Hash and Oil Picture Thread
- Thread starter Sirdabsalot462
- Start date
Sirdabsalot462
Well-Known Member
lol... Love ya Qk but I gotta....
Said the gentleman with 4k+ posts
I kid I kid...haha
R&RHashman
Well-Known Member
Cant we all just get along??
lol
lol
Bublonichronic
Well-Known Member
Yea, same team guys
R&RHashman
Well-Known Member
ok all in good fun I get it.
Sirdabsalot462
Well-Known Member
Wait?..whadidimiss?
Where did the conversation take the path of losing terpenes?
I thought we were getting along?
Lol...sorry, I missed it...
Somebody enlighten me?
Where did the conversation take the path of losing terpenes?
I thought we were getting along?
Lol...sorry, I missed it...
Somebody enlighten me?
qwizoking
Well-Known Member
yes we have major losses here..
the other day I left a brown paper bag in my car, worked pretty nicely on a hot Tx day
and here...
Texas, skip the dehu. You've got plenty of sun and dry weather, put that stuff in bags outside somewhere during a hot day. It'll dry out.
the other day I left a brown paper bag in my car, worked pretty nicely on a hot Tx day
and here...
Texas, skip the dehu. You've got plenty of sun and dry weather, put that stuff in bags outside somewhere during a hot day. It'll dry out.
qwizoking
Well-Known Member
is there more than one way to this stuff, "to skin a cat"
sure, but only one is best. always and for any topic
vapor pressures are not linear. this is a key aspect in hash making wether solvent sieved etc
why does everyone get so worked up over feelings, I speak facts not opinions most of the time. Im not going to sugar coat something, if you post something incorrect, I may correct you.. if you suggest methods that result in a poor product. like any other section of this forum, I will suggest otherwise. don't get upset or take it personally. why can a forum not be a more scholarly source of information.
sure, but only one is best. always and for any topic
vapor pressures are not linear. this is a key aspect in hash making wether solvent sieved etc
why does everyone get so worked up over feelings, I speak facts not opinions most of the time. Im not going to sugar coat something, if you post something incorrect, I may correct you.. if you suggest methods that result in a poor product. like any other section of this forum, I will suggest otherwise. don't get upset or take it personally. why can a forum not be a more scholarly source of information.
Sirdabsalot462
Well-Known Member
Lol... Thank you 
” Shrug?”
” Shrug?”
lio lacidem
Well-Known Member
Seems like lately there have been more dick size arguments then info. People posting in threads about solvents jumping in with solventlesss talk and vice versa. Lets get back to the poibt of making/ helping others make top notch extracts. Just my opinion but makes it easier for newbs to find the quality info when its not hidden in a bunch of other nonsense. im sure we all want riu to stay the best info site out there and not just afternoon lols! Enough of my rant carry on
Sirdabsalot462
Well-Known Member
Whoops....double post...
Amen lio!
I post this same thing all the time...
All the concentrates are dank as fuck in the RIU section...
When I started this thread.....
my first post did have a rule...
No bashing.
Please refer to the very first post on this thread...lol
I saw the same bs on TC hence never posting there.
Lets get her back on track with fire pics of hash, oil, sift .....whatevas!!
Vac purged qwiso from the pre-blasted material of the cheese run.
I only soaked about 8 grams of the pre-blasted material, one wash for 40 seconds including pour time.
Evap very low heat, into the chamber as a ” wet oil” puddles essentially...
Woke up to this in the chamber
This was done for experimental purposes...
Melted down the qwiso...
Got a taffy consistency now, probably partially decarbed
That damn cheese is cray full of oil...
Highly recommended strain for extracting.
Edit: meltdown performed at 170° for 10 minutes.. 5 minutes on one side, remove, let cool and flipped the patty over..back in for 5 more minutes.
Amen lio!
I post this same thing all the time...
All the concentrates are dank as fuck in the RIU section...
When I started this thread.....
my first post did have a rule...
No bashing.
Please refer to the very first post on this thread...lol
I saw the same bs on TC hence never posting there.
Lets get her back on track with fire pics of hash, oil, sift .....whatevas!!
Vac purged qwiso from the pre-blasted material of the cheese run.
I only soaked about 8 grams of the pre-blasted material, one wash for 40 seconds including pour time.
Evap very low heat, into the chamber as a ” wet oil” puddles essentially...
Woke up to this in the chamber
This was done for experimental purposes...
Melted down the qwiso...
Got a taffy consistency now, probably partially decarbed
That damn cheese is cray full of oil...
Highly recommended strain for extracting.
Edit: meltdown performed at 170° for 10 minutes.. 5 minutes on one side, remove, let cool and flipped the patty over..back in for 5 more minutes.
Last edited:
Qwisoking does dry sifting dissolve the terpene membrane? Like sticking it in hand sanitizer?
Enlighten us dry sift king. Or are you going to tell us to sift our stuff wet and moist to retain the smell you think you're after? Because sifting wet stuff works so awesome right? If you think uber dry trim of any type is going to smell as wonderful as fresh you're insane. Not only that, you've clearly never stored or cured any sift for a month or longer after you harvested the trichs, lol. Much like wine (and i'm in the Napa Valley) there is more to it than what your simple mind believes.
Explain to us vapor pressures and how it has any effect on dry sifting. Clearly the guys in Australia, on the other side of the world, didn't have much of an issue being they took my kits and banged out spot on product on their first try. Vapor pressure lmfao, too much of that ISO left in your smoke broly.
And you're right, there's only one way to do things correctly, so how about you stop with the iso nonsense? Check out my fire rubbing alcohol brah'.
Enlighten us dry sift king. Or are you going to tell us to sift our stuff wet and moist to retain the smell you think you're after? Because sifting wet stuff works so awesome right? If you think uber dry trim of any type is going to smell as wonderful as fresh you're insane. Not only that, you've clearly never stored or cured any sift for a month or longer after you harvested the trichs, lol. Much like wine (and i'm in the Napa Valley) there is more to it than what your simple mind believes.
Explain to us vapor pressures and how it has any effect on dry sifting. Clearly the guys in Australia, on the other side of the world, didn't have much of an issue being they took my kits and banged out spot on product on their first try. Vapor pressure lmfao, too much of that ISO left in your smoke broly.
And you're right, there's only one way to do things correctly, so how about you stop with the iso nonsense? Check out my fire rubbing alcohol brah'.
Last edited:
Texas(THC)
Well-Known Member
im open minded and here to learn not to start solventless vs solvent arguments
hopefully that isn't what It seems, because that is definitely not my intentions
if it makes you feel better qwiz I still run my sifted bud with Etho/Iso
best of both worlds!
is there flaws or needs for improvement in Mnh method, ya
there is in everyone's (BURNED EVERYONE)
LMAO
I don't agree with drying to a crisp, using heat, or even a dehumidifier
but understand that this is just a quick way to make something good to smoke
maybe a thread should be started for this debating/bickering...?
sorry dabs! no more typing for me on this thread just pics for now on
EVERYBODY LOVE EVERYBODY
hopefully that isn't what It seems, because that is definitely not my intentions
if it makes you feel better qwiz I still run my sifted bud with Etho/Iso
best of both worlds!
is there flaws or needs for improvement in Mnh method, ya
there is in everyone's (BURNED EVERYONE)
LMAOI don't agree with drying to a crisp, using heat, or even a dehumidifier
but understand that this is just a quick way to make something good to smoke
maybe a thread should be started for this debating/bickering...?
sorry dabs! no more typing for me on this thread just pics for now on
EVERYBODY LOVE EVERYBODY
Twitch
Well-Known Member
lol there is always more then one way to skin a cat