Anybody running side by side 4k rooms on a flip?

Sencha

Sencha

Active Member
Just looking for a little advice on equipment.

What are you using for a flipbox? etc

Thanks in advance.
 
Hey. Thanks for the reply. I've looked at those. I would use the 4 light model. How do you like it? Are you using it now?
 
If I go ahead and buy 8 ballasts, what light controller will allow only 4 on at a time. I've never seen this set up.
 
well, the one i listed is a flip flop for two, four light areas. you plug the four ballasts and 8 hoods into the flip. the four ballasts stay on all the time. the flip flop switches between the 8 hoods/lights.
 
Sencha, I forgot to post this in the other thread you got. Don't forget to install a high temp shutdown switch w/delay on your light controller/s, in case of an ac failure.
 
If you are going to buy 8 ballasts then just get a Powerbox 1200TD with a dual trigger. That way you have 2 trigger cords on separate built in digital timers. The whole point of the FLIP is to use half the ballasts to grow twice the plants.
 
Hi Scooby. It's good to see you. I think I am going to buy the 8 ballasts instead of the flipbox. I like that Powerbox Scooby. Is there another option with a dual trigger.

What's your bare bulb vs. air cooled opinion? I'm stuck on picking a minisplit.

My ceilings are low at 6'9", my rooms are side by side, 12 x 15. Was planning on using Magnum XXXLs for max coverage. Cooling the hoods gets me closer to the plants.
 
Sencha said:
I don't really want to use $240 worth of timers.
Click to expand...

And once you had a 1000w on a timer catch fire(timer catches fire), you wouldn't even want ONE timer like that, controlling that much continuous load. A contact relay switch is def the way to go(lighting controller) these days. Hard timers are still legit to, but no 120v trigger cord, to plug into the high temp shutdown switch, before timer :-D
 
Safety first!!! What light controller would you use Aero? I'll admit that I get a little flustered and confused when choosing equipment for a new op.
 
Sencha said:
Hi Scooby. It's good to see you. I think I am going to buy the 8 ballasts instead of the flipbox. I like that Powerbox Scooby. Is there another option with a dual trigger.

What's your bare bulb vs. air cooled opinion? I'm stuck on picking a minisplit.

My ceilings are low at 6'9", my rooms are side by side, 12 x 15. Was planning on using Magnum XXXLs for max coverage. Cooling the hoods gets me closer to the plants.
Click to expand...

I use powerbox controllers. they are the best in my opinion. they make a dual trigger version in all of their models except the 4 light one.

i always go air cooled. keeps the plants cooler, lights closer, and you don't have to clean you bulbs as often.
 
So all I would need is a, dual trigger 8 light powerbox and a couple CAP high temp shut off and delays?
 
Sencha said:
So all I would need is a, dual trigger 8 light powerbox and a couple CAP high temp shut off and delays?
Click to expand...

Yes but what delays? The delay is the temperature reading on the temp shutoff thermostat. When temperature has dropped it will come back on.
 
The cap unit also has a delay for turning on the ballasts, in case of power outage. The lights won't try to ignite for a set time adjustable from 2-60 minutes.

Mine is currently set for 10 minutes to give the bulbs time to cool before reigniting.
 
Ahh outage delay. Popped an off delay timer in my controller. Delays restrike for 5 minutes from time power goes off. 5 minutes should suffice, never had it not.
 
You must log in or register to reply here.

Similar threads

E
Design assistance
Replies
6
Views
427
EduardoCorochio
E
Headgrinder
Anybody have any suggestions for replacing the BONG?
Replies
6
Views
285
Headgrinder
Headgrinder
C
New room / tent problem solving
Replies
7
Views
522
coreywebster
coreywebster
Blue brother
Air circulators for 10x10 room
Replies
10
Views
813
coreywebster
coreywebster
AlmightyJumpman
What light should I get for a bigger tent?
Replies
0
Views
94
AlmightyJumpman
AlmightyJumpman
Back
Top