Or_Gro

Well-Known Member
Following closely on your uv dosage, show us how to do man, I’m ready to add some bulbs in the other tent.

Plants are so vibrant and green the qb96s are killer! / curious on your ec/ph what are your running at this stage?.....looking gorgeous
Except for pH and garden friendly fungicide (more concentrated and less expensive version of hydroguard), they, have been running exclusively on clonex cloning solution @1.2 ec since they were first cut.

When i transplant i will change over to my standard technaflora nutes and ramp to 2.2 ec by 12:12. For me nutes are nutes, a necessary evil, which i don’t pay much attention to, except for ec, pH, beneficial bacteria....

@Randomblame and i are trying to figure out how to get enuff uvb without damaging the plants. I will be mentioning uvb on this thread, but we are stumbling through the dark on how to make it work...not as clearcut as red/deep red/far red...one of the issues is how to control intensity...rb is planning to add dimmable ballast to his t-5s, i’ll do same if i can figure out (with his help) which ballast to use on my 2’ and 4’ t-5s, AND how to wire them.

The reptile bulbs are great for acclimation, but just don’t have the intensity for ramping up; the agromaxes are too strong if you don’t have lots of height to manage intensity.

I’m gonna be working on a DLI approach (same target intensity per day, but spread over full lightson period, allowing for lower intensity at any given time, to reduce uvb damage).

The 96s are fucking great for veg. The color temp is about 3500k, with that huge blue spike...and those reds, with addition of supplemental far red, should do well in flowering...i’ll get a peek at this in about 10 days when i turn on the far red for the mothers of these clones...will run for both emerson and initiator effects....
 
Last edited:

Or_Gro

Well-Known Member
Day 12: Off with their heads!

Before:
3368DED1-C688-42BB-8A37-75E46ED9B323.jpeg 8232DCE6-79F8-415A-8394-9383BC70EA08.jpeg C555B095-6E8E-4FAB-92E3-D8DB7D758E55.jpeg

After:
BBB956B5-ADD0-4205-A881-788A0D83F5D4.jpeg E14D9CF0-EBF3-40E7-AFC4-47CBDEDEDC18.jpeg C6B2D5D4-812D-4FC5-9EC1-7E3146218296.jpeg

Removed everything except for laterals on 2 node pairs, including stem fans from the remaining laterals.

Will let them recover a day or three, then make the cull decision, transplant the winners to final reservoirs, then make final decision on which of remaining node pair to remove....then mainline for 8 mains, then 12:12....


Gettin there..
 

Or_Gro

Well-Known Member
About as ready as i can get for transplanting clones later this week.

Buckets w tiedowns, lids, wheels, airstones, hosage, and pumps ready to go:
B42A036C-9C92-4D35-8346-742353ED620D.jpeg

Will be testing out a new water system (forgot who to credit), this one removes everything, then adds back cal-mag...
01512F97-0230-4971-9607-A8BFBC18524F.jpeg

Fun times ahead....
 

Or_Gro

Well-Known Member
Day 12: Off with their heads!

Before:
View attachment 4268371 View attachment 4268372 View attachment 4268373

After:
View attachment 4268374 View attachment 4268375 View attachment 4268376

Removed everything except for laterals on 2 node pairs, including stem fans from the remaining laterals.

Will let them recover a day or three, then make the cull decision, transplant the winners to final reservoirs, then make final decision on which of remaining node pair to remove....then mainline for 8 mains, then 12:12....


Gettin there..
They bounced back by mid-afternoon:
33D1FD17-26BC-477A-BB3A-6F4BF550C378.jpeg

After a good look at what they had to offer, i finished the job:
9423A4C1-6937-4B52-A728-0CC3F6348D24.jpeg

Left the best/best-positioned pair of laterals on each plant.

A couple, 3 days and cull/transplant.
 

Or_Gro

Well-Known Member
They bounced back by mid-afternoon:
View attachment 4268710

After a good look at what they had to offer, i finished the job:
View attachment 4268712

Left the best/best-positioned pair of laterals on each plant.

A couple, 3 days and cull/transplant.
Day 13: Girls praying at lightson
E2406A1C-FEAC-4776-B099-C9AC2D73C1E6.jpeg

Signaling they’re ready for training to begin...so, whipped out my nuts
3202AAF7-682D-4416-9EA7-1C00BBB422E5.jpeg

F4C93F8D-09C3-475E-A25D-09077ED5E467.jpeg

Probably be able to do 2nd of 3 toppings by beginning of next week.
 

Or_Gro

Well-Known Member
Last edited:

Or_Gro

Well-Known Member
R O spells go:

View attachment 4269613

As soon as this bad boy pumps thru 1st 10 gal of “good” water, i’ll start collecting for the transplant....then the cull begins...

(Btw, in case you are wondering, this system requires a plywood stand with big holes in it.)
Whaddayathink, got enuff airflow in the buckets?

D7192E26-628D-4C7B-9EDB-918A317E0FB0.jpeg
I believe this is what's called “roiling”....lol

Switched from ec to ppm to check filter system remineralization....spot on...30ppm...pH 7.1...
 
Last edited:

SMT69

Well-Known Member
Whaddayathink, got enuff airflow in the buckets?

View attachment 4270085
I believe this is what's called “roiling”....lol
nice, how you likeing the r/o banger, i need one- where'd ya get it ?
(i been using the water from my dehumidifier! maybe not the smartest but its been better than my tap. Dehuy comes out at 12ppm 7.8ph but i worry if it messes with anything...anyways...))
 
Last edited:

Or_Gro

Well-Known Member
nice, how you likeing the r/o banger, i need one- where'd ya get it ?
(i been using the water from my dehumidifier! maybe not the smartest but its been better than my tap comes out at 12ppm 7.8ph but i worry if it messes with anything...anyways...))
The dehumidifier water is basically distilled, the reason i don’t use mine is because it probably has some elevated level of bad microbes. it would be difficult to keep mine clean enuff, for various reasons.

Got my system based on recco from a grow bud on GC, ordered it from amazon. There probably are great diy systems, using std components, i didn't want to spend tume learning to build one, so i bit the bullet and bot what my bud has.

I’m happy with it; once it gets going it’s about 50:50 useable:unusable, and puts out a gallon every 5-6 mins at ~7pH with 30ppm cal-mag.

It’s no fun making 60 gal like i needed, but its doable if you’re concerned about your water’s ppm (pH isn’t a big deal, you can pH up/down; r/o is only way to get ppm down, unless you’re diluting it with distilled water).

My tap water is 200-300ppm, which works for me; but a bud claims it’s a night-n-day difference. So I am testing for myself; nothing scientific, just seeing if i can see a difference.

156AE6D4-6E68-4684-B2C3-23027104A48F.jpeg
 
Top