600w Closet DINAFEM POWER KUSH

Im gonna guess 9.8 Oz

noted.



Some specifics for everyone.

Current res EC1.2, this has not altered in 24hours with the GHE RIPEN and CANNABOOST, i used 2.5ml per litre of the BOOST, and around 3-4ml per litre of the RIPEN .

pH was set yesterday to 5.8 , this had drifted down to 5.3 in 24hours, adjusted today back up to 5.8 .




J
 
Hey everyone,

Well its 2am here in the UK, about 20mins ago i went to check on my room, only to discover that 1 of my colas on the stocky plant has FUCKING BUD MOULD , i have removed more than just the effected part and salvaged what i could (2g) from a possible +14g bud. I then washed my hands etc and went to inspect more thoroughly,

Thankfully no more visible, i will keep my eyes open for any more. I think to help eliminate this problem on future grows i will have to add more oscilating fans at all sides of the closet.


I have taken some pics as best i can to show everyone, I will upload them tomorrow as im off to bed.




J
 
hope u get it sorted lad...
Hey everyone,

Well its 2am here in the UK, about 20mins ago i went to check on my room, only to discover that 1 of my colas on the stocky plant has FUCKING BUD MOULD , i have removed more than just the effected part and salvaged what i could (2g) from a possible +14g bud. I then washed my hands etc and went to inspect more thoroughly,

Thankfully no more visible, i will keep my eyes open for any more. I think to help eliminate this problem on future grows i will have to add more oscilating fans at all sides of the closet.


I have taken some pics as best i can to show everyone, I will upload them tomorrow as im off to bed.




J
 
How the hell did you get mold in that room? Is the humidity high where you live?

Im trying to figure that one out myself beanz. THe humidity of the room has been within perfect conditions. Lowest 45% during lights on HIghest 65% dark cycle.

The only reason i am leaning towards with this problem was that, to be honest its a little too crowded in there and i havent got any air circulation at that back end. SO i have since added a 6inch clip on fan to the tray of the WILMA pointing straight up in between all the plants from the top of the pots up through the canopy.


Update coming up.



J
 
Hey folks

Well what a fucking nightmare ive had over the last 20hours or so.

As you can see from the pictures of the BUD that has been chopped from the plant there is a dark (different colour) part of the bud in the centre this is where the mould was found. IT had taken over roughly 1inch X 2inch long area in the centre of the bud which was around 4inches wide and 8inches long.

I inspected all of the plants quite thoroughly last night and havent since found any more problems. So today i have Had a small defoliation session with a good friend, whom you may remember from my motherbox build thread, MR P DOWNWARD, and we have stripped alot of the large leaves from the centres of where the plants all meet. Creating more air between the plants. I have also fitted a 6inch clip on fan to the tray of the WILMA which points directly up through the canopy now.

I have also ceased the 3 feedings during the dark cycle to reduce how much moisture is present in the air. As each of the plants came out of the wilma for a hair cut they got sprayed down with ROT STOP from my local hydro shop, this is supposed to stop BOTYTRIS in its tracks, better safe than sorry.

Current REs Stats, EC rising slightly to 1.4, ph drifting from 5.8-5.3 still using just the RIPEN and the BOOST. I will be topping up the WILMA with just plain water with BOOST no RIPEN tomorrow to bring the pH up and the EC down, rather than using any acids etc unnecessarily.

I have arrowed the BUD in question which i had to chop off for you to see.


ANyway hope you like the pics from my fucked up evening. lol.



J
 

Attachments

  • PIC_0119.jpg
    PIC_0119.jpg
    83.2 KB · Views: 365
  • PIC_0122.jpg
    PIC_0122.jpg
    68.8 KB · Views: 217
  • PIC_0123.jpg
    PIC_0123.jpg
    81.9 KB · Views: 169
  • PIC_0124.jpg
    PIC_0124.jpg
    112 KB · Views: 175
  • PIC_0118.jpg
    PIC_0118.jpg
    94.4 KB · Views: 358
  • PIC_0117.jpg
    PIC_0117.jpg
    95.1 KB · Views: 210
  • PIC_0116.jpg
    PIC_0116.jpg
    98.5 KB · Views: 193
  • PIC_0115.jpg
    PIC_0115.jpg
    89.1 KB · Views: 242
  • PIC_0112.jpg
    PIC_0112.jpg
    124.3 KB · Views: 278
  • PIC_0112edit.jpg
    PIC_0112edit.jpg
    124.5 KB · Views: 275
  • PIC_0113.jpg
    PIC_0113.jpg
    112.7 KB · Views: 239
  • PIC_0114.jpg
    PIC_0114.jpg
    107.5 KB · Views: 292
Hey folks

Well i have been and taken some better pictures of the closet for you all.

I hope you enjoy them, current RES statistics are EC 1.1 pH 5.8 still using RIPEN and BOOST.

End of flowering week8 will be Sunday. I doubt they will be ready on sunday maybe the following sunday is more optimistic.




Enjoy


J
 

Attachments

  • PIC_0126.jpg
    PIC_0126.jpg
    91.5 KB · Views: 63
  • PIC_0125.jpg
    PIC_0125.jpg
    113.3 KB · Views: 77
  • PIC_0124.jpg
    PIC_0124.jpg
    126.3 KB · Views: 59
  • PIC_0123.jpg
    PIC_0123.jpg
    144.2 KB · Views: 68
  • PIC_0119.jpg
    PIC_0119.jpg
    124.8 KB · Views: 68
  • PIC_0120.jpg
    PIC_0120.jpg
    132.3 KB · Views: 48
  • PIC_0121.jpg
    PIC_0121.jpg
    126.9 KB · Views: 55
  • PIC_0122.jpg
    PIC_0122.jpg
    119.1 KB · Views: 42
  • PIC_0118.jpg
    PIC_0118.jpg
    100.3 KB · Views: 88
  • PIC_0117.jpg
    PIC_0117.jpg
    122 KB · Views: 61
  • PIC_0116.jpg
    PIC_0116.jpg
    95.9 KB · Views: 70
  • PIC_0115.jpg
    PIC_0115.jpg
    108.8 KB · Views: 507
  • PIC_0112.jpg
    PIC_0112.jpg
    131.8 KB · Views: 184
  • PIC_0113.jpg
    PIC_0113.jpg
    126.2 KB · Views: 3,892
  • PIC_0114.jpg
    PIC_0114.jpg
    117.3 KB · Views: 73
Thats a bummer bro..I got hit with bud rot or mold my last grow after i did final flush lost a good oz of 3 plants it sucked...I feel for ya hopefully no more
 
Thats a bummer bro..I got hit with bud rot or mold my last grow after i did final flush lost a good oz of 3 plants it sucked...I feel for ya hopefully no more


I feel your pain bro. I lost around 1/2oz from just the 1 cola it had infected, BUt i have done some serious leaf pruning to free up the space in the centre of the wilma and now also blow a 6inch clip on fan straight up through the canopy. Havent seen any more ROT yet but then i am using the ROT STOP liquid at 5-7 day intervals now. It can be used right up to harvest.


J
 
hope it getts better mate but there sum nice colas pal..very nice...

Cheers Kev,


I'm monitoring them all very closely now.


The colas have also began to swell up now, for instance "THE BEAST" cola is really piling on the weight and filling in alot more. As you can see in the pic its about 10inches long and about 5 or 6inches wide, pistils are beginning to amber off now.


More to the point i am currently sampling the 2g i managed to save, It has ben drying since monday and to be fair is pretty good lol, gonna be ALOT better after its allowed to finish dry/cure.... I am SOOOOO pleased i chose this strain for myself.



J
 
Back
Top