bgoldwater
Member
thanks real helpfull. any pics on sexing them
your best bet is to put the exhaust fan at the end of the exhaust so that it pulls the air through the lights instead of pushing.... it will run much more efficiently that way...hey simpson thanks for the info. I don't have any pics yet because I wanted to build the box this weekend. So you think the fan would be better set in the box or outside the box. Can I mount it to a 1/2 inch to 3/4 inch multi density board. If I do I am thinking maybe I should run some support beams across the top part of the frame so that it doesn't sink with the weight. I took it out of the box last night when I got home and it looks easy to hook up. Is it really loud? I was thinking I might hook it up on the floor and see how it runs. Do you think thats a good idea or dangerous. The fan will vent two 400 watt lights. And you think I should put the scrubber at the beginning of the lights with ducting moving from one side to the other and then to fan.
yeah, you can go ahead and start feeding them 1/4 nutes.. get them girls started off well..sampson, preesh the feedback & comments on the autos.
On to phase 2 w/ the photo girlies.
Got all rooters oprah style & into blocks & ready to rock. took the day off. ha.
to get separate res. & drippers goin. They are ready to rock.
All I need is for you to take a peak @ the old recipe for success (i attached the version you sent to me for quick & easy viewing pleasure), & advise which batch o' nutes to mix up. Been hand watering cubes w/ the "Seedling / Transplant" regimen of just Root 66 & Sugar Daddy. Following those directions exactly (2tsps of each per gallon).
But is it time to shift up to a 1/4 strength solution of the grow nutes?
If not now, if you could advise when I would be most appreciative. (Is there a rule of thumb on that, like after the 3rd set o leaves or something?)
A few cubes are still a little too young, so I am hand watering them still, but they should be ready for drippers in 2-3 days.
Also have a timer ordered that wil be here Monday so that I can drip for 10 minute intervals whenev needed. A little advice on how often to plan those 10 minute cycles for next week would be just as lovely.
A gentleman & scholar you are sir.
Thanks for your time homey.
alright.. so it sounds like you are in the clear to start feeding again.. give them a 1/2 strength dose to get them started again and go full strength after that... do you know what the ppms of the run off is??Ok so 3 drinks later (no growbig) the pH has appeared to have gone back up to 6.5 (the meter liked 6.5 but kept flicking between that and 5 sometimes). They haven't had any grow big in 10 days (just finished watering and they haven't been fed the last 3). They seem to like every 3 days (when I went 4 days I noticed the tallest let its leaves hang, and they perked back up after watering).
My question is this: now that the pH appears to be back at 6.5, the next time I water should I feed them, or should I wait one more time? Also I am looking at that foxfarm soil feeding schedule http://www.foxfarmfertilizer.com/soilfeed.pdf Am I really supposed to be combining Tiger Bloom and Big Bloom the whole time during flowering (i know a bit about that no feeding the last 2 weeks or something), and then a couple times with growbig as well? *I started 12/12 yesterday
alright.. first for sound http://www.wormsway.com/detail.aspx?t=prod&sku=DM610&AC=1Okay simpson. We have a new development. I would love to make this box huge and have a few others to boot, but I also have to somewhat please my girlfriend who lives with me. I am already making her mad enough about the box hosting 2 lights and after measuring the fan and looking at the room to see if I can go bigger I am thinking that she won't sign off on any bigger. So what I propose to you is that what if I put the fan on top of the box and I can even probably build a sound box for it to go in (don't know how to do that any suggestions). But and its a big but is my fan, 450cfm, powerful enough to suck through a scrubber two lights and make a huge u turn up to the top of the box? I wish I could just say fuck it and do whatever but I do like to have sex so that would screw me there. So what should I do? I don't think I can push the sides out any farther and I also just realized I will have to go a little farther out than planned anyway so that the ducting can be flexible enough to have both lights at different heights at the same time without disrupting the grow or air flow.
glad you enjoyed...thanks real helpfull. any pics on sexing them
Dude thats a pretty diesel ass fan. I am confident that you will have no problem cooling the x2-400 watts, you just have to vent to somewhere totally outside of the room. I only have a 392, and had to buy a "Speedster" speed control thingie cause the damn thing was pullin so hard @ full strength it actually made the area too cold. Granted it's the dead of winter, & will be way diff. in summer, but still). I have only x1-400 watt, and that sppedster has never been higher than 1/3 strength to keep temps in mid 70's.Okay simpson. We have a new development. I would love to make this box huge and have a few others to boot, but I also have to somewhat please my girlfriend who lives with me. I am already making her mad enough about the box hosting 2 lights and after measuring the fan and looking at the room to see if I can go bigger I am thinking that she won't sign off on any bigger. So what I propose to you is that what if I put the fan on top of the box and I can even probably build a sound box for it to go in (don't know how to do that any suggestions). But and its a big but is my fan, 450cfm, powerful enough to suck through a scrubber two lights and make a huge u turn up to the top of the box? I wish I could just say fuck it and do whatever but I do like to have sex so that would screw me there. So what should I do? I don't think I can push the sides out any farther and I also just realized I will have to go a little farther out than planned anyway so that the ducting can be flexible enough to have both lights at different heights at the same time without disrupting the grow or air flow.
