Need help connecting Pump to PVC pipe

Ladiesonly

Well-Known Member
Im looking at plumbing for drip system. I need a connector piece to connect my active aqua pump to PVC. I know how to do flexible tubing but need PVC in this application. Anyone know how to do this Pump to pvc?
 

Alphonso OG

Well-Known Member
Im looking at plumbing for drip system. I need a connector piece to connect my active aqua pump to PVC. I know how to do flexible tubing but need PVC in this application. Anyone know how to do this Pump to pvc?
A picture would help. Just a quick guess ill say a sharkbite product.
 

Nizza

Well-Known Member
I think that is a 1/2” NPT thread. You would likely need a 1/2 male adapter then a reducing coupling to increase the 1/2 to the 3/4 pvc you are most likely going to use

what I did was got a second barbed adapter fitting, then I took flexible hose and used it in between my watering manifold and my pump
 

Ladiesonly

Well-Known Member
I think that is a 1/2” NPT thread. You would likely need a 1/2 male adapter then a reducing coupling to increase the 1/2 to the 3/4 pvc you are most likely going to use

what I did was got a second barbed adapter fitting, then I took flexible hose and used it in between my watering manifold and my pump
I would be okay just running a short run then piece the 3/4 inch flexible hose and run 1/4 inch from each peircing no Manafold. Outdoor we just pierce the main line and attach 1/4 runs off it with emitters. We don’t have the pressure though, which could be why manifold is needed
 

Nizza

Well-Known Member
I would be okay just running a short run then piece the 3/4 inch flexible hose and run 1/4 inch from each peircing no Manafold. Outdoor we just pierce the main line and attach 1/4 runs off it with emitters. We don’t have the pressure though, which could be why manifold is needed
Have you tried to unscrew the barb at the top of the pump? If you want to go straight from the pump to PVC, you can take that nipple out and screw in a pvc fitting with an adapter.

I have the manifold so that I get more even distribution, all of the waste water goes to a bucket that I have to dump manually and I am trying to be careful with water/nutrients because it is R/o water

I used this system https://floraflex.com/product/quick-disconnect-pipe-system/ with the matrix discs for my DTW coco setup
 

JacFlasche

Member
Im looking at plumbing for drip system. I need a connector piece to connect my active aqua pump to PVC. I know how to do flexible tubing but need PVC in this application. Anyone know how to do this Pump to pvc?
If you can, use PEX or some other pipe that isn't known to be toxic. I guess there is a fat chance of getting people to stop using pvc, but if you care about your endocrine system it is advisable.
 
Top