BHO with Vacuum oil/wax tutorial

Haggard

Haggard

Well-Known Member
vacpurge said:
those top two pictures are related to the "smoking a half gram hoot" thread.... well my friends, that delicious little dot is a half gram.... theres no fucking way someone can smoke that much in 1 hit... that is the size of my whole nails head!!!

the white outside stuff is delicious bubble hash that I posted in crybaby rizes thread. it had a tiny tiny tiny dot of mold forming on it and he got offended and erased all my pictures.

stuff in the vials is for my buddy that brought over the 2 lbs of trim... he wanted it in 1g vials.

I ran 50 grams... got 2g back. 4% yield
I then ran 90 grams, got 4g back... 4.4% yield.
then I ran the rest of the 250 or so grams that were there and got a 7g return. less than 4% I believe.

so my totals on that were 390 g dry material in. used around 15 cans of butane, and got 15g back.

he also brought 90g of botom of the bag stuff, which yielded 13 grams,

so I got 28 grams of oil for him. he said split 3 ways... so ill take 8 gs. they can each have 10 vials. ill take my 8gs in the form of the biggest chunk on the above picture.. it was made with the good stuff ;)

can you believe that there is near 700$ worth of extract on that paper!!
Click to expand...
I beg to differ, you just need a bigger nail :) : [video=youtube;SDwDR3bJnJY]http://www.youtube.com/watch?v=SDwDR3bJnJY[/video]
How long are you purging for because it looks like it can go longer on your half gram dot, and that's the best looking thing on that paper....

That video was filmed at an event we held in downtown LA called
The Secret Cup secretcupbackfinal.jpgSECRETCUPfinal320.jpg
We're throwing another event in downtown LA this weekend with lots of heady goodies in store:
www.beyondboro.com 941729_10151678502132363_2114918736_n.jpgflyer reverse-page-001.jpg
 
Guzias1

Guzias1

Well-Known Member
what the shit. hes a robot. just dabs after dabs, and they chunkssssssssssssssss. he must have some serious medical related issues, maybe its in the brain..

vacpurge said:
can you believe that there is near 700$ worth of extract on that paper!!
Click to expand...
thats why we makin our own, this stuff is stupid expensive at dealers, clubs..
 
vacpurge

vacpurge

New Member
damnnn thats a big hoot!!!! I know I need a bigger nail.. just no idea what or where to get a nice set up.

what do you guys recommend for someone with a straight vertical 14mm female piece as the last piece in my bong? I like the HE v3 nails, just not sure what dome set up to use.

I think it was briefly vacuum purged. that was just some random stuff I had made for a friend from his junk trim, plus some hash I had kicking around. once that paper is gone I will start making oil from bud again and aim for some real nice stuff! winterized only. doesnt look pretty on a sheet of paper or film. but its very smooth and potent. everything on there is shatter as well as the winterized stuff

and thats a lot of fats. how much oil was that?
 
Haggard

Haggard

Well-Known Member
vacpurge said:
damnnn thats a big hoot!!!! I know I need a bigger nail.. just no idea what or where to get a nice set up.

what do you guys recommend for someone with a straight vertical 14mm female piece as the last piece in my bong? I like the HE v3 nails, just not sure what dome set up to use.
Click to expand...
Highly Educated probably makes the best ti products, next to ti power and dab essentials. The nail in my video was a dab essentials 14mm dome-less. (http://www.dabessentials.com/14mm-domeless/) dab_14mm_l.jpg
Currently im waiting for a HE 10mm dome-less nail to arrive (http://aqualabtechnologies.com/highly-educated-v2-domeless-titanium-nail-10-mm.html) alt_8-25-12-72.jpg
for my new micro rig/pendant :)975523_594363790595731_1914546063_n.jpg

But until then im using my 14mm adjustable grade 2 ti nail i copped from my local smoke shop that replaced my first small baby ti nail. IMG_20130220_084035_318.jpg
 
vacpurge

vacpurge

New Member
hmmm. I like this one: http://www.dabessentials.com/14mm-domeless/ thats pretty cool.

I like something like your last picture (I assume it has a globe that goes over it) but I am not sure about having the nail on an angle like that??? seems the oil would just drip off.

