Leaf damage? Dtw coco

Yea see thats what I mean lol I will try to fix that. Is the eco heat bar safe to just plop down on the ground somewhere in tent? Or hang it? Or I can get a hps light. My tent is 5x3x6 so not sure. A 200w space heater but its too close to fabric.

Or somehow wrap a heat pad or blanket but rag size around it, idk if that exists but usually 7/10 times it does when I think of something.

Some kind of mini heat pads to wrap around the ALs could probably work, as long as they can withstand a bit of moisture. They have battery powered heated gloves, and wrist warmers, etc. Basically, you could just pull the power pack and heatedwire out of them, and then wrap that around the AL. Use a small transformer instead of batteries to power them.

Water proof LED strips are pretty cheap, and use low voltages. They make a good amount of heat. That's probably what I would end up using. 12v LED strips in the silicone ip67 channels or ip68, with the ends all siliconed up. You only need maybe a few feet or less for each strand. It will look like you're growing a little Christmas tree with lighted ornaments, but keep the medium in the layers warm for sure, lol.

Amherst sour d is out by humbolt on attitude uk someone got 26% rosin out of it. I should get it while I can with some more watermelon ultra seeds. I want new strains and see if going between phenos means you could lose a return percentage switching phenos.

I cant listen to breeder estimate and description, “double than usual hash output with any extract method” but get 10% flower rosin from it. Seeing someone actually grow it in there enviorment and pressing that has got to be the best way to shop.

Anyway so Ive been wondering how Im gonna do seedlings. Im thinking use a paint strainer bag over the existing method tight around the pot and have something prop up the mesh bag so the seedling can grow for 3-4 wks. Then tie it off with the bag off when it can.

Idk if the jell trap is even needed I just thought it might have gaps around the drippers and that solves that. Also a trap of some sort for incoming bugs. Gnats are pretty big and dont get in small cracks easy but idk. I probably dont need to use as much as I do too but it all makes me feel better.

Love growing. Its the reason I keep finding ways to stay broke.

I feel like pm will make or break a new grower and make them change everything they do to grow. I see lots more than not, grows that Im like wow hows that not powderin up. Must not have it to begin with its why I got this far but now thats its here it showed every grow space that wasnt up to par in my room. Like yup Il take this plant, this and that plant.. Hope your whole room aint under code.

I got a wild idea though. This tent has a duct port I could close all vent flaps and run a duct to this semi sealed off area I was going to turn into a dry space. Just use a plastic sheet to tape off like a curtain and its sealed. 200w space heater to warm up the space. Id just need to turn it down to harvest or dry yet somewhere else.

The best ipm is dont get it lol. I used the bathroom as dry room but if someone goes number two youre screwed. Particles all over the weed of a nasty kind. So I found a closet but didnt realize the gas runs through there. I might not give a shit about drying in perfect settings I tend to notice strains do or dont need curing to turn to flavorful rosin I think Il just run those.

Its a weird qwerk that one strain I run had but if it does it must be cured. Anyway theres that for upping temps to 75f or more, safely. Lasko heater so I trust it.

Il look into the suggested I just kept thinking about it because really 66f is low and I do get slower growth from it a bit wonky. Cant really handlee the slightest increa of light. If thats ok though then thats good as I rather turn this into a dry space or keep it as is but thats only good for when I was realing in couple pounds at a time but those days are ooooverrrr.

If I have to truly nuke the space I surely aint doing all that to have the same issues. I was told my plants were too big and bushy I didnt listen though. I was just following what I see everywhere pushin every space nicely but damn if you got spores I wouldnt do that. Even if I didnt as then you already know.

Il probably do the waterproof led strip idea sounds the simplest. I tend to choose the simplest solutions. Hobby at this size takes a lot out of me lol a little or a lot each day so Im worn thin and just want to find a solution or else I would tinker more. Thats how the space cabinet was built, before I ever really grew.

I might pull the trigger and get one of these washable K&N merv13 furnace filters to try out for my BFFUs. They're spendy, but would be nice if they really do last for years.

Just put it on 1min on 30sec off I just hope the nearpow dont malfunction and stay off. Its the easiest timer to use and hasnt malfunctioned yet I just use the cycle time on/off time setting its hard to forget.

Would having two fans one on each side like I first had it a good idea if I alternate sides? It seems like the plant closest to fan, the parts closest to fan dont indicate much movement. Its right next to it though. So if another fan on the otherside turned on periodically it would get more plant coverage.

I just wouldnt do both same time as I realize with common sense or maybe wrong, that the two would battle and cancel some of eachother out. But if they alternated.. The furthest plant gets great coverage.

