COB LED DIY Build Journal

With the fixture turned up all the way it is drawing 285 watts and 2.37 amps at the wall. Dimmed down to the lowest setting it is drawing 36.3 watts and .36 amps at the wall.
 

Attachments

  • image.jpeg
    image.jpeg
    425 KB · Views: 66
  • image.jpeg
    image.jpeg
    425 KB · Views: 66
  • image.jpeg
    image.jpeg
    522.2 KB · Views: 63
  • image.jpeg
    image.jpeg
    622 KB · Views: 63
I wired up my Soler Palau TD-100XS at the lower 100 CFM setting. It works and seems very quiet. I need to install that and my carbon filter before I hang my grow light. But, it will be nice to actually get the grow light up and hanging in the closet. It will be great to see how bright the closet is with the reflective walls. The goal is to be up and growing by the fall.
 

Attachments

  • IMG_3188.JPG
    IMG_3188.JPG
    877.6 KB · Views: 71
HydroRed said:
Awesome build man. I pulled a couple ideas from this for a future build. Thanks for sharing!
Click to expand...
Cool, I'm glad I could contribute in some way. I know I'm just doing the basics that I learned from all the other builders here that are much more advanced. But, I think I bring a good eye for design and my work is fairly well crafted. Okay, that was my small brag. I think I will now start a grow closet thread and document putting that together. I have a couple modest ideas for setting it up.
 
And here is the fixture with the cover attached and ready to go. It's sort of neat to look through the ventilation holes and see the COB reflectors glowing in there. I'm also getting good air flow through these perforations.IMG_3198.JPG
 

Attachments

  • IMG_3199.JPG
    IMG_3199.JPG
    745.7 KB · Views: 67
  • IMG_3200.JPG
    IMG_3200.JPG
    1.3 MB · Views: 64
  • IMG_3201.JPG
    IMG_3201.JPG
    1.4 MB · Views: 70
Looks really nice! :clap:

Have you tested with a heat gun the surface of the cobs when running for awhile to see what the temps are at different amp settings?
 
Uberknot said:
Looks really nice! :clap:

Have you tested with a heat gun the surface of the cobs when running for awhile to see what the temps are at different amp settings?
Click to expand...
That's a good idea. I don't have a heat gun, but will get one once I get the closet up and running and I will do some test runs on everything to dial in the climate. This will definitely be good to know. Hopefully I will get a little bit of heat from the light. I'm growing in the basement and the average temperature in the fall and winter is around 65 F, so I want the light to raise the temperature a little bit. Worst case is I do have a wall heater in the basement and can raise the overall temperature that way if needed.

Once I get the light hung up, I might run it for a day and get a sense of how warm the light gets.
 
PDX Joe said:
That's a good idea. I don't have a heat gun, but will get one once I get the closet up and running and I will do some test runs on everything to dial in the climate. This will definitely be good to know. Hopefully I will get a little bit of heat from the light. I'm growing in the basement and the average temperature in the fall and winter is around 65 F, so I want the light to raise the temperature a little bit. Worst case is I do have a wall heater in the basement and can raise the overall temperature that way if needed.

Once I get the light hung up, I might run it for a day and get a sense of how warm the light gets.
Click to expand...
You're running those cobs hard as fuck. I would be very surprised if it did raise temps.
 
Ya, your gonna get some nice ambient heat from it. Likely to put you right in your temperature "sweet spot" in the cooler basement temps. The light came out pro man. Looks very clean -Well done!
 
Okay, I need some help with my climate control and ventilation. I've fired up the COB grow light in the closet and have been running the oscillating fan and the inline fan and taking temperature readings in the closet and outside the closet. The closet is running a bit too hot at around 85F degrees with the intake air at 71F degrees. So a temperature difference of around 14 degrees.

I also took temperature readings with the carbon filter removed and temps were around 79F degrees in the closet and a temperature difference of around 8 degrees between the closet and the room. So it seems I'm getting too much resistance from the carbon filter and not enough draw from the fan.

Here is a sketch of the setup. I'm wondering if I should go with a larger carbon filter, or go with a more powerful fan and larger carbon filter, or maybe even upgrade to a 6" fan and larger filter? Does anyone have any thoughts? I'm assuming a good grow temperature would be around 80F for LED growing.

image.jpeg
 
You must log in or register to reply here.
Back
Top