Dr.Nick Riviera
Well-Known Member
you need at least 4500 btus for every 1000 watt gavita, a 18,000 btu works perfect.my room is 10x10 with 4x 1k gavitas, how big of ac system do i need? Thanks!
you need at least 4500 btus for every 1000 watt gavita, a 18,000 btu works perfect.my room is 10x10 with 4x 1k gavitas, how big of ac system do i need? Thanks!
I completely disagree.There is absolutely ZERO need to do an air exchange with a sealed co2 room. When you open to hit your door doing work will be good enough. Been running co2 for about 9 cycles now.
I haven't done one in about 6 yearsIve never done an air exchange in over 3 yrs. There is no need to.
What is your RH % in flower bro?The bdac-2 and AP master controller have inputs for cooling, heating, deheuy, co2 regulator, and fan/exhaust option.
Just remember, these units have a 14amp max input.
I run customized temp settings, even with co2. I don't buy into the whole"run your room hot with co2" crap. Epic fail with 4lbs of fluffy garbage from too hot.
Week 1 From flip to week 6, ambient temps 81* 1.5' under each bulb. Weeks 7/8, 77* lights on. Weeks 9, 75* lights on, 70* lights off. Week 10, 70* lights on, 65 lights off. I run 1000 ppm from flip to week 8. After week to chop, drop ppm to 500. Perfect runs every time.
?? Your plants use up co2 during lights out? Your co2 should go up during lights out.....When my lights go off my levels are 1300 PPMs. Before lights on my levels are 900-1100 ppm's.
65% weeks 1-7What is your RH % in flower bro?
Thanks.65% weeks 1-7
7+ 50%
?? Your plants use up co2 during lights out? Your co2 should go up during lights out.....
Your room isn't that sealed then, plants release co2 at night so your co2 should be higher at lights on then it was at lights off. My co2 turns off 30min before lights out if it didn't my 1200ppm would be 1500+ when the lights come back on.I'm in a sealed room. I suspect it dissipates when lights off
I guess it's not sealed thenYour room isn't that sealed then, plants release co2 at night so your co2 should be higher at lights on then it was at lights off. My co2 turns off 30min before lights out if it didn't my 1200ppm would be 1500+ when the lights come back on.
Im pretty sure Co2 doesn't dissipate.