Hydroponics

yelodrvr · Dec 27, 2008

potroast said:
Yes, a Cool Tube or any air-cooled hood for your lamp, with the hot air exhausted from your closet. Air conditioning should be a last resort, after all other ventilation is taken care of. The larger your plants get, the more cool fresh air they will need. Yes, ideal air temps in the 70s.

HTH

hey potroast (or anybody), what about low temps. my room gets down to 55f-65f at lights off. what you think time for some heat, or is it ok?

VictorVIcious · Dec 28, 2008

yelodrvr said:
hey potroast (or anybody), what about low temps. my room gets down to 55f-65f at lights off. what you think time for some heat, or is it ok?

Average 60, sounds like fall temperatures too me, nice and warm during the day, lots of sun, slowly cooling down at night. Below 50? its time to start considering some heat. Until you get to freezing, lower than 50 will impeded growth, not kill them. VV

czogbe · Dec 28, 2008

I forgot to soak the rockwool cubes before I put my seeds in them. They're growing but just not very fast. Will this be an issue down the road or will they pick up the pace once the roots hit the water properly?

VictorVIcious · Dec 28, 2008

talontsi973 said:
hey guys Im new to growing weed and Im starting out hydrponically does anyone have any pointer they can give me b4 i start.

Hey Talon, sure. Read the start of this thread, pot roast cover all of the different Hydro system and the mediums or mediumles grows. I think its all in the first fourteen or so pages.

czogbeI forgot to soak the rockwool cubes before I put my seeds in them. They're growing but just not very fast. Will this be an issue down the road or will they pick up the pace once the roots hit the water properly?

Well.......hmmm...... so what have you done since then? I am suprised that they are alive, I am going to guess that you have been using ph'd water on them and possible that has corrected the problem. Not sure of any of the details of your system, I would assume your talking DWC or Aero. If your roots make it to the water and you are making sure the water doesn't hit the cube, they will probably be fine. VV :shock:

czogbe · Dec 29, 2008

Thanks VV,
They are still alive and thriving. I took a look yesterday and the roots are starting to come out of the pot, which is a good sign. I'm running an aeroponics system. I haven't messed with the ph yet. It's steady between 6%. Here are some pics at one week. I also have three in soil. This won't be an issue will it?

VictorVIcious · Dec 29, 2008

czogbe said:
Thanks VV,
They are still alive and thriving. I took a look yesterday and the roots are starting to come out of the pot, which is a good sign. I'm running an aeroponics system. I haven't messed with the ph yet. It's steady between 6%. Here are some pics at one week. I also have three in soil. This won't be an issue will it?

Those plants look healthy, soil ph should be around 6.8 if I remember right, your aero system would be run at 5.8.
You may see above ground growth slow for a while ubtil your plants fill the pot with roots, those look like about 3 gallon pots. After that the will take off and catch up so its not a big problem, an extra week should do it. Your planning on using these as the mothers? VV

TheClouds · Dec 30, 2008

is it better for the plants to pluck fan leafs? im in my forth week of flower and it dnt look like its growin quick enough. its a pretty site but it just seems a lil off.

GypsyBush · Dec 30, 2008

potroast said:
Every 4 hours is good, but the 15 minutes is not needed. It's best to flood to max level and drain. With a loose particle medium like growrocks you just need to wet and re-aerate.

HTH

Thanks!

Will it hurt anything to flood for 15 min.? I do have an airstone in the res...

I got to get a better timer.. I am using the cheapo plastic ones with the little green and red ticks....

Thanks Again!! I appreciate all your help! :clap:

TheClouds said:
is it better for the plants to pluck fan leafs? im in my forth week of flower and it dnt look like its growin quick enough. its a pretty site but it just seems a lil off.

Here is a quote from another post...

shanne1020 said:
My little lady is starting to make some bud. Does anyone ever cut off the lower leaves? Will that hurt anything? My reason for asking... I was just curious if the lower parts of my plant would benifit with more light if I trimmed her down.

GypsyBush said:
Leaves turn light into food... take away the leaves.. take away the food...

Add more light.... side lights... whatever you can do to avoid cutting leaves...

but if you feel you must..

runsfromdacops said:
couldnt have said it better myslef. if the leaves are healthy leave them. use some lst if you think it will help

TheClouds · Dec 30, 2008

Thanx mucho.. it also seems like im not gettin enough growth. im in my forth week of flower.... any pointers?

lorenzo08 · Dec 30, 2008

Leaves turn light into food... take away the leaves.. take away the food...

Add more light.... side lights... whatever you can do to avoid cutting leaves...

but if you feel you must..

this is a matter of opinion and technic. more light is always good, so it does hold true, but many books say to trim the lower branches to allow better air circulation and focus the plant more on the parts that will produce bud. in either case, don't trim to much.

TheClouds · Dec 30, 2008

i'm add'n my 3 parts plus cal-mag and nutes. but it looks short for it being in the 4th week of flower.

czogbe · Dec 31, 2008

Thanks for the help VV.
Big up!

testoftime · Jan 1, 2009

HELP! my plants are dying off fast. I tink I have a major problem with algae. And now that i have covered the tops of the cubes it seems that mold or mildew is present. I am doing a ebb and flow using dutch trays and a 1,000 watt light. Slow growth nutes are at 850 ph is 5.8. I was over watering corrected that and now I think this algae is killing them off! what can I do to get rid of the algae?

VictorVIcious · Jan 1, 2009

Use hydrogen peroxide in your res. If you can get the 50% agricultural grade its 1 ml/ liter. VV

GypsyBush · Jan 1, 2009

lorenzo08 said:
this is a matter of opinion and technic. more light is always good, so it does hold true, but many books say to trim the lower branches to allow better air circulation and focus the plant more on the parts that will produce bud. in either case, don't trim to much.

Trimming/pruning certainly has it's place... but you gotta be careful... :-P

testoftime · Jan 1, 2009

thanxs vv I am going to try that

DirtySanchez83 · Jan 3, 2009

i have a question about nutrient solutions... i have the GH 3 part series (grow, micro, and bloom), what do the numbers on the bottle mean? (Example: florabloom is 0 - 5 - 4 ) Also, do i use all three of them at once, or only mix two, or should i just use one at a time. please help me. i'm new to this. i literally just started growing about 2 weeks ago. Never done it before. i got me some white widow seeds and i'd hate to f*ck it all up. oh yeah and can somebody explain the lucas method (i think that's what it's called). your help will be greatly appreciated.... thanks people.

LightFusion · Jan 3, 2009

QUESTION.

how do you guys add nutes to your dwc

i was thinking changing the pure water out with pre-mixed nute solution but i read earlier in this thread that you could go a hole grow without changing the water

wouldn't it be bad just to dump it into the res? I was thinking it would burn the plants before it mixes

I'm gona use cn17 grow/bloom (liquid)

thanks in advance,

and to attempt a decent answer on the previous question, its the nitrogen / phosphorus/ ¿ potassium ? ratio of the nutes. it goes n/p/k , you want a high n for veg and high p for flowering

there should be a chart on the bottle telling you how to use them, start with all grow, transition all to bloom

whysohigh · Jan 5, 2009

lets say you lose power during a storm or something, how long can the plants go in a hydro set up before serious damage is done?

marksk85 · Jan 5, 2009

it depends on the setup i have a dwc and i got a 4 hour air pump power supply from the pet shop so if power failur happens im stilll safe

Hydroponics

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member