I am thinking this: http://www.ebay.com/itm/14mm-to-18mm-Double-Double-Ended-Male-Adapter-/161019497730?pt=LH_DefaultDomain_0&hash=item257d828d02 or http://www.ebay.com/itm/Double-Male-Adaptor-18-8mm-14-mm-for-Vapor-Globe-Oil-Dome-/140988593639?pt=LH_DefaultDomain_0&hash=item20d39335e7


with a big 18mm dome and a nice new nail with a deep dish. would a normal nail work with that 18mm end piece or should I get a 14mm male to 14mm male piece?

or I can just buy a whole set up but am not too sure if a v3 nail would fit in it nicely?

http://www.ebay.com/itm/18mm-Oil-Dome-18-18-Adapter-with-Titanium-Nail-adjustable-90-degree-/130919181267?pt=LH_DefaultDomain_0&hash=item1e7b642bd3
 
Haggard

Haggard

Well-Known Member
vacpurge said:
hmmm. I like this one: http://www.dabessentials.com/14mm-domeless/ thats pretty cool.

I like something like your last picture (I assume it has a globe that goes over it) but I am not sure about having the nail on an angle like that??? seems the oil would just drip off.

I am thinking this: http://www.ebay.com/itm/14mm-to-18mm-Double-Double-Ended-Male-Adapter-/161019497730?pt=LH_DefaultDomain_0&hash=item257d828d02 or http://www.ebay.com/itm/Double-Male-Adaptor-18-8mm-14-mm-for-Vapor-Globe-Oil-Dome-/140988593639?pt=LH_DefaultDomain_0&hash=item20d39335e7


with a big 18mm dome and a nice new nail with a deep dish. would a normal nail work with that 18mm end piece or should I get a 14mm male to 14mm male piece?

or I can just buy a whole set up but am not too sure if a v3 nail would fit in it nicely?

http://www.ebay.com/itm/18mm-Oil-Dome-18-18-Adapter-with-Titanium-Nail-adjustable-90-degree-/130919181267?pt=LH_DefaultDomain_0&hash=item1e7b642bd3
Click to expand...
Yes my nail adapter joint on that piece is 14mm to 18mm and I have a couple domes for it. The straight joint adapter is fine when im lounging back on my couch and tip the bong at an angle to rip it, the nail becomes level, but I currently changed back to an angled joint.
IMG_20130506_184040_603.jpg :) AND Ive owned all those joints you posted, I'd go with the jointed one that is 14mm to 18mm to get less airspace but fit a huge nail to smoke slabs on. :)

But now I gotta buy a 14mm to 10mm joint adapter to fit this bong since I got that HE 10mm dome-less on it's way here this week. http://www.highpriorityglass.com/brands-p-t/van-tran-10-2-14mm-male-adapter-black-dot/
 
vacpurge

vacpurge

New Member
Guzias1

Guzias1

Well-Known Member
Damn dude. How are your pumps going out? You ever change the oil? Im still on my first 3cfm pump. She's a turtle, but still crawling :)

going for 7cfm plus next time
 
Haggard

Haggard

Well-Known Member
vacpurge said:
cheap pays twice... buy a real pump!!! 4 of them.. you gotta be over 400$ deep into them now?!

speaking of cheap. 37$ + shipping seems a little pricey for a simple joint!!! those 14-10s are hard to find.


I think im gonna get this one http://www.ebay.com/itm/18mm-Oil-Dome-18-14mm-Straight-Connector-with-Titanium-Nail-Adjustable-/130919182179?pt=LH_DefaultDomain_0&hash=item1e7b642f63

with a nice t3 nail and call it good enough.

also, is heating ti with propane torch bad?
Click to expand...
That set up will work fine, local smoke shops sell those same joint an dome set ups for between $30-$40, if anything look into getting a dome with a handle because they tend to get hot after multiple back to back rips. I've used this same dome an nail set up for almost 2 years now. I heat with propane, it's fine as long as you don't heat til its a completely bright red nail. The controversy over butane (2500degrees) vs propane (3500degrees) is that one heats a nail too hot so it encourages the oxidizing of the titanium (which for the record oxidizes slowly over time at atmospheric temps) So, I use butane or propane torches, just get the nail til you start seeing a slight red and then slab it up!


"Twitch", Im also curious how you keep burning up vacuum pumps making such a small amount of oil? What pump are you using? I have a FJC 3cfm 2stage over a year old that i just change the oil on regularly and it still runs like the first day I bought it.
 
vacpurge

vacpurge

New Member
ok can you teach me more about nails? I believe my set up is just a cheap nail off ebay and I dont think its even titanium.

ive heated it to a bright red glow before trying to smoke hash off of it. how do I know if my nail is oxidized? whats so bad about oxidization?
 
Twitch

Twitch

Well-Known Member
i have an extended warranty on it so i have bought 1, its the us general pump from harbor and freight, but yea i have oil i keep them oiled up, its the electrical in the handle that burns up i had my on off switch melt in 2 of them, the first one i think the oil was real old that one burnt up along time ago. this one was working and i turned it off and let the air back in the chamber and then i let it sit for 5 to 10 mins, then i went to turn it back on and it wouldn't turn back on.... flipped the switch tried different plugs, then i plugged it in and it turned on so i hooked up my chamber let it wax this stuff up and then i turned it off it wouldn't turn back on. i am pretty sure its the electrical in the handle

haggard, small amount of oil? i think i had a vac chamber before most the people on the thread... not trying to step on toes
 
Haggard

Haggard

Well-Known Member
vacpurge said:
ok can you teach me more about nails? I believe my set up is just a cheap nail off ebay and I dont think its even titanium.

ive heated it to a bright red glow before trying to smoke hash off of it. how do I know if my nail is oxidized? whats so bad about oxidization?
Click to expand...
Here is an article that might help you out. (http://www.highlyeducatedti.com/blog/?p=155) Stick with companies that are known to get a trusted ti product.
 
Haggard

Haggard

Well-Known Member
Twitch. said:
i have an extended warranty on it so i have bought 1, its the us general pump from harbor and freight, but yea i have oil i keep them oiled up, its the electrical in the handle that burns up i had my on off switch melt in 2 of them, the first one i think the oil was real old that one burnt up along time ago. this one was working and i turned it off and let the air back in the chamber and then i let it sit for 5 to 10 mins, then i went to turn it back on and it wouldn't turn back on.... flipped the switch tried different plugs, then i plugged it in and it turned on so i hooked up my chamber let it wax this stuff up and then i turned it off it wouldn't turn back on. i am pretty sure its the electrical in the handle

haggard, small amount of oil? i think i had a vac chamber before most the people on the thread... not trying to step on toes
Click to expand...
What was in the picture was a small amount of oil. Assuming it was a mechanical issue, I wondered how your pump quit if your pump was oil filled and ready to go, but seeing that you're having an electrical issue than a mechanical issue, it doesn't really matter what the amount being purged is. Wasn't knocking anything about your tech, just intrigued with others trial an error to avoid it myself. :) I've heard good things about harbor freight, thank goodness for that warranty!
 
Guzias1

Guzias1

Well-Known Member
Twitch. said:
i have an extended warranty on it so i have bought 1, its the us general pump from harbor and freight, but yea i have oil i keep them oiled up, its the electrical in the handle that burns up i had my on off switch melt in 2 of them, the first one i think the oil was real old that one burnt up along time ago. this one was working and i turned it off and let the air back in the chamber and then i let it sit for 5 to 10 mins, then i went to turn it back on and it wouldn't turn back on.... flipped the switch tried different plugs, then i plugged it in and it turned on so i hooked up my chamber let it wax this stuff up and then i turned it off it wouldn't turn back on. i am pretty sure its the electrical in the handle
Click to expand...

i've heard of people burning out the switches.
I dont use my switch, i straight bury my pump under blankets. SO its covered during full operation. I control the power by plugging/unplugging the power cord to an extension cord in wall. makes easy simple operation, no problems. no ignitable gasses are around, so its chill.

Twitch. said:
i think i had a vac chamber before most the people on the thread.
Click to expand...
oh yea, i wants to know when you first purchased your vac. do you still have the original first pump vac receipt? some how get exact date!
tis crucial to see how deep "most people on this thread" goes :cuss:

I just looked mine up thanks to amazon history, i started using mine July 6th, 2012. dayum. that means ive been vac purgin for almost a year. yeeee. must..make...more...budddah
 
vacpurge

vacpurge

New Member
"Over time a nail head can become so oxidized that it has lost much of its original heat retention capabilities"

ahhh. that right there is why my nail goes from glowing red to cold in like 5 seconds!!!

so on the cheap no name "ti" nails... what are they made out of? stainless steel?

now I know those old school butter knives that we all started on that had the tips completely grey from being red fkn hot so many times... thats the oxidization!!!

my nail is COATED in it. time for a new one. the ebay seller that I am buying the glass from said this when I mentioned buying a v3 " I'm sorry you will be buying their over priced product I can assure you my nail is the same quality if not nicer. I machine my own Nails In Michigan. I handle many larger distributors accounts already. I also have 4 removable pcs fully adjustable nail with a huge Dish for BIG Dabs. I'm a dabber myself so I like the deep dish design "

its kinda got me thinking.. I havnt bit the bullet on the 80$ HE v3 one. but for his I can get it for 10-15$ which seems too cheap for real TI.
 
You must log in or register to reply here.
Top