Grow tent, 3x3 ventilation temperature issue

U

User1534

Active Member
I’m fairly new to growing, and I need some help from other fellow growers as I’m in a situation I cannot figure out myself. I have set up almost everything for my hydroponic setup; 600w led light, t6 cloudline, a couple fans as well as a filter. BF778402-9206-4E73-AD64-F1635C9E325A.jpegUnfortunately no matter how excited I am to grow my first grow, the tent is not cooperating as it is set at a solid 80 degrees inside the tent.
I know these are not the temperatures I am looking for so I need to figure out how to cool it down. It goes from 81 degrees to 83 degrees regularly with the light on. I am venting my exhaust, through a carbon filter, outside my room. The room is a solid 76.5.
CEA96672-6F0B-478F-A379-50CEDE412753.jpeg
I am using passive intake, as I have two intake holes at the bottom completely open for the air exchange, and I have my tent sucking in air at a setting of 5, I figure it’s 177 or so cfm (Calculated as the t6 has 10 settings, 354 cfm so setting 5 would be 50% of 354
AC42FC6B-A443-48B1-BBFE-2109FC6B2030.jpeg
7AA11008-F0F0-4822-B8F0-250DCDD054EA.jpeg
I am stuck on this problem because I have yet to find a cost effective way so I can go ahead and plant my seeds. any and ALL help is appreciated, urgent!!
 

Attachments

  • C4C98AE4-C26A-4E4B-A5AD-A772B1A108A7.jpeg
    C4C98AE4-C26A-4E4B-A5AD-A772B1A108A7.jpeg
    1.2 MB · Views: 17
  • E058CC7E-D6B0-474D-B524-A404464ABFE4.jpeg
    E058CC7E-D6B0-474D-B524-A404464ABFE4.jpeg
    1.3 MB · Views: 16
  • 568D27B2-EB4E-4A0D-B0F7-7CC0F5C21FA1.jpeg
    568D27B2-EB4E-4A0D-B0F7-7CC0F5C21FA1.jpeg
    767.2 KB · Views: 15
You see that bend in the ducting attached from the fan to the carbon filter? Shorten it so it's connected straight. You don't want any bends in that or it'll reduce the amount of exchange in the tent.
 
I think you’d be better off with a intake fan, which will help keep the temps around 80ish. When you flower, you’re gonna have to close the vents because of light leaks, which will require a intake fan later on. Either way 83 is not bad, just stay below 85
 
Agree w/ Fuq. Also, led runs need to be higher ambient temps- 80-85. Not sure if that applies to the blue veg light as well though
 
FuqStiK said:
You see that bend in the ducting attached from the fan to the carbon filter? Shorten it so it's connected straight. You don't want any bends in that or it'll reduce the amount of exchange in the tent.
Click to expand...
I fixed the ducting, but is that really going to make that much of a temperature difference? Especially when I can just ramp up the speed on the exhaust if the line is too long.
Redskare87 said:
I think you’d be better off with a intake fan, which will help keep the temps around 80ish. When you flower, you’re gonna have to close the vents because of light leaks, which will require a intake fan later on. Either way 83 is not bad, just stay below 85
Click to expand...
so get an intake fan when having to flower, but the temps I have are fine right now? I’m going to place my seeds and germinate them inside of a rapid rooter, I thought the seeds were supposed to be around 70-75 temp
 
Hps ect. Not led. Someone feel free to correct me but leaf surface temps react differently for led compared to hps/ non led
 
SBBCal said:
Hps ect. Not led. Someone feel free to correct me but leaf surface temps react differently for led compared to hps/ non led
Click to expand...
Hmm.. so your saying to replace the entirety of the light and switch to hps? Or just during another stage.. I was going to switch to HPS when it hit towards the flowering stage
 
SBBCal said:
No im saying your temps are fine
Click to expand...
Even during the ‘young’ stage? I posted above I was going to put them in rapid rooters and just germinate them that way. I thought my temps during young stage were around 75, correct me if I’m wrong of course
 
Leaf surface temps react/run differently if your using led compared to HPS . While using led lights temps need to be higher than 78-79 like if your running hps.cfl / non-leds. Again im not 100% on that blue veg light being applied as a normal led
 
User1534 said:
Even during the ‘young’ stage? I posted above I was going to put them in rapid rooters and just germinate them that way. I thought my temps during young stage were around 75, correct me if I’m wrong of course
Click to expand...
I keep my temps at 82, and run led. Much faster growing that way
 
All the time except from when they are seedlings. Seedlings get the windowsill, seeds get started on top of the cablebox.
 
Boatguy said:
All the time except from when they are seedlings. Seedlings get the windowsill, seeds get started on top of the cablebox.
Click to expand...
The problem with transferring, with my specific hydroponic set, is that I am starting my seeds off right in the rapid rooter. Am I supposed to start them off someplace else and then transfer?
 
You must log in or register to reply here.
Back
Top