Chilled x6

all fixed
 

Attachments

  • image.jpg
    image.jpg
    5.3 MB · Views: 35
  • image.jpg
    image.jpg
    2 MB · Views: 38
  • image.jpg
    image.jpg
    2.2 MB · Views: 37
  • image.jpg
    image.jpg
    2.9 MB · Views: 32
  • image.jpg
    image.jpg
    3.2 MB · Views: 39
  • image.jpg
    image.jpg
    3.5 MB · Views: 43
Last edited:
I appreciated that man ^ I have that problem is mine has exposed wires on power cord and other side don’t know what goes where and I got the extra 7ft cable
 

HLG-600H-54B RC+ lead

looking at the HLG-600H-54B for a build i'm working on and i saw these RC+(brown) and RC-&GND(black) and +5Vse(Yellow) leads i'm new to electronics and I haven't seen them on any of the smaller drivers I've worked with can someone please explain what they are and what to they do? thanks in...
www.rollitup.org
 
Kindbuds303 said:
Controller he said wasn’t compatible with this model smfh man I’m kinda pissed cause I wanted a control and said wasn’t for this model but will come out later can u show me what your talking of some else I gotta buy fml lol
Click to expand...
I think the controller cables is for another type of controller, not the chilled one. Its down to meanwell, not chillled. I think iits calllled rs232 or something? No experience with that i run lower wattage drivers.

Kindbuds303 said:
See below
Click to expand...
Second pic here, should be ac cabling. Just. Connect to a grounded ac cable/plug, samme colors afaik.
First pic: bottom 2 are outputs, i think you gget 300w each. Next going up is for connecting a dimmer. Top cables are for the controller i expect. Only the outputs are live, the others can be left with a bit of electrical tape.
 
You must log in or register to reply here.
Back
Top