Leaf damage? Dtw coco

medidedicated

Well-Known Member
Yawyawyawwww growin and growin just keep on goin. Smelling my banana candy krush got me feeling good. Smellin like a mountain dew with added complexity of gas and banana. Im over it life it short who gives a damn.
 

medidedicated

Well-Known Member
Still a lot of bud right? Im trippin. Thing ablut canopy fans is in my shotty search I read mold can still grow just fine in windy conditions.

They do favor poor circulation though but I dont see people decking out there tents like I did making sure it has air flow you can feel by hand in every space of tent.

So shiett. I never used them even in a 2x2. Only difference is I learned to grow fatter colas this pheno. So indeed those are the only ones molding.

Not bad scanning for more not really seeing any. Only grazed some tops so far. We got 2.5 more wks though. Mold can establish in 12hrs.
 

Attachments

medidedicated

Well-Known Member
Not bad just clippin out tops still got lots lots lots of bud. But I clipped one to see the bud tucked inside below had a fat water dropplet like you see on leafs sometimes for no exact known reason. I think that might be the cause, super fat colas that are just rotting basically even though its from an infection.

At least its a new theory.
 

medidedicated

Well-Known Member
So yea its like 100% rh inside the colas the fattest ones causing droplets. Not lack of air flow or too high room rh its just natural, not even a freak event. I never grew colas this fat homie lol. Just the right veg time and allowing it to do its thing it will chose dominant sites and less dominant sites.

Some pruning too is equally as why. Hmm idk what else thats pretty much it. Letting it grow after that it just had so many dominant tops. Now I think about it idk how they turned out so fat, all I said wasnt much. Much more node spacing until now and hard to believe its just cause of the mentioned.
 

medidedicated

Well-Known Member
With no pruning defolling it becomes diluted growth smaller buds less stacking maybe the light was further so more node spacing too. My fattest tops just were not like this. Maybe its just how this run went and it was out of my control and didnt “create” such fat tops its just luck of the draw this run.

How funny is that, I started out expecting perfect symmetry running clones by definition but learned they can have many differences. All 3 clone runs this tent look very different. Mostly similar in terms of fat desirable buds but spaced out and not mold friendly.

Stacking is the key here, I think thats what its doing that people refer to which is usually good. Not for mold though. Funny funny funny. It stacks harder than last time but its a clone, how does one cause stacking? Wont doesnt one can only let stack. That was zen this is tao.

It wasnt done by me it was done through me. For real though.
 

medidedicated

Well-Known Member
What this mean? Maybe I missed a spike because its resetting making me think it never passed 50rh but its possible it didnt or at least for sure not above 55rh. Is it dying battery? Dying caliber need throw away?

I havent found much more mold and then now like 2-3days no mold spotted. Chop in 13 days. It would be a full 9 wks I usually finish in 10 wks but pruned good and just dont consider the parts I would rub off as the yield. Just chunky larf.

I just didnt remove it because ever since I saw mold I can only open tent for a few mins at a time or else rh spikes. I did prune and defol pretty good a couple times so lots of what Id wait the last week for is just non existant.

Thats how I may of figured out how to just chop and separate the last ditch larf effort all plants grow. Some spawn much more growth than others some none at all. If its opened up enough it can finish head to toe with just another week but mostly done right then and there.

I dont care about have some white hairs I see regular growers do it. Just minimal though. As I check its mostly done so the next two weeks I may not have to even justify chopping a wk early. Im taking cuts in a week lol.

While typing this I stopped to check for more mold Id be damned if I didnt find a couple more spots and I did. But they were infant and caught early. Looked at it under a scope. Still outside working in but just tucked inbetween buds.

Still lots of bud left Im talking just grazing tops as thats where theyre popping up for some reason. Now to check the highs lows on hygrometer a newer one it probably will act the same, not passing 50rh. My old one could of only just now crapped out after spotting the mold or it was good enough not passing 55.

Most people rock 50-60rh theres people doing 80 but they probably gots no spores or other logical explanation. There usually is but what I learned about hash recently is mind bending and tend to describe that superstitiously. This on other hand I already explained. Nothing out of ordinary.
 

Attachments

medidedicated

Well-Known Member
Yea new hygrometer reading the same no spikes nothing above 50rh. So yaw 100% rh in tha colas ya knoww. I cliped a small bud out just now. No need to run from the fight Im handling things traditionally staying on top of it. Its more crazy its not happened until now.
 

medidedicated

Well-Known Member
Heres another couple of darlings same treatment to achieve same growth I finally perfected. Looks dramatic but its the same thing I did to the other two which are fattttt and moldy therefor lol finishing faster too. All prime nug. I can say a easy 9-10wks shell be ready for chop because of this.
 

