fabfun
New Member
New thread added
headed there now
Micro CFL Grow Box
- Thread starter SlimJim503
- Start date
headed there now
SlimJim503
Well-Known Member
Nah im used 1750 lum 26 watt 2700K for flowering on this grow like 8 of them and it was just a test run i have another grow going its under my sig check it out! I found party cups aren't so good for start to finish but having them in the cups till the 3 or so node then transplanting is the way to go if you wait to long you stunt your plant to much!!!I have some i transplanted a week later on my current grow and you can tell they aren't going to do much and they were badly root bound at time of transplant we'll see. I really like smart pots have a #3 going right now and couldn't be happier and neither could my Green House White Widow!!!! Current grow i will be budding again with 8-12 of the same CFL 2700K bulbs...
fabfun
New Member
party cups are no party when u got to water them all the time
more soil less watering
a party cup grow will work your ass if u got a bunch
boxingfan21
Member
Man... what seeds are those? You didn't even post what seeds you used
SlimJim503
Well-Known Member
They are from a white widow that hermied and i got like 50 or 60 seeds out of a OZ everyone has been female and DANK. If you find seeds in a bag of good weed keep and grown them most of the time they are female unless they are just riddled with seeds then most likely the grow had reg plants and not a female that hermied and self pollinated. If you buy a OZ and only a few nugs have seeds then those seeds are most likly female and awesome to grow. Its like buying weed that pays for itself and then produces endless amounts of dank for you. I know from that OZ i bought i have grown out 3 OZs and if i could grow full sized plants i would have grow out pounds already of this shit and it was kinda free besides that fact it took up weight in the OZ i bought but only like 2 grams so $20 worth and ive grown $600 worth if sold in OZ's. But i smoke and dont sell.
unlucky
Well-Known Member
So im new to this site the forums kept poping up during google searches on info about grow box's and you all seem to have your heads on straight so....... HERE I AM
My Box "I dont have pics but will be buying a cheapo digital so i can post pics to get better help and advice.
Specs
Height=29 1/2 inches
Depth= 18 inches
Width= 17 1/2
Door=13 inches Wide/25 inches Long
Okay so im looking to Build this bad boy into the ultimate CFL "NO ODOR" STEALTH BOX.
My Ideas are as follows
Fulling automated fans Thinking about this from cooler guys.com they have a duct system that could work nice with a carbon scrubber also its fully programmable and has a thermal probe that shuts the fans on and off due to temp inside the box.
Fan Combo "can run up to 4 fans"
http://www.coolerguys.com/840556091639.html
Duct
http://www.coolerguys.com/cgfvdt120.html
Im thinking i will put intake at the bottom ,exhaust at the top. common sense.
Now for the duct and scrubber setup. The setup will involve two scrubbers one at intake"Inside the box" and one at exhaust"Outside of box".
Intake scrubber box design ideas
Specs
Length= 8 inches
Width= 6 inches
Height= 6 inches
Top=10 inches by 8 inches
Make a wooden box large enough to mount 120mm fans".
second leave the top or bottom larger in size for this lets say the top is larger. Now the Top must be sealed but removable to be able to change carbon filter. Also the top must be bigger for mounting reasons. Now cut a hole for the 120mm on the bottom"smaller side" then to one of the 6 inch sides. Panty hose and carbon on the inside. Mount it to the Inside of the box at the top so that it is removable and the the side hole is facing down. The mount fan on the side blowing in and a fan on the bottom blowing out. Then mount the Duct to the fan on the bottom of the scrubber facing exhaust the one that's blowing out then mount the other side of duct to the exhaust fan. Then a Cone style carbon filter on the out side of the exhaust.
Now i need HELP with LIGHTS plz and any thought on the exhaust odor killing system i described above.
The box was a movable work bench and there was a wooden self at a Height of 16 inches i removed the shelf opening the full 29 1/2 inches leaving the wooden self support alone i think its 1/2.
Thanks
Slim
lol ye defo need holp...give it up as its shit
......stop the bull shit pics... Similar threads
