Hash and Oil Picture Thread

chewberto

Well-Known Member
I finally had the chance to wash my black pheno bagseed from the Girl Scout cookie, I made BHO last time. Anyway! Anybody recommend a good strainer/sieve brand for breaking down. Been microplaning because I have to freeze this due to the grease it makes. Terps are crazy lemon cleaner on the icewax and lemon puppy breath on the flowers. Note pic 3 and the calyxes goo!

image.jpg image.jpg image.jpg image.jpg image.jpg
 

doubletake

Well-Known Member
The cheapo from harbor freight is now a bit different than a year ago...

It actually has brand name, Pittsburgh.
I've run the dog shit out of it, changing the oil every 4-6 runs depending on how big the run(s) are, and how early into the purge you place your oil in the chamber and begin pulling a vac.

Spend the 20$ on the 2year free replacement warranty, and even if you destroy it from neglect, bring it back, you get a brand new vac in the box, no questions asked.

Mine is running like a champ still, pulls full vac in about 30 seconds or less,and is fairly quiet in comparison to some of the 2stage pumps(Robinar?) My friends run.

If the pump is in good condition at the end of the 2 years... I'm getting a new one right before the warranty expires..muwahahaha
*in the voice of Mumra, the villain from Thundercats.
Lol
:fire::P:hump::rolleyes:
Edit: also consider installing a cold trap between pump & chamber.
You can cold boil alcohol and whatnot.
Just got that second pump
And returned my broken one with the new receipt
BAM 2 vac pumps with the warranty so I'll get a new one right before that expires!
Thanks man hahaha
 

doubletake

Well-Known Member
I finally had the chance to wash my black pheno bagseed from the Girl Scout cookie, I made BHO last time. Anyway! Anybody recommend a good strainer/sieve brand for breaking down. Been microplaning because I have to freeze this due to the grease it makes. Terps are crazy lemon cleaner on the icewax and lemon puppy breath on the flowers. Note pic 3 and the calyxes goo!

View attachment 3185429 View attachment 3185433 View attachment 3185434 View attachment 3185435 View attachment 3185436
And that just amazing omg
 

doubletake

Well-Known Member
Quick question also guys
I froze my cans froze my bud
And now I'm breaking it up as I put it in my tubes

1st- Do you guys always break your stuff up iv just been making small say about dime sized nugs sticking them in the tube and freezing them a little longer.

2nd- should I break up first then freeze?
Seems like since it's cold and brittle I'm breaking a lot of trichs each time I handle it.
 

VP#2

Well-Known Member
I powderize mine.

dont think freezing the bud makes a difference as 1. when youre breaking it outside of the freezer, it warms up very quickly, and as soon as that ice cold butane hits it... the buds temperature doesnt even matter anymore IMO as it will either warm or cool depending on the temp of the butane.

I freeze my butane to help keep it liquid, and use room temp, powderized in a coffee grinder buds.

everyone does it different though... there is guys here that will barely break up 2 ozs of buds and only use 1-2 cans of butane through it, whereas I would powderize it and use 4 cans of butane, I rinse it very hard and usually get a 20-25% yield with 0 complaints and impurities except for maybe extra plant waxes due to powderizing? in that case winterizing takes care of that, and I usually lose 10% of my weight when I winterize which is fairly normal I believe.
 

VP#2

Well-Known Member
was doing some random reading about whip it 7x butane and read this... make me think of your question

"I used about 30 grams of trim and popcorn nug, totally dried, not frozen before hand. Used a large honey bee extractor and one can of that whip it, in case anyones curious. I had been running frozen fresh trim but I will never again do that, better yield and flavor this way I found."
 

Sirdabsalot462

Well-Known Member
I finally had the chance to wash my black pheno bagseed from the Girl Scout cookie, I made BHO last time. Anyway! Anybody recommend a good strainer/sieve brand for breaking down. Been microplaning because I have to freeze this due to the grease it makes. Terps are crazy lemon cleaner on the icewax and lemon puppy breath on the flowers. Note pic 3 and the calyxes goo!

View attachment 3185429 View attachment 3185433 View attachment 3185434 View attachment 3185435 View attachment 3185436
Fucking sexy Chewy!!!

Holy Moses!
 

doubletake

Well-Known Member
was doing some random reading about whip it 7x butane and read this... make me think of your question

"I used about 30 grams of trim and popcorn nug, totally dried, not frozen before hand. Used a large honey bee extractor and one can of that whip it, in case anyones curious. I had been running frozen fresh trim but I will never again do that, better yield and flavor this way I found."
Yea man I think freshly dried frozen is the way to go let's that plant smell go and gets the nice bud smell like after buds cure.
 

doubletake

Well-Known Member
I powderize mine.

dont think freezing the bud makes a difference as 1. when youre breaking it outside of the freezer, it warms up very quickly, and as soon as that ice cold butane hits it... the buds temperature doesnt even matter anymore IMO as it will either warm or cool depending on the temp of the butane.

I freeze my butane to help keep it liquid, and use room temp, powderized in a coffee grinder buds.

everyone does it different though... there is guys here that will barely break up 2 ozs of buds and only use 1-2 cans of butane through it, whereas I would powderize it and use 4 cans of butane, I rinse it very hard and usually get a 20-25% yield with 0 complaints and impurities except for maybe extra plant waxes due to powderizing? in that case winterizing takes care of that, and I usually lose 10% of my weight when I winterize which is fairly normal I believe.
Thanks for the detailed response I do not have coffe grinder so I just slightly broke them up
I will Defenetly be getting the coffee grinder though soon.
Does it grind it all in one thing so you can just dump it in the tube resulting in no trichrombs lost?
I usually see lots of kief when I'm breaking up my material and am like fuckkkk that's potential wax/ increase in yield right there.
 

VP#2

Well-Known Member
the kief youre seeing/leaving behind is probably near 1%.. it is in my case anyways.

even a hand grinder will work. or scissors. the amount of trics that are lost is insignificant most of the time, and when built up enough, can be recovered later on.
 

WarMachine

Well-Known Member
later when you go clean the coffee grinder or have grinder, you can clean it up with ISO or Everclear and make a concentrate with the clean up. That's what I do with the hand grinder.
 

doubletake

Well-Known Member
Here's the little batch I'm purging it was 14 grams oil so prob like a 13 gram honeycomb chunk when it's done

4 or 5 hrs in

image.jpg

Then when I woke
Up this morning 23.5 hrs in

image.jpg

Just stating to comb up hopefully only like 4 or 5 more hrs.
 

Guzias1

Well-Known Member
yo, i thinks you could about stop. have a nice honey comb middle, and shatte rlike outside, which will dry out soon enough as well.. just dont want you to over shoot it ya know.. its looking pretty good though.
 

doubletake

Well-Known Member
yo, i thinks you could about stop. have a nice honey comb middle, and shatte rlike outside, which will dry out soon enough as well.. just dont want you to over shoot it ya know.. its looking pretty good though.
Thanks man yeah I wish I blasted this a few months ago so it would of came out lighter.
What would stopping now do just save a the flavor and terps?
 
Top