Pictures of your DIY lights - Post your pics!!!

I call it the Planck.
Y7FDmI0.jpg


5 Citi 038-1208 3000k
5 Citi 038-1208 5000k
on an HLG240

10 XPE Red
12 XPE HE Photo Red
8 XPE Far Red
4 SemiLEDs UVA
on an HLG60

1k7a33K.jpg
 
xX_BHMC_Xx said:
7.984" profile from HSUSA, 32" long. About 2" thick including the fan on top.
Click to expand...
I ain't heard that "HSUSA" in a while lol
I use mostly arctic active heatsinks as the big sinks are as rare as hