Harvest a Pound Every Three Weeks!

dagobaker

Well-Known Member
ok my initial weight of the grow is approx (i added 1 oz from the 2 small plants i took off a week earlier)
430 grams............. its very tough to weigh that amount on a small scale so ill update if it i was wrong
thats 430 grams or about 15.25 oz .......
i need to step back a minute and really figure out if thats correct
stay tuned.......if its wrong when i re weigh it in smaller amounts ill post the correction
that is half (1/2) of the 600 (300) hps unit running aero.....co2.......botanicare nutes....humidity 55%.......temps from 75 during day and 83-85 during nite time lights on.........
ok 300 watts and 430 grams gives me over 1.4 grams per watt running the romulus at about 10 weeks of 12/12........


it seems crazy i went from .3 grams per watt with coco to 1.4 grams per watt running aero and co2 and great nutes
 

dagobaker

Well-Known Member
BTW i run 2 stink bud systems under each 600 hps..........have 3 - 600 hps and 6 stink bud systems and one 400 running hempy (no room to run the stink system)
 

andyman

Well-Known Member
sucks you got caught dude, I tell them to bring it, when they try to bluff there way sayin there gona get a sw. bring the dogs 2 is also what I them. Then I say somethin smart like " Your gona pay for the shit your dumb dogs tear up and find nothing after there done" They usualy dont call my bluff and let me be with a trafic ticket or warning. Its best to know your rights. " tell them you dont condone any searches of your person or property"
 
So I've read through page 328 and obviously I'm only half way but feel like I have a very good handle on the system and virtually all questions have been answered. I already built the aerocloner and have supplies for my veg unit, both under t5's. I'm trying to get going on my flower area, but I have a question about what lights to buy. I have a pretty small space 2.5'x5x7high. I'm planning on building three modified 6 hole mini flower systems, not only for size restrictions but because with my two patients MMj's and my own 18 plants is the limit. I'd like to buy 2 600's because hopefully I'll be moving to a bigger house down the road where I can have a bigger grow room and it will be easy to expand on the 600's. But is two 600's too much for such a small space? Can you have too much light? Or will keeping the temps down just be a motherfucker? I plan on having a sealed room, co2, and air cooled sealed hoods. Any advice would be greatly appreciated. Thanks for all the knowledge I have already gained from this amazing thread Stink and all the others! Now back to page 328, I started when the thread was at 600, lots of catching up to do...
 

imburne

Well-Known Member
We dont even get close to what the sun produces so I dont think its a question of too much light, but too much heat may be the problem. Can you use a light mover instead? IMO thats the best for small spaces. Also consider res temps if you are located in a hot place.. Thats the only problem I have now with this system. Other than that its perfect.
 

want2help

Member
Just thought id share this info, I like your design but in my experience so far I found that if you let the water pool at all on the lid instead of dropping str8 down into the res, be prepared cause in a month or so your lids gonna get a bunch of brown crusty shit, all over it an its a bitch to keep clean.. otherwise its a nice setup clean! I dont claim to know it all I just thought id share that with ya so you maybe could learn off my mistake. I was having an issue with leaving that big ass hole in the lid an not wanting light to get in, so i just took some black privacy screen an cut a couple squares threw em on an vuwalla no light entry lol however thats wen i got the pooling cause the screens holes were to small an the crap showed up. hope i helped.:bigjoint: Oh yea an Subscribed
 

want2help

Member
Oh and Im using stinks recipe for the nutes, I recently lowered ppm in the res, but the curl is still there, no burned tips but curl still there, any idea on how long or even if they will recover from the curl, oh an the satrain is Sweet island skunk. thanx
 

ifixbax

Active Member
Not sure of nomenclature, but... The Stinkbud system consists of 3 flowering racks (each containing two posts, each post containing from 3 to 7 plants). One rack per 3 week period, rotating. You say that you have a 600 watt light per 2 "Stinkbud systems". I take it you mean per 2 racks. So my questions is this - How do you orient the 600 watt light to cover 2 racks and get 1.4 grams per watt???

