Marijuana Bloom with 504W LED

Status
Not open for further replies.

LEDGirl

Active Member
thought i would point out what you said. When at the begining of the thread you claim to have developed these lights.
I did develop every aspect of these lights, from the spacing of the LED's on the board, to the arrangement of the LED's, nm output, spectral ratio, and light intensity. So you think that because the lights are manufactured in China, that changes anything? They make a light to my exact specs, send it to me and I test it. Then I did it again and again, until I had something that actually worked... I developed these lights 100%, but I don't manufacture them.
 

LEDGirl

Active Member
I encourage people to use the "ignore" feature, now I don't have to worry about Let There Be LED.
Let me know how so I can as well. I've sent reports to moderators SEVERAL times, but it seems as though they're all too busy getting high or something...
 

LEDGirl

Active Member
you must be her wifey.. I don't think anyones really buying these.. and if you are.. link to the test results, and make sure their not in HER grow room. kthx
My wife doesn't post on forums, but whatever excuse you need to make for why I have support here, and you have ZERO.

I'm tired of listening to your bullshit, and it doesn't matter if you continue spewing shit till it comes out your ears, nor does it matter how many lies you try and tell about my products:

IT WILL NOT CHANGE THE RESULTS OR THE FACT THAT THEY WORK BETTER THAN ANY OTHER LED GROW LIGHT IN THE WORLD.



I'll be ignoring you until I figure out where the ignore button is... Hopefully the mods will step in soon and get rid of your scum ass anyhow...
 

LEDGirl

Active Member
So everyone, remember that AK47 that my friend chopped 1.5 weeks early!?!?!? I have the final weigh in at 7.5 ounces. Too bad she didn't let it go all the way...

The strawberry cough plant she has is looking like it will yield anywhere from 12-16 ounces and it should be finished within a few days.

If you remember back further, I stated that my friend had some AK47 in a jar that was grown under her previous HID setup (3800W). I wanted to illustrate the difference in density between HID, and LED, so I took a side-by-side photo of two very similar sized buds, and weighed them. If you're wondering, the LED is the denser of the two, proving that it's not about size after all, it's about weight ;)

Lastly you'll see the total bud from the AK47 being weighed...
 

Attachments

Wemp

Well-Known Member
While I appreciate your input, LEDGirl, there is no way you can convince me that LED lighting can do this:















I just fail to see how LED lighting can even compare to HID lighting. Sure, you'll save a lot of money on your electric bill, but you'll never grow anywhere near the amount with comparable wattage.

I agree... and i think it is deffinitely obvious but it is different and a very cool way to grow
 

LEDGirl

Active Member
Yep, there are many different methods, and each suits the person growing. You like large, single-cola plants and I like smaller bushier plants with lots of head colas. That's why I taught my friend to use the same method ;) You did a nice job with your buds by the way, kudos!

I MUST SAY, THE IGNORE FUNCTION IS SOOOOO NICE. YOU ALL SHOULD GIVE IT A TRY WITH THAT "Let there be LED" moron... Just click on his name and it will take you to his profile, then click "user lists" and hit "Ignore User". You won't have to see any more of his posts, EVER!!!
 

Wemp

Well-Known Member
Yep, there are many different methods, and each suits the person growing. You like large, single-cola plants and I like smaller bushier plants with lots of head colas. That's why I taught my friend to use the same method ;) You did a nice job with your buds by the way, kudos!

I MUST SAY, THE IGNORE FUNCTION IS SOOOOO NICE. YOU ALL SHOULD GIVE IT A TRY WITH THAT "Let there be LED" moron... Just click on his name and it will take you to his profile, then click "user lists" and hit "Ignore User". You won't have to see any more of his posts, EVER!!!

Well you can also change that by different ways of cultivating the plant, like topping... So not all HID plants are going to be single cola plants... I dont think the type of light is going to change the plant structure
 

LEDGirl

Active Member
Whats the heat in the grow room like with your LED light running im curious.
My 10' x 8' Room gets up to 95 degrees with my 1512W LED setup. I also run 1500ppm CO2 which allows me to run my plants at higher temps without stress, and LED's don't create heat stress from the light source, so plants can take it easier than HID at high temps.

When I run out of CO2, I turn my A/C unit on. I'd say it operates for about 5-10 minutes every hour to keep the room at 85.
 

LEDGirl

Active Member
Well you can also change that by different ways of cultivating the plant, like topping... So not all HID plants are going to be single cola plants... I dont think the type of light is going to change the plant structure
Yep, plants in my garden get topped 2-3x prior to entering bloom. They also get 18" tall and the total process generally takes about 4-5 weeks, but you get very high yielding plants. I have plants growing in my LED garden right now that will produce colas similar to yours when done, except 2-3 per plant. They should be finished in a few weeks, although they underwent a little stress recently since I was gone on vacation...

(AGAIN, I JUST CAN'T EXPRESS HOW COOL THAT IGNORE FUNCTION IS. YOU SEE NOTHING THE PERSON YOU'RE IGNORING TYPES. I THINK I LOVE THE SOFTWARE ON THIS FORUM)
 

scumbragger

Active Member
So everyone, remember that AK47 that my friend chopped 1.5 weeks early!?!?!? I have the final weigh in at 7.5 ounces. Too bad she didn't let it go all the way...

