FrigiDare 2 Indica's Infrared Spectrum Trial
- Thread starter Danielsgb
- Start date
kingofqueen
Well-Known Member
Looking good brother ! +all the rep I can for the Green Dragon recipe ! Tinctures work better for me when I,m having a bad attack (Chrones Disease). I think a strain geared toward spascity would work good for me also .My worst symptom is cramps that cause alot of pain.
Illumination
New Member
gumball
Well-Known Member
Illumination
New Member
Lucky enough to have seen them for "Animals" " The Wall" and "The Delicate Sound of Thunder"....Am so glad as definitely some of the best shows I have been to...not to mention the millions of time they just scrambled my brain...lol...good times...
Namaste'
Danielsgb
Well-Known Member
I wish I could have seen them too. I saw Phish do the whole album in Salt Lake City. As close as I could get to seeing that album.
Plants could be looking better, but me leaving for 10 days didn't help. At 50 days I'll start the 2.0 UVB for 15 after the 'sunset'. I rotated them, as the front right got some burn from the CMH. I better give her a Pro-teKt next.
I can do better next time.
Daniels
Danielsgb
Well-Known Member
Here's a full update.
I'm having some temp issues for the FrigiDare & Cleo. Too cold
so I turned the intake fan off, then the main fan too. Low was 45 to start the am and 65 to end. She's doing OK, but nutes got off a bit, and watering too. I'll start the UVB bulb soon for 15 after lights go off. This chamber may have to be on hold after this harvest till March for it's next test.
Nikki has recovered all I can expect. Not too sure about this Flairform nute mixture. The Diesel X behind it had spider-mites on inspection so both got treated with Floramide. Seems to be doing fine, I guess. Kinda disappointed cause my others have been better.
I will top for 2 Main Colas and veg for shorter plants for a while to see if that works better for me. Especially for this chamber as the burn while I was gone pisses me off a bit.
On to the pics
Daniels
I'm having some temp issues for the FrigiDare & Cleo. Too cold
so I turned the intake fan off, then the main fan too. Low was 45 to start the am and 65 to end. She's doing OK, but nutes got off a bit, and watering too. I'll start the UVB bulb soon for 15 after lights go off. This chamber may have to be on hold after this harvest till March for it's next test.Nikki has recovered all I can expect. Not too sure about this Flairform nute mixture. The Diesel X behind it had spider-mites on inspection so both got treated with Floramide. Seems to be doing fine, I guess. Kinda disappointed cause my others have been better.
I will top for 2 Main Colas and veg for shorter plants for a while to see if that works better for me. Especially for this chamber as the burn while I was gone pisses me off a bit.
On to the pics
Daniels
Attachments
gumball
Well-Known Member
a make shift heater I made is a 60 watt light bulb wrapped in HVAC foil tape, and screw it into a photocell adapter. put it near the intake, and when the lights go out the photocell will turn the bulb on and this will keep the temps good. smaller bulbs for will let it get colder. i did this in a box i did early on in my bonus room, where it was cold in the winter, colder than my garage.
they look great though. I see what you mean about shorter plants, they fill the frigs up real fast!!
they look great though. I see what you mean about shorter plants, they fill the frigs up real fast!!
kingofqueen
Well-Known Member
I run into the same problem with temps also Daniels . I,m insulated well enough to hold some heat but the damn cold ass intake is what was getting me . So I came up with a way to "pre heat " the intake air . To do this I'm pulling my intake air through a veg box that runs 24/0 the heat from those lamps heats the air b4 entering the flower box and it doesnt go to waste since the lights are growing veg plants. I'm maintaining 55-58 lights off and 66-68 lights on . Lamps are 2 27w cfls and 1 68w cfl . Then if it gets really cold I replace the 68watter with a 250w heat lamp .Seems like you could build a metal chamber in line on the duct and mount a light in it would work too . Mine space is in a garage so its cold .I,m at 5,800ft here .
Illumination
New Member
hear you on that ...I am above 6500 and normal humidity is in the teens!!
ElectricPineapple
Well-Known Member
sheeit im at 8000, and im afraid to turn my light off, because i know its gonna get cold. but my garage is heated somewhat, and it shouldnt get below 60 at night with lights off, but its still warm here.
DJ GreenThumb
Active Member
I finally figured out how to subscribe to threads.....I was like DUH!!!......anyway....SUB'd!
Danielsgb
Well-Known Member
So today I changed some exhaust timers. I had the lights fans together so I put each on it's own. I have them 45/15 varied so neither is off at the same time. I have a later delay to start the am. I have another timer to set for a change again if this isn't enough. I'll go 15/15 for the HPS first. Temp was up to 65 for a while. If I don't see low 70's I might do it.
2.0 UVB bulb is in with the fan on the same timer. I might as well get this UVB test going. The tops that got burnt will be OK, but I'll monitor closely. 15 min after HID's go off.
Here's some pics. Some lower buds are getting purple. One main top is kinda too. Something is kinda off. I guess a lock out. Claw shape is high salinity right? I was thinking of leeching it. My water in the garage is mid 40's. So if I do, should I use inside amb. water? Would it be a good idea to use 6.5 or lower pH water?
Daniels
2.0 UVB bulb is in with the fan on the same timer. I might as well get this UVB test going. The tops that got burnt will be OK, but I'll monitor closely. 15 min after HID's go off.
Here's some pics. Some lower buds are getting purple. One main top is kinda too. Something is kinda off. I guess a lock out. Claw shape is high salinity right? I was thinking of leeching it. My water in the garage is mid 40's. So if I do, should I use inside amb. water? Would it be a good idea to use 6.5 or lower pH water?
Daniels
