please help! i can not get my CAP ebband grow to drain back into the resivor, any ideas
Nice setup. How have your yields looking?It's hard to get the hose on the pump. It probably just came off
I did a video of my ebb and grow setup. Check it out http://www.youtube.com/watch?v=z5gU8EDqDkg
Please rate it
Thank you. This is my first grow, so no yield data is actually available. I can tell you that I expect 2½-3½ lbs. Follow my journal and find out if I'm right.Nice setup. How have your yields looking?
5 gal buckets and 10 gal control unit are not included in the CAP ebb & grow system. That's the topic of this thread btw. Other than that, how are you going to fill FOURTY buckets with 32 gallons of water?hi to everyone hope all is good ive been contempating growing like this for a while now and finally decieded to go for it I have grown in soil before but if I have too I well never grow again lol. Anyways this is what I have in mind in two rooms 40 5 gallon home depot buckets, hydroton inside the buckets,32 gallon res., 10 gallon control bucket. 3 1000 watt hps in one room and 3 1000 watt hps in the other. venus flytrap is the strian vegged for 4 weeks
my question is
on what time intervals do I flood and how long do the pots stay flood for
how many pots does a 50lt hydroton bag fill
what nutes are the best for this kind of system
And I have gotten 2oz per plant in soil with this light setup before will I yield alot more with this system
Mine does that when I start a crop. When this happens it is because of air in the pump. Turn the pump upside down and sideways under the solution to get the air bubbles out.i just hooked up my ebb and grow for the first time and i cant seem to get the buckets to drain back into the resivor, the pump sounds like it is running fine i even switched the pump from the resivor to the control bucket to see if it was the pump but that still would not work, any suggestions or thoughts, please help
i got some from there one time thats it, but you may be better off buying the extension, think about it, your going to need a hole saw to make a good hole, the grommets and connectors are like .50 each plus spray paint the buckets, they had the 2gallons for under $3, so figure around $7 per site plus time and labor, the hole saw itself if you dont have one is like $20 and it doesnt even come with a bit to connect to your drill, if you do get one the size to fit a 1/2 inch grommet is 3/4inch hole saw, provided you use GH or raindrip grommetsanyone know where locally i could get buckets of the same size? tried homo depot and lowes but they only have 5g. wehre can i get 2g?the expansion kit is like 80 bucks F that for 12 2 gal pots