The strawberry cough plant she has is looking like it will yield anywhere from 12-16 ounces and it should be finished within a few days.

If you remember back further, I stated that my friend had some AK47 in a jar that was grown under her previous HID setup (3800W). I wanted to illustrate the difference in density between HID, and LED, so I took a side-by-side photo of two very similar sized buds, and weighed them. If you're wondering, the LED is the denser of the two, proving that it's not about size after all, it's about weight ;)

Lastly you'll see the total bud from the AK47 being weighed...
How long did she flower for? veg? and how tall was the plant?
 

scumbragger

Active Member
Yep, plants in my garden get topped 2-3x prior to entering bloom. They also get 18" tall and the total process generally takes about 4-5 weeks, but you get very high yielding plants. I have plants growing in my LED garden right now that will produce colas similar to yours when done, except 2-3 per plant. They should be finished in a few weeks, although they underwent a little stress recently since I was gone on vacation...

(AGAIN, I JUST CAN'T EXPRESS HOW COOL THAT IGNORE FUNCTION IS. YOU SEE NOTHING THE PERSON YOU'RE IGNORING TYPES. I THINK I LOVE THE SOFTWARE ON THIS FORUM)
ok now I'm jealous....how do you do that ignore thing?
 

LEDGirl

Active Member
How long did she flower for? veg? and how tall was the plant?
The plant was put into bloom between July 26? If I wasn't an hour away I'd check, but I recall reading the 26th on it's tag. It generally blooms around 9 weeks which meant it should have harvested around the 28th of this month. Instead it was harvested around the 17th. The plant stood just under 2.5'
 

LEDGirl

Active Member
ok now I'm jealous....how do you do that ignore thing?
Click on his name (I can still see when he posts, but nothing else) and go to his profile. Once there, click on "User Lists", then "Ignore User". It's like someone pressing mute on a show or commercial you just can't stand. Except I think this is better cause you don't hear or see bongsmilie

It's so much more peaceful when you use that function ;) Plus, it takes away from his available audience which I'm guessing is getting smaller and smaller. Too bad I haven't figured out how to leave negative rep points yet...
 

Wemp

Well-Known Member
Haha that made me laugh,

"It always feeeells like!!! Somebodies Watchin meeeeee!"

I would snag that bag in a heartbeat aha

:lol:
 

fdd2blk

Well-Known Member
Let me know how so I can as well. I've sent reports to moderators SEVERAL times, but it seems as though they're all too busy getting high or something...
actually, if were up to me, i'd just close this whole thread. i'm doing my best to let you all work it out in a "professional manner". if you need a babysitter, just say the word. :fire:
 

LEDGirl

Active Member
actually, if were up to me, i'd just close this whole thread. i'm doing my best to let you all work it out in a "professional manner". if you need a babysitter, just say the word. :fire:

I thought moderators were here to keep the peace, not make people hit the ignore button in order to stop being pissed off by some ignorant asshole. From post 1 on here, all he's done is attack, slander, and baselessly bash me for posting results of my grow and my friend's grow online. I have hit the report button now several times so that appropriate action could be taken, instead of making me defend myself against his relentless BS. I'm not the only user that has pointed this out, nor the only one who has clicked ignore, so please do us all the favor, and "discipline" the "baby" so we can all get back to this thread like adults and carry on in a progressive manner.

There would be many disappointed people here if this thread were shutdown. Don't punish everyone for 1 relentless slanderer. Take care of him so we can all continue in peace.
 

KenWood

Active Member
Hey LEDgirl.

I was wondering if you notice at anytime your leaves turn yellow? What is the average weight you get per plant?

GREAT GROWS!!

KenWood
 

laserbrn

Well-Known Member
I could've sworn this thread was closed and now it's back? I was actually a bit disapointed that it was shutdown. This is a legitimate grow journal, even if it does showcase a product designed by the OP.

I would like the OP to defend her product against the charge that it's the same china-made product that is available elsewhere.

Where do the differences lie? Where is the ACTUAL cost difference?
 

project fuoro

Well-Known Member
My wife doesn't post on forums, but whatever excuse you need to make for why I have support here, and you have ZERO.

I'm tired of listening to your bullshit, and it doesn't matter if you continue spewing shit till it comes out your ears, nor does it matter how many lies you try and tell about my products:

IT WILL NOT CHANGE THE RESULTS OR THE FACT THAT THEY WORK BETTER THAN ANY OTHER LED GROW LIGHT IN THE WORLD.



I'll be ignoring you until I figure out where the ignore button is... Hopefully the mods will step in soon and get rid of your scum ass anyhow...
I know this is your thread and whatnot, but I am not sure you can honestly say they work better than any other LED grow light in the world. Just because you have not seen results with your own eyes from LED's other than yours. Not tryin to cause a rukus, but thats a bold statement.
 
Status
Not open for further replies.
Top