sweet! one major concern down heres another.....from what ive read if my space for height is limited to less than 5 foot should i keep it pruned to about 1-n-a-half to 2 foot until i start to flower? if so do u prune from the top always or should u get branches too? thanks for the info big helpyour best bet is to put the exhaust fan at the end of the exhaust so that it pulls the air through the lights instead of pushing.... it will run much more efficiently that way...
the carbon filter would be fine at the beginning of the lights... really it doesnt matter where in the line you put it....
you have the right idea on running the duct... again main thing is keeping it as straight as possible..
yeah, you can go ahead and start feeding them 1/4 nutes.. get them girls started off well..
as far as drip cycle.. try 10 on, 30 off to start with... we'll watch for sag.. it will tell us how they are doing... if the medium is moist and the plant is drooping we'll know it needs cut back some.. if the lower part of the plants start to droop some while the tops stay out we'll know they need fed a bit more.. if they stay nice and faned out we'll know they are golden..
alright.. so it sounds like you are in the clear to start feeding again.. give them a 1/2 strength dose to get them started again and go full strength after that... do you know what the ppms of the run off is??
keep an eye on the ph and the run off ppms to know how they are eating... as long as things are staying balanced things should be good.. feeding may have to be adjusted as needed.. but since things are back in line you should be good...
as far as feeding and flushing... in my experiences i have continously cut the amount of time i flush down every time i harvest... i keep feeding stronger and stronger solutions, further and further into harvest.. to the point i only flush for 48 hours.. now this varries slightly since im in hydro.. but the point im getting to is flushing is not a needed part of growing... its hippie logic... i wont bore with all the reasons why... but i will say that the last couple weeks can offer the most swelling.. and cutting nutes during that time can reduce potential harvest.. up to 15% i would guess... the best thing i can say is try an experiment with a couple plants.. cutting feeding to 1 plant 2 weeks before harvest... cut feeding to another one at 1 week.. and dont stop feeding one at all.. see which yields the most (since they arent clones they will varry some either way.. but you should be able to get a general idea) and if you can honestly tell a difference between them... i will bet you wont...
alright.. first for sound http://www.wormsway.com/detail.aspx?t=prod&sku=DM610&AC=1
as for your second question, yes that would work.. the fan can easily pull that and still make the 90 degree turn upwards... not a full u turn (as in 180 degrees).. but 90 to 120 for sure..
glad you enjoyed...
i dont have any pics saved at all... but its pretty easily distiguishable...
males will explode with what look like grape clusters all over it... you wont see any pistils.. just grape clusters...
females will show pistils... the pistils are what we usually refer to as hairs... so if you see white hairs start popping up all over you know its a female...
you will have time enough to successfully sex your males and females before pollination can occur... so if you are growing mixed seeds dont worry about it.. you'll know way before it can happen.. just have to keep an eye on things..
did that start appearing after the transplant or prior too?? it looks like a def setting in actually... you said the roots were going nuts right?? so that means they are ready to eat a lot.. i am almost sure it is just a sign we need to up the ppms of the feed solution.. at least in the boost section of things.. cal-mag def is what you are seeing..Hey doc, if you could thru an eye on these pics, that's be sweet.
Got some yellow spots & some weirdness on bout 3 o'' the youngsters.
Is it nute burn?
Again, just been feedin the recipe for Transplanting on "Recipe for Success", so not usin any crazy freaky experimental shit.
Perhaps feeding too much?
Probably dropping a max. of x3 teaspoons of nute solution 2-3 times a day. And they look plenty moist.
I'm goin off the old pointer for takin care of my lawn. THe simple principle that roots need to dry out at some point to create vigorous root development, correct? My only experience thus far is lawn maintenance & plantin grass seed. Ya soak & let dry for twice as long. I have to imagine that basic principle applies correct? A plant is a fukn plant I suppose.