My plants just look like crap under the vipar even when starting and keeping 50% at a pretty high position. Like 1.5ft high for a 12” light. Lol just measured it its exactly 1.5ft high. So its hard to tell if its the light or fan or both but my mars hydros ts1k will do great at 100% no issues but now its 50% as plants are very small than usual, may bump it later or save and cool the room easier.

Will do 1min on 1min off if it gets scruffier. Lol idk if thats how to describe it I may of made that up. I do things like that often.

I thought about that, when you showed a fan on each side. If you had an extra timer, you could make them alternate, with a short break in between. I'm sure you have pretty good circulation now as is though, but that could be cool!

Porto leche and kongs krush rooted in 6 days?! well I got a copy of my flowering plants aside feom banana candy krush which I have seeds thats why I tossed. Keep wpm away from rest of garden. The banana wasnt worth saving she really dissapointed me in yield its only good for taste. Its like runtz if they only focused on the banana flavor then krushing kush gas like it says.

Kinda cool first strain to taste what its name is but yea I dont mind tossin it and doing a seed again. If I really want it. I never rooted in 6 days crazy but its not been sprayed with copper so lesson is unless its just me dont spray copper on them lol or dont let it touch the root area and soak in there. My sprayed cuts of watermelon ultra not rooting looking horrible going to plant the PL KK and toss the rest.

So it was a good call to reveg a clone to keep the WU it pays the bills keeps stash jars full to the brim like it says. Not everything they say is tight though damnit Il never forget that. Always judge it through a regular growers setup its raw results. BCK only journals show raggity plant report no smell and indeed its been in jar for some days. Not smelling much, not a good smoke.

Maybe everything from t h seeds is like that lol I just got two strains that are super og kushy and smoke harsh like its a hasher. It is but not the BCK. Other than taste and potency.

Im gonna try and do a blue berry bang bang if all keeps going well, preferrably in my test lab here. Was about to toss but its expensive and actually might be saved same way I did the others. Just plop a fan over top maybe make a closed awning like cover so fam can intake from sides block light.

It will easily blow between bar lights. Just make it less bushy its a 60% sativa though in that pic. Last run clones were much smaller. Im defolling more than ever its hard not to when youve dealt with pm once already.

Heres one. PL. Not very easy to tie up and goop. Workin though. One more. So in theory no more gnats.

Shit startin get nervous about air layering. When you say they can die if not enough roots on the site is it because the branch grew into a larger plant already and needed more root to sustain? Can I just treat it like normal cloning and just try to get the cut soon as it roots as a small branch? Is it kind of a dance on getting the perfect cut?

That's usually only a problem when you take much bigger AL clones, and cut them away before it has enough roots to sustain, or if you didn't use enough medium for it to fill out in to start with. Sometimes the bigger ones need a little help if you remove them too early. Smaller regular sized clones shouldn't be a problem though.

And the kongs krush. Porto leche already throwing a huge fit. I dont usually have a fan on them and I know clones hate wind when rooting or right after planting. Watermelon ultra is hearty but sometimes limps a little. KK will limp play dead after first cutting the branch but the high o2 in root riots perk them back up.

The PL is scaring me a little though. They can only limp for so long and hard before they crunch and die. The KK Il keep because its at least 15% hash return and really aromatic. Needs to cure though that sucks but itll sharpen those skills in case I ever give weed away again. My last customer my family wants more lol.

Its a treat strain. Super fruity no gas its a nice step away from the overly used og kush.

Day 8 of flower lookin good. Theres a gnat in the pot though so same thing with all of them pretty much. Need to treat with athena ipm and spray too. Idk if I will get results like using bti hope not as they can screw everything up will see.

That PL still lookin dead as hell oof. If it bounces back thats a trait I guess I dont like. I just had KK on stand by so I only planted it a few times but recall it doesnt do this. It just turns convincingly dead after cuts if you dont get it to some high o2 media like rootriot or aero asap.

BCK is like my WU same breeder no coincidence? They behave pretty well and hearty they dont limp unless its “almost” too late. So is this a trait or did I choke it with the plant tie? Did I break a main root of only few roots idk. Another few days will tell it might be dead.

If dead and no signs of any brute force killing it then hmm. Might be best to AL or maybe it will be even worse? Damn this PL supposed to do 23-28% hash return through a test another member did here for me. I suppose thats like yall buying WU and expecting 19-20% hash return if you hand trim it. Flower rosin though as Im sure different methods yield different. It did with a bubble wash test.

The WU one of 3 cuts popped roots by the way. Too early to plant maybe not maybe my big 3/3 clone has perfect fan coverage to be replaced by same size clones to flip.

I got the ip67 scilicone coat led strips with dial so I can dial in 80f with a turkey probe. Making my first bffu soon. Will get the rest of fans on timers may need more timers and ext cords since they take up too much room on power strip. Will need to wait for that Im broke lol. Just been buying grow stuff non stop for a year straight.