I keep wondering if running a single 600 watt light per rack is enough, and if a 1,000 watt light is a necessity for better penetration. Do you use a light mover? TIA
 

andyman

Well-Known Member
hey guys/gals I tried using the search button (what a joke that is ) to find a good way to clean out my space case grinder and keif box/rolling tray. Its so clogged from last harvest that nothin seems to be droppin in the 3rd level were the keif goes. If I hold the screen up to light it seems to be kinda clogged. Im thinking I could take everclear or some high grain alcohol and clean it up with a toothbrush or somethin. But I dont want to loose any of the pluggage. I was wondering if I did that and let the stuff dry in a bowl and evaporate if that would leave me with somethin smokeable.
thanks ya all
 

SoCoMMJ

Well-Known Member
Oh and Im using stinks recipe for the nutes, I recently lowered ppm in the res, but the curl is still there, no burned tips but curl still there, any idea on how long or even if they will recover from the curl, oh an the satrain is Sweet island skunk. thanx
Once you claw the leaves they will stay clawed.

Watch the new growth that comes out as an indicator of your nutrient strength.
 

robotninja

Well-Known Member
Hey Stinkbud, you say 24-48 hours for the flush with Sweet? Is 24 hours enough? And do you run the pump at 1/5 intervals or 24/7?

Just finished my Clearex flush and gettin ready to starve em for 24 hours. *Fingers Crossed*

BTW, took a sample bud and steam dryed it, Amazing! I can't wait to see how she taste's with the Sweet added and a proper drying/curing process. This is gonna be some chronic! :bigjoint:

It's a proud moment when you can smoke your very own Bud, you've made me a happy camper Stink!
 

Attachments

LionsRoor

Well-Known Member
Hey Stinkbud, you say 24-48 hours for the flush with Sweet? Is 24 hours enough? And do you run the pump at 1/5 intervals or 24/7?

Just finished my Clearex flush and gettin ready to starve em for 24 hours. *Fingers Crossed*

BTW, took a sample bud and steam dryed it, Amazing! I can't wait to see how she taste's with the Sweet added and a proper drying/curing process. This is gonna be some chronic! :bigjoint:

It's a proud moment when you can smoke your very own Bud, you've made me a happy camper Stink!
Yeah Ninja! Nothing beats homegrown medicine - especially when its Stinky! Good job.

Is that second shot from one of those 420 Microscopes that hook up to your PC via USB?
 

robotninja

Well-Known Member
Yeah Ninja! Nothing beats homegrown medicine - especially when its Stinky! Good job.

Is that second shot from one of those 420 Microscopes that hook up to your PC via USB?
Naw, just a cheapo 12$ 60x-100x Microscope from Radio Shack with built in light. I kinda put the camera lens on top of the eye piece, ghetto solution ;-)
 

doktorgreenthumb420

Well-Known Member
just want to give another shout out for this system ......anyone that is thinking bout building one ....do it they will save you money starting immediately ...cause they just produce so nicely and ......well i have changed my whole method to this ...and my whole life is medical mj ........it just works very easy and i am just perfecting the cloning method other than that this system is seriously.....like secret squirrel shit


and think about never having to get rid of old coir or hydroton ...it doesnts last forever .....u just got plant material ....roots to dispose of and .....no more transplanting ...it makes a big diff for me that is for sure

just wanted to say how good it really is guys
 

doktorgreenthumb420

Well-Known Member
i actually used a ranch fence post it is like 5x5 inches ...it is only one at store that had proper caps ....and i had to cut it in half cuz it had slots for railing

so basically i made one using a shorter version taht was 43 inches long

i still slotted it for seven on each run ...but i built a new one recently (after seeing explosive growth) that has only 5 on each run

either way you are good to go ...

his is suppost to be 48 inches long tho
 
Top