N NewBKind Well-Known Member Sep 26, 2017 #81 I'm going to add an inline 5 amp fuse since the driver is rated at 4.8 amps. I also want to put a toggle switch on each cob to allow individual testing/maintenance without interruption of light, making them hot swappable
I'm going to add an inline 5 amp fuse since the driver is rated at 4.8 amps. I also want to put a toggle switch on each cob to allow individual testing/maintenance without interruption of light, making them hot swappable
K keepsake Well-Known Member Sep 26, 2017 #82 cob kit said a 5 slot wago can run 4 cobs per driver i have 16 cobs so i only need 4 wagos right? why are you suggesting 8? sorry I'm confused. I'm an extreme noob to this stuff also, do i need to buy wires or will it be included? @CobKits
cob kit said a 5 slot wago can run 4 cobs per driver i have 16 cobs so i only need 4 wagos right? why are you suggesting 8? sorry I'm confused. I'm an extreme noob to this stuff also, do i need to buy wires or will it be included? @CobKits
N NewBKind Well-Known Member Sep 26, 2017 #83 keepsake said: cob kit said a 5 slot wago can run 4 cobs per driver i have 16 cobs so i only need 4 wagos right? why are you suggesting 8? sorry I'm confused. I'm an extreme noob to this stuff also, do i need to buy wires or will it be included? @CobKits Click to expand... You need one wago for positive and one for negative or you'll just short the driver at the block. So 2 per driver per 4 cobs
keepsake said: cob kit said a 5 slot wago can run 4 cobs per driver i have 16 cobs so i only need 4 wagos right? why are you suggesting 8? sorry I'm confused. I'm an extreme noob to this stuff also, do i need to buy wires or will it be included? @CobKits Click to expand... You need one wago for positive and one for negative or you'll just short the driver at the block. So 2 per driver per 4 cobs
N NewBKind Well-Known Member Sep 26, 2017 #84 NewBKind said: You need one wago for positive and one for negative or you'll just short the driver at the block. So 2 per driver per 4 cobs Click to expand... You could even add more cobs by daisy changing wagos but there are far more elegant solutions for that
NewBKind said: You need one wago for positive and one for negative or you'll just short the driver at the block. So 2 per driver per 4 cobs Click to expand... You could even add more cobs by daisy changing wagos but there are far more elegant solutions for that
K keepsake Well-Known Member Sep 26, 2017 #85 ok so i got 16 cobs 16 heat sinks 16 ideal holders 8 wagos 4 drivers what else do i need besides the frame? wires?
ok so i got 16 cobs 16 heat sinks 16 ideal holders 8 wagos 4 drivers what else do i need besides the frame? wires?
N NewBKind Well-Known Member Sep 26, 2017 #86 keepsake said: ok so i got 16 cobs 16 heat sinks 16 ideal holders 8 wagos 4 drivers what else do i need besides the frame? wires? Click to expand... A roll of 16-2 For long runs between driver and cobs, or 18-2 Like he sent me for short runs is fine.
keepsake said: ok so i got 16 cobs 16 heat sinks 16 ideal holders 8 wagos 4 drivers what else do i need besides the frame? wires? Click to expand... A roll of 16-2 For long runs between driver and cobs, or 18-2 Like he sent me for short runs is fine.
Twohi4h Well-Known Member Oct 20, 2020 #87 keepsake said: I have a 4x4 tent that is 6 ft tall. I have a 1000w HPS in there and yield about 2 lbs. Which LED light will give me the same yield and quality? Also, is 6ft high enough or should I upgrade my tent to a 8ft? My budget is $1,000. Should I go DIY or buy a commercial one? Click to expand... almost 2lb in a 4x4 with a 1k HPS.... I'm doing everything wrong!
keepsake said: I have a 4x4 tent that is 6 ft tall. I have a 1000w HPS in there and yield about 2 lbs. Which LED light will give me the same yield and quality? Also, is 6ft high enough or should I upgrade my tent to a 8ft? My budget is $1,000. Should I go DIY or buy a commercial one? Click to expand... almost 2lb in a 4x4 with a 1k HPS.... I'm doing everything wrong!