First time hydro, going to try Ebb/Flow - is this a reasonable plan?

Major Blazer

Major Blazer

Well-Known Member
Demetrius Powell said:
Congrats I use 1 gallon square pots what I use to do was create a mother from fem seeds then throw my clones under 12/12
Click to expand...
That's exactly what I did but I did let them veg for a bit just to top them once and supercrop once (10 days total veg) for scrog readiness.
Demetrius Powell said:
General hydro is my favorite brand I like to keep things simple
Click to expand...
GH as well, Maxi bloom but I've added GH Silica, a splash of cal-mag (only bc I saw a deficiency - I use tap water), and cx hydroponics regen-a-root.
 
ANC

ANC

Well-Known Member
IMG_20180927_130755s.jpg
Don't think I'll get to those clones today, but there is no rush. Had to do water change in the reservoir and cut new clones and clean up the big plants a bit. So, I have been keeping a bit busy.

I just wanted to post this quick root shot of what is happening under the batting.... A 2" thick root carpet...with roots like that, who needs a medium?
 
Last edited:
D

Demetrius Powell

Active Member
ANC said:
View attachment 4206059
Don't think I'll get to those clones today, but there is no rush. Had to do water change in the reservoir and cut new clones and clean up the big plants a bit. So, I have been keeping a bit busy.

I just wanted to post this quick root shot of what is happening under the batting.... A 2" thick root carpet...with roots like that, who needs a medium?
Click to expand...
If it ain't broke don't fix it those roots look super healthy bro
 
  • Like
Reactions: ANC
ANC

ANC

Well-Known Member
IMG_20181009_155336s.jpg
OK, I should probably have done this over the weekend already but didn't know it will get so hot so quickly.
Here is the T that will feed the top end.

IMG_20181009_155354s.jpg
It is just a simple screw-in nozzle with quite a large hole so nothing can get clogged.

IMG_20181009_155942s.jpg

you will need a pump and timer too.
 
ANC

ANC

Well-Known Member
local garden suppply... it is called a spike adaptor on the label.. it is just a hole realy...
You could probably just drill. 1/8th holes in a tee pipe...
 
ANC

ANC

Well-Known Member
IMG_20181030_143815s.jpg
Look how big our clones are now, almost no light reaches the floor.
Well, they got a big haircut after I took the pics as I needed a bunch of clones.
 
ANC

ANC

Well-Known Member
I forgot to post here for a while, I need to take a pic tomorrow, it is basically a month from that pic was taken. The place is overgrown despite me taking a bucket full of clones 3 weeks ago.
The previous run was a bit shitty, I should have measured pH and ppm. By the time trouble set in, we already hit the stretch phase, and then it just stopped. I took everything down and got 200g sellable grade weed and not much else, due to pretty ruthlessly culling unwanted buds.
 
ThaMagnificent

ThaMagnificent

Well-Known Member
ANC said:
View attachment 4205654 View attachment 4205655 View attachment 4205656
Here are some more pics.
You can see the cuttings are held in place with neoprene foam I cut out of a children's play mat.
You can put more than one cutting in a disk, it is OK the plants are small.
Once rooted, transplant them into rockwool cubes that have been pH adjusted and finally watered with a feeding solution at clone strength... I cheated and used the organic feed I normally use in coco.
Click to expand...
What do you make the holes with and what medium do you plug with?
 
ANC

ANC

Well-Known Member
ThaMagnificent said:
What do you make the holes with and what medium do you plug with?
Click to expand...
I use a downlighter drill kit (It is cheaper than hole saws) and comes with a number of sizes in the box. Remember to deburr your holes so your foam sits flush.
My disks were cut from a neoprene children's playmat. The type that has the puzzle edges.
 
ThaMagnificent

ThaMagnificent

Well-Known Member
ANC said:
I use a downlighter drill kit (It is cheaper than hole saws) and comes with a number of sizes in the box. Remember to deburr your holes so your foam sits flush.
My disks were cut from a neoprene children's playmat. The type that has the puzzle edges.
Click to expand...
what medium did you use to transplant into the hole?
 
ANC

ANC

Well-Known Member
No medium, I am confused are you talking about the cloning bucket?
The tray has 4x4 rock wool cubes on 3/4" polyester batting covered in panda film.
 
ANC

ANC

Well-Known Member
IMG_20181203_194703s.jpg IMG_20181212_100004s.jpg
That bank of hydro moms are working out great. I took almost 50 clones last night and it hardly made a dent in the bush.

Pics were taken 5 days apart
 
You must log in or register to reply here.
Top