Ac Infinity Fan help

I’m not sure but doesn't a carbon filter help with humidity anyway? So if I set my T6 to temperature control while connected to a carbon filter humidity should decrease anyway?
 
I’m not sure but doesn't a carbon filter help with humidity anyway? So if I set my T6 to temperature control while connected to a carbon filter humidity should decrease anyway?
For me. The humidity of intake air key. Ideally near what you want in grow. Usually lower intake rh is better...vs higher.
 
Sorry what do you mean
When the fan is exhausting, fresh air comes into the tent, typically thru vents down low.
Just pointing out the temperature and RH of the fresh air coming into your tent can have a huge impact on how easy or difficult to control.
Big temp and/or rh swings = powdery mildew for me

Great info for any grower.
 
Ah you can’t control both temperature and humidity at the same time?

Is the T8 the same?
My T6 will. run if the temp OR humidity exceeds my set points.
I can set min. or max thresholds to get the fan to operate.
It will spool up gradually to max and then spool down as the conditions get within parameters.
 
My T6 will allow me to set a max OR min limit for both temp and humidity.
That means you can get it to operate if the temp or humidity is either above OR below the set point.
It won't do both(max-min) so it will run if the temps get above the set point AND it will also run if the humidity gets above the set point.
 
Back
Top