Money no object LED

Alctrz8849

Well-Known Member
Gavita 1700e Pro
Every MFR has a few like this. Can't make every single unit produced absolutely perfect. Still a solid trustworthy brand and I don't even have one. I had the Osram Fluence Spydr 2P light do this to me too and they're still the gold standard from my perspective though despite the hiccup. They happen. Work with the MFR and see what they say. Good luck!!
 

Nutty sKunK

Well-Known Member
Every MFR has a few like this. Can't make every single unit produced absolutely perfect. Still a solid trustworthy brand and I don't even have one. I had the Osram Fluence Spydr 2P light do this to me too and they're still the gold standard from my perspective though despite the hiccup. They happen. Work with the MFR and see what they say. Good luck!!
Im sure the brands good and you’re right, always one that doesn’t work.

Trouble is it’s a pain in the ass to ship back. Not like a HID light where you’re able to change bulbs, ballasts etc

I’m sure it’ll be fine. The shop is wanting me to send it back but I didn’t take the pallet on delivery. Just cut it off and carried it. Now I have to source a pallet and secure it on there lol
 

thumper60

Well-Known Member
Im sure the brands good and you’re right, always one that doesn’t work.

Trouble is it’s a pain in the ass to ship back. Not like a HID light where you’re able to change bulbs, ballasts etc

I’m sure it’ll be fine. The shop is wanting me to send it back but I didn’t take the pallet on delivery. Just cut it off and carried it. Now I have to source a pallet and secure it on there lol
Mine been running good 3 months here but what a pain shipping that beast hope your got the box, I needed 2 people just move it an hang.This is the main reason i wont buy anything that does not fold for now on.
 

Nutty sKunK

Well-Known Member
This was why I chose ChilLed. Repair-ability. Easy to go their website and order a new board and install it vs shipping a whole light fixture. Sucks man, hope the turn around time is good for you.
Just getting a refund. Done one cycle and all went south due to low temps and high intensity. That light in that 4x4 tent is crazy bright. Had like 3/4 nodes and a couple inches high.

I already have central heating, space heater and tubular heater near tent. I’d need another 2-3 space heaters to get the room up to temp which is completely pointless as it’s costing me more to heat the room than to run the light!

So trying a 630w DE CMH. Which is also dimmable
 

m4s73r

Well-Known Member
Just getting a refund. Done one cycle and all went south due to low temps and high intensity. That light in that 4x4 tent is crazy bright. Had like 3/4 nodes and a couple inches high.

I already have central heating, space heater and tubular heater near tent. I’d need another 2-3 space heaters to get the room up to temp which is completely pointless as it’s costing me more to heat the room than to run the light!

So trying a 630w DE CMH. Which is also dimmable
Interesting. Whats the temp of the room that your tent sits in?
 

Bucsfan80

Well-Known Member
Has anyone mentioned BLI. Made in USA if that's matters and seem like some solid lights. The perfectpar 650 looks nice and for 5x5 I can't speak from personal experience I was just looking around and came across them. One day I'll be able to get off the porch and play with the big dogs lol.
 

Buddernugs

Well-Known Member
"Interested in the Gavitas, can someone point me in the right direction? I run a 600hps in a 4x4, tried dual 400's but was a bit hot. Want even coverage is all I ask."

No other fixture on the market gives you the spread that the gavita does......do yourself a favor, do a google search for "sshz and Orange Gasm" which is my thread on another site with over 42,000 views and growing about 1,000 views a month. It was my first grow under LED's, I got over 106 oz in a 4 X 8 space under two of them. There's a ton of info in the thread by many people, but results speak louder than words.
Has anyone else noticed that BK 78 laughs at everything that is better than his grow?
 

oill

Well-Known Member
Looking to switch my old 600wHPS/MH light for something top notch.

It’ll ideally need to cover a 5x5 tent footprint.

I was looking at a gravita 1700 this morning which seems decent but says it might struggle to fully cover a 5x5 area.

What would u guys recommend I look at?

cheers!!
Hlg diablo
 

SSHZ

Well-Known Member
So I see this thread is still alive and cooking......I'll again post a link to my very first gavita 1700e grow from last year. It currently has over 66K views on the Farm, and the thread has been locked since March so no comments have been added since then.


I'm back to comment now, as I have 5 grows under my belt and about to finish my 6th in about 2 weeks. All told, the Gavita's still are performing admirably with no issues or problems. I continue to average about 100 oz a crop in the 4 X 8 sq. ft space. under 2 of the LED's. I pretty much have it down pat about now and don't really spend much time in the room other than to water and give a quick look/see. Defoliation continues to be an important part of all my grows, and helps in many ways, which I've detailed before early in this thread.

To be sure, there are better LED's on the market just about now. Independent reviews have confirmed this fact. I plan on going another year and a half and replacing both of these- so 3 years total feels about right. I won a Medic Grow Fold 8 in a contest and that hangs in another room for emergencies when needed and as a back up just in case. It's a nice light for $589 delivered, close to half the price of the gavita. I have no idea what direction I'll go with next time, and expect further improvements to continue every couple of months. But for now, the Gavita's are just fine for my purposes and a few oz here or there makes no difference- they remain a high quality LED that take alot of abuse as I hit my head on them 20X a week.

We can debate forever the issue, fact is, grower skill and strain selection are just as important as light quality.
 

Alctrz8849

Well-Known Member
Im sure the brands good and you’re right, always one that doesn’t work.

Trouble is it’s a pain in the ass to ship back. Not like a HID light where you’re able to change bulbs, ballasts etc

I’m sure it’ll be fine. The shop is wanting me to send it back but I didn’t take the pallet on delivery. Just cut it off and carried it. Now I have to source a pallet and secure it on there lol
Wish I could help out! I work at a warehouse and am in with walking distance of a ton of pallets!!

Definitely ask the MFR to send you a shipping label as it should be under warranty I would assume and you shouldn't have to pay the cost for their defects. It's the cost if doing business sometimes! Like I said, I work at a warehouse for a supply chain so I'm all too familiar with how an efficient org should operate! Not everywhere will, but quality MFRs should cover your cost.
 

ricman

Well-Known Member
You getting the new 720s?
I’ve got the 650’s... they are advertising the 720 for a 5x5... my trays are 4x4.. so I don’t see the need... also when you start pushing the wattages up on these LED’s.. I think you start to loose some of benefits that make them attractive to buy... which for me was less electricity and heat for the same yield... just my opinion... good luck to you.
 
Top