The leaf edges aren't looking good. What happened? Do a flush with ~ 100ppm nutes
Looking back to 8/29, I can see problems. Leafs are round: they should be elongated
Pics from 9/9 look much better, but pics from 9/19 the edge serrations are round (not good)
What's your tap ppms and what is pH of mixed nutes?
I recommend you remove the larger leafs from the undergrowth below the 3rd node from the top. This will allow better air flow
Are you using a circulating fan (you need to) and replace the clear tubing with darker tubing
hth
First, want to thank you for looking things over!
There has been some issues with pH, nutes and lights.
I just invested in a R/O system after trying to be cheap. Big help with pH being more stable now.
ppm of tap was ~275, now it is ~25
Had not been checking ppm of nutes prior to getting r/o water. They are now ~500 on change water day (Sunday), but rising steadily since.
pH had been getting up near 7 overnight, now it only rises a couple points ie 5.8 becomes 6.1 or 6.2
I have a small 6" fan in the tent running 24/7 and a 16" oscilating fan runs when lights are on.
I will try trimming some lower leaves in the morning when I change water and do the flush.
I have black tubing running from the airstones out of the lid and about 6" past, then a coupler for quick disconnect, then the clear hose.
Todays pics: