otherwise, your plants will not survive. The chiller and reservior can replace the AC.

Listen, you can't just go out and buy a 1000 hp motor for your car and expect to drop it in without upgrading a lot of extra parts. It's expensive to do it right. You can run a 6 hp motor without a radiator, but what do you think is going to happen to the 1000hp motor? You can get by with a cheap tranny and bald tires if you're only pushing 70hp ... what do you need to go with that 1000hp crate motor?

You went and bought a monster motor, now you'll need to buy all the extra bits or it'll blow up in your face. It's expensive. Get over it.
 
FootClan said:
...i diff cant start cutting any hole in the celling if i want my deposet back...

chiller system what ever that is im not sure but it dosent sound easy.......but dont i need more than just the bottles dont i need a regulator and thermistat and another timer bla bla bla that would cost alot too........and if i did get the Co2 does that mean id have to run the "closed loop" system? recir the air through the filter back into the tent? isnt that would you said? and if i did do that wouldnt i need two fans....
Click to expand...

Holes in the ceiling are nothing. They can be repaired in an hour with a can of spackle and some spray-on texture. Evereyone knows a handyman or three.

You really only need 2 fans if you can cut a hole in the ceiling to swap the light heat. If you've got to dump the hot air back into the room, that's more work the chiller has to do, but it can be on the same fan as the filter.
 
FootClan said:
Yes i get that 2 fans are better than one and that pulling cool air from outsite the tent souly for the lights is great becasue it cools the lights more efficiently and it dosnt need to be filtered on its way out......the ONLY reason i want to use 1 fan is because of noise reasons in an apartment that i share with my gf.... Its 2bedroom and this tent will get its own room. I dont want (gf dosent want really) to hear it from anywhere else in the apartment .....I plann on covering everthing in foam or insualting or making a box to do what ever i have to do to make that room silent and keep temps in 70's......So im starting with one 6" 320cfm fan and im going to see what my temp will be using it full blast as follows: filter>duct>hood>duct>fan>duct>outside tent but still in room becasue i cant have ducting exhausting into the rest of the aprtment becasue the door will stay shut. I dont want to have ducting hanging out the window or even up against the screen.....people walking by would say hey look that person has a duct exhaust ending right there at his window...thats no good. Also no attic access from the spare room and gf is not giving up master closet for my grow.. so im left with just exhausting the air into the room.....Yes i know this is a problem on many levels one for temp reasons and another for fresh air reason....mabye theres a was to still use the window for exhaust but HIDE it some how ..i dont know.
i cant be cutting or putting any holes in the walls so i dont know how im going to pull this shit off...But if anyone has ever lived in an aprtemnt with there GF and had to cool a 1000w hps in a 4x4 tent silently id love to hear how you had fans running 24/7 in the next room over and her not hear it.....becasue thats what i need.
Click to expand...

Well you got balls growing in an apartment complex my friend......I couldn't do it........but enclosing your fan will reduce noise and you can go to home depot buy you some wood make a frame to fit over the window make a cover for the frame out of wood or panda film or painters plastic(with panda film or black or white painters plastic it is much easier to cut a hole for the adapter than cutting a whole in wood)....get a duct adapter screw it on the wood frame...you keep your blinds on the window place the frame over the window and everything looks normal from outside..you simply keep the window cracked so the air has somewhere to go....I have this type of set up on my window...
 
jcdws602 said:
Well you got balls growing in an apartment complex my friend......I couldn't do it........but enclosing your fan will reduce noise and you can go to home depot buy you some wood make a frame to fit over the window make a cover for the frame out of wood or panda film or painters plastic(with panda film or black or white painters plastic it is much easier to cut a hole for the adapter than cutting a whole in wood)....get a duct adapter screw it on the wood frame...you keep your blinds on the window place the frame over the window and everything looks normal from outside..you simply keep the window cracked so the air has somewhere to go....I have this type of set up on my window...
Click to expand...

yea that sound like a good idea...do you have a pic of it?? id love to have an image to go with that......
 
You must log in or register to reply here.

Similar threads

C
Is this a good SOG From Seed Set up? 4x8x6.5 ... 29 plants... 2x 1000w hps air cool lights... etc
Replies
2
Views
437
Cecil_Rotem
C
F
4x4 Tent/LED Grow - thoughts?
Replies
7
Views
698
ledtime
L
Pauly1118
24’x10’ Room w/ 10x 1000w Lights
2 3
Replies
46
Views
2K
LeastExpectedGrower
LeastExpectedGrower
MFL
Carnot: DIY Heat Exchanger/“Air Conditioner” for Sealed Grow Tents
Replies
5
Views
2K
MFL
MFL
.Smoke
Dual tent/2.6kW HPS 6 month dream finished!
Replies
1
Views
296
Brandon137
Brandon137
Back
Top