Ramblin, sorry bro, lemme know what ya think & thanks again for sharing the wisdom!
it depends on what kind of pruning you do... if you are topping the plant then you just do the main stem at the top... if you are doing something like super cropping or LST you do/can do the entire plant.... super cropping is the best pruning technique IMHO... mainly because it makes the plant push those lower branches upwards.. which means more bud sites to flower, and less wasted plant... but its up to the grower what they want to do...sweet! one major concern down heres another.....from what ive read if my space for height is limited to less than 5 foot should i keep it pruned to about 1-n-a-half to 2 foot until i start to flower? if so do u prune from the top always or should u get branches too? thanks for the info big help
Yeah show she took my balls tonight when she seen the big ass fan. She was soooo pissed. I was like you said you was cool and she was like this big ass fan means your box is going to be so huge. I told her it was going to be big and she said okay but now she's trying to play dumb like she didn't know or say that. She said that if we get a house then I can go as big as I want so now Im about to do whatever it takes to get one because I am going to turn a whole freaking room into a grow paradise. But anyways she caved and then I caved like a pussy after a very long and heated fight and I told her I would only use one light and make the room half the size but really I am going to make it a little bigger than that anyways, fnck it. So I am thinking that if its only venting one light then maybe it can make a 180 turn to the top of the box. I don't know. If anyone could offer some advice. I think I will make it big enough to hold 4 or 5 nine inch square pots that are 3 gallons apiece lenght wise and two depth wise making a total of 8 to 10 pots. That's still probably more than she's cool with but I think we should meet halfway and she will be super happy when she sees the harvests of sticky sweet buds so maybe she will leave me alone.
alright... so first as far as the fan goes..... it is in your best interest and the best interest of the fan to try to avoid a 180 degree bend... unless the fan is set up to pull instead of push the air.. then its less of an issue.. but the efficiency at which your fan does its work is going to be cut drastically.. so you may end up having to run it full power with the same results as someone running one at half power or so... i cant be 100% sure tho.. i just know it will run less efficiently...Oh she keeps saying that the police are going to be tipped off by the power company and I keep telling her thats not true but if someone can offer me some truth about this it would help. Maybe I can even show her some evidence to prove my case.
I could post in great detail as far as specific grow specs, but it would be long posts, and I don't know if that would be appropriate , Would that be a thread hijack?thank you very mind for the kind words.. i really do enjoy helping out and hearing success stories.. it makes me happy to know i am helping someone somewhere get the medicine they need and should be able to get!
so now back to your set up...
im sure within the confusion of everything i wrote it got way more complicated sounding than it should...
it would only require 3 pumps.. nothing big by any means... just 3.. and only 2 of which are on timers...
1 pump would be strictly for the top flood tray/res... if the top levels' res was on the floor, it would still be somewhat a gravity feed... the pump would stand only to push the water to the top tray.. it would run down the tray and back into the res via a return line gravity style..
the other 2 pumps would be for the bottom levels' res... only 1 of which is on a timer... the controller bucket (the stepping stone as i refered to it as) kicks on by itself when ever the water level rises enough to turn the float valves on... so if there is a pump in the res that is pushing water through the trays, which gets drained into the bucket, the pump in the bucket would automatically turn on (as needed) and empty back in the res... i really think this would be ideal for you.. mainly its because it would allow you to have a large res for the bottom and top levels... (no need to have a low profile res that doesnt hold enough water... especially when you only need to raise the trays maybe 6" off the ground)...
there are timers that you can get that can run 2 x 120v things from it... so you could potentially get 1 timer for the 2 pumps you need to run... thus cutting down on timers you have to worry about.. and again that 3rd pump will turn on and off automatically as needed.. so you dont have to worry about that...
as far as actual water leakings or home floodings you should have NOTHING to worry about.. the controller bucket is water tight.. its actually a modified version of the ebb and flood controller bucket i have made by the same company.. only difference is that my timer buckets have a timer that runs the ebb and flood cycles.. still has the same float switches and everything.. so i can promise you that its more than reliable...
even if you dont go that way, there are plenty of ways to ensure your system is water tight...
if you are open to some other ideas i have a few more also.. ones that would work and save you from using any timers at all.. just would need a pump per res... let me know if you are interested and ill spit it out..
everything else is sounding solid.. its nice that you have such a laid back aggressive approach.. ready to get things going but not over eager is a good thing.. too much excitement can sometimes lead to failure...
hopefully this thread continues to grow and i can continue to help people.. the hardest part of helping isnt the questions i have to answer.. its getting people to actually read this thread initial and start asking questions.. i have noticed tho that the people who asks questions in here are really concerned with growing good green... not just the "i have a closet in my bedroom at my parents house" type growers.... and for that i thank you all.. it makes it a lot more fun and interesting for me!
the duct muffler will make it damn near silent if you can afford one... and a 90 turn is MUCH better than a 180... if you can do it go for it!!hey thanks simpson. yeah I have been trying to explain that but it helps to hear it from fellow growers and the thing you said about the power consumption of household appliances will help out a lot. I am going to try just doing a 90 turn so that I can run a fan speed controller and make it less noisy as well as less power.
alright... topping can be done after you see about 4 or 5 node sets and pretty much can be done after everytime the plant heals itself.. maybe 5 or 6 days in between... the problem is that topping causes a lot of stress... and the results are limited...giant help simpsonsamson....how tall should i let it get b4 i start topin it? i have not yet planted i feel i need all the info i can get b4 i try. how many times and how far back can u trim and how many days b-tween trimmings should i wait on a 24/0 light schedule?
it will likely take up to a week to clear up... so dont get too impatient.. when they are young and have defs it takes a little longer for them to recover.. just be patient with them...Hey bro, I believe your prognosis to be spot on.
Those spots did indeed develop AFTER the transplant to the cubes.
If you believe it is nute def. I'm sure that is again indeed the case.
I've just been hittin 'em with the "Transplanting" regimine.
Just hittin them this morning w/ 1/4 strength VEG nutes, which got some nice micro, grow & calcium in there.
I bet they will clear up in a day or two.
From there, once I decide on best nute mix, I'll start the drippers. on the cycles you suggested.
Bet you would be way over it, but I actually don't mind the hand watering. Actually kinda dig it. Prob. get old in a few more days though.
Hypothetically, I suppose it has to be possible to grow hydro w/ just hand watering. I suppose you have to have some sort of return for drainage.
Yeah anyway, thanks bro, spot on info, & I'm on it!
post whatever it is you want to post... if it helps get to the answers then its fine! plus i can give a little better answer based on how you have things set up...I could post in great detail as far as specific grow specs, but it would be long posts, and I don't know if that would be appropriate , Would that be a thread hijack?
Not ready to start any sort of grow journal yet, would that be OK ?
I hear ya, yeah watering maturing grils by hand would suck. I should've clarified that I mean't hand watering merely as an intermediary step for the next few weeks untl I can clear out autos & transfer them into the tent w/ the v-drip deal.here is the problem with hand watering and hydro....... in hydro applications the medium wont hold water as long as soil will... rockwool, jiffy, an coco will hold liquid the longest.. but the plants rate of growth wont allow them to hold enough water for long enough... basically a hydro grown plant consumes 3 or 4 times the water a soil plant does... so lets say you wanted to hand water... you would end up saturating the entire medium almost daily once the plants take off.. if not more... initially its not too bad.. when they are small it takes little water.. but once they get larger and can drink a gallon of water a day by themselves it can get REAL old REAL fast...
hey brotha.. how ya been?? dont spend much time on here anymore except in a few threads.. thanks for the kind words... always nice to feel the efforts are worth it![youtube]vj6aIK_WXhU[/youtube]
Bitch! You know what I want!
Hahahahaha!
I wanna talk to Samson!
Fly me to the moon like that bitch Alice Kramden!
'Cause it's hard being black and gifted!
Sometimes I wanna throw it all down and get lifted!
thanks for helpin the beginners SS. your the man and you know what your talking about
alright... so as an advice giver i would say weekly res changes are needed... but..... you can really go up to 2 weeks without a full res change...I hear ya, yeah watering maturing grils by hand would suck. I should've clarified that I mean't hand watering merely as an intermediary step for the next few weeks untl I can clear out autos & transfer them into the tent w/ the v-drip deal.
Still sounds like a pain in the dick & already have the gear to drip automatically. Just usin some old hindsight to see if I could have spared myself the extra reservior, pump, etc.
I'm sure it's the case for all growers, but tryin to save every possible square inch is extremely important to me.
I totally gonna look like some type of circus act before its all done. Im already havin to pull off some serious acrobatics up in that piece sometimes just to reach shit.
It'll work though, thanks for the insight brotha & have a good weekend!
TIme to do that weekly res. changin.
BTW, I empty that bitch & take out from under v-drip to so i can wipe out all the shit from the edges. It really is remarkable how much & how quickly shit gets cake on the sides.
If I wanted to be lazier, how long could I let the res. go w/ out rinsing & scrubbin out every week.
I imagine most folks prob. run them bitches ragged all the way from start to finish & just add nutes.
I usually use a syphon to get most h2o out, then pour remaining last say 1/2" of water straight down drain.
What if I syphoned out all but that 1/2" of h20 @ bottom & just filled up from there w/ fresh water & nutes. Really would make my life a lot easier, lemme know!
peace
confidence is key.. sounds like you should go for it! and if you ever have any other questions you can always come back and post them.. im more than happy to help!those links were sweet very helpful. i think i am almost confident enough to start this shit up thanks!!!
It's all just been the dried up lookin salts I suppose (looks remnance of a massive money shot, know what I mean?) Sorry to offend anyone's delicate sensibilities, but pretty show there's no offendin you sampson.alright... so as an advice giver i would say weekly res changes are needed... but..... you can really go up to 2 weeks without a full res change...
now.... here are things to consider.. first is nute usage.. since you dont know how much of what has been ate and is left over, adding new nutes can be somewhat a shot in the dark.. if you top of with new nutes its best to just use 1/4 strength boost and whatever cycle your in... so either boost and gro.. or boost and flower... equal parts....
the main thing tho, is the build up.. first, can i ask if its a slimey build up or just dried up salts?? the slime (if thats what it is) is actually caused be ph down... ill explain more if you want.. nothing bad... if its dried on salts, you have to remember that one, if they break off into the water it will affect the ec/ppm and ph of the water... and those little flakes can get drawn into your pump then clog up your drippers.. its really more important with a v-drip system to keep thing clean so the drippers stay open...
lol thanks brou da shit sampson
alright... so first the residue you are seeing is just salts like you said.. the burgundy color is more than likey the color combonation of the nutes all together... the slime i was talking about isnt mold or mildew or anything like that.. its actually caused from ph down and phosphorus... the ph down does something chemically to the phosphorus (super saturates the solution or something) and causes it... so if you ever feel something slimey but dont see algae or anything thats what it is...It's all just been the dried up lookin salts I suppose (looks remnance of a massive money shot, know what I mean?) Sorry to offend anyone's delicate sensibilities, but pretty show there's no offendin you sampson.
So yeah, no algae or green slimey lookin shit. Just the dried up kinda splatter shape round sides & bottom of res. When I remove res. & wash & scrub out, looks almost like some slightly burgundy residue is on towels (similar to hydroton residue when rinsing that shiz). I'm sure those dirty ass balls are prob. still releasin some residue. But dude, I rinsed those bitches for like 2 days, til ALL run off from em was clear water. THen I even soaked balls in root 66, sugar daddy & thrive alive in PH'd water for good measure (even though I'm virtually positive that soakin the hydroton didn't do shit, as I am quite sure that they don't "hold" anything @ all). But was gonna use coco & then changed mind @ the last minute & I'm a bit of a perfectionist I suppose).
PLease do explain whatever else it was regarding the residue explanation you were breaking off. If you type it bro, I will read, & more than likely print to my hard drive for future ref. so it WILL NOT go to waste. All part of my education!!
So thats the residue deal.
Few new queries, for tonight.
1st off. A true SOG, would that be takin seedling (bout the size of mine now, see photo from last night), takin seedling bout that age & switchin right to 12/12?
This is just for future knowledge. Also, whatever age you advise is best for SOG, what would the nute regiment be?
If they are on reduced (1/4 strength) grow nutes, once you switch em to 12/12 do you do a "ween" type thing with them over to 1/4 strength bloom nutes & then increase bloom regiment's strength as the girls enlarge?
Finally, for tonight anyway. my watergarden thats gonna keep the mommie. BTW, think I am gonna keep that wembley shit for x1 of 'em, that shit looks sexy.
Anyway, how much older do my seedlings need to be to go into waterfarm?
And pursuant to our convo. earlier bout waterin & letting shiz dry out (and in essence the fact that hydro is way diff. than conventional wisdom w/ soil). My waterfarm has an air pump that also pumps nute solution up to drip ring for continous drip?? is that kosher?
I would think that those little chickies do not need a constant drip. I guess the h2o farm is a combo of DWC & top feed.
So if I reduce the pump (on a timer) to come on for say 20 mins every hour. The drip ring will not keep drippin on the youngsters, but the soultion will also not continue to bubble vigorously unless pump is still on.
And I think I should just delete everything I just typed as I think I may have figured out while tryin to explain it.
I'll reduce the waterfarm to say 10-15 mins an hour, and then the water aerated in the bottom DWC won't matter if they bubblin or not. Cause once the moms are big enough to need the constant bubblin DWC action, the moms will be big enough to handle the constant drip ring.
Well hell, thanks for lettin me vett that out.
Thanks it all, and I look forward to moe wisdom.