Attachments

medidedicated

Well-Known Member
Ooo Im gonna check this out give a try. I know the scent works because the fly tape lours them. Well this is scent bait, uv light bait which I found does work, a fan that sucks em in like people do with a vacuum. Then a sticky trap inside to finish them fuckers off. Theyll be the death of my garden who knew.

Or I just keep up the work, I had a nasty outbreak that the fly tape pretty much eleminated most of them. Just wack a mole, it gets under control there then loses control over there. The mother cabinet is where it really started which has H miles bugs in there that must be why its under control there with just them and fly tape.

So a roller coaster of success and fail. The fly tape is getting costly but adds up to the same as that catchy. The bmc I read can expire in water as fast as 24hrs that its safe to add daily so I am so lets see how that goes. Im looking forward to the catchy.
 

Attachments

medidedicated

Well-Known Member
So I got hit with the botritus like I said already but also the dreaded PM. I tossed both plants I tried to salvage what I could but its beyond saving. Too much spores of botritus, some PM and maybe a green mold I seen before though just on a open wound on stem its so bizzare this whole run just went to crap in two weeks.

Ive seen a green mold and a fine dusty caked like mold with botritus in my first grow pretty much. Ive screwed up so bad like packing a plant inside a bag and sealing it it was that packed. I never thought Id see mold again and didnt just get here over night I grew several plants before getting more tents etc.

This is discouraging it sucks but yea I tried to fight it head on but I did read it would happen this way that I should of tossed. Hell I see why they say dont flower a shitty plant but these were spankin new looking at flip. Any insight let me know Im just wondering hell is this the end of the show? If I dont have the fight to get rid of this issue?

Obviously keep pushing forward but thats the type of thoughts Im fighting but its just fun, a hobby. Take the bad with the good I had a decent journey. Idk how all weed in the world that makes it to harvest does it. How much weed you think gets tossed on average idk.

Fans ozone generators and the best clean job Ive ever done on the grow room is all I can think. Keep mothers gaurded could run from seed Idk if the moms lost their immunity already or this mom.
 

medidedicated

Well-Known Member
Growing the plants in a balanced dominant growth in smaller flowers is a given and smaller plants in general since what good are large plants if theyre gone in two weeks right. Aside from that.
 

medidedicated

Well-Known Member
So brown roots keep showing up too that seem to be present in my declining runs. First run from clone no mold no sudden wilting and decent white roots but now theyre not right compared to that. I been fighting gnats too lol another issue. Might be causing it or attributing to it.

Just a thought. Ive had soso looking roots but not like this. They start out real white looking great thats what I dont get. Went from 8x a day fed to well, 8 again then I got brown roots and sudden cola death wilting and now this, a total loss.
 

medidedicated

Well-Known Member
Idk what to get for extra circulation, the fans I had sucked, dont feel much air movement like a turbo fan or 16” pedestal fan. I guess I need them even though it wont reach most of the plant but what I got to lose at this point.
 

medidedicated

Well-Known Member
Im thinking a tower fan or maybe even a 16” pedestal fan. Something that really blow dries them. Just grow small enough plants to fit a fan in there.
 

medidedicated

Well-Known Member
Gonna just apply my logic ration just wingin shit from what I seen. Gonna get a pedestal fan because I see it can move air across a whole room. One in each tent blasting the plant. Cant wait till people ask me why lol. Already seeing dew drops on my other crop. Already pruned it to grow fat and make the same mistake.

Since Im losin bud left n right just chop all doms like now like a super late topping its fine if it stunts anythings better than PM and botritus right now but the pm is top priority that can kill my mum collection which is the real heart of a grow.
 

medidedicated

Well-Known Member
Tower fan can get air through the whole canopy better though as I need to go back to leaving 3/4ths bud on it. Tower will take less space it was tough fitting a pedestal in there last time I tried. Well I do have one so I can mess around with it.
 

medidedicated

Well-Known Member
Im looking at a 100$ ozone generator I can afford to try out but will it help my situation? I never researched just read many times briefly that you use this for that. Is it something you run without plants so it dont have a smell or is ozium different? Is it odor less? Probably. Or not as the search just said it does make a smell.

Hell if its not toxic and different from ozium spray or at least not as bad its better than nothing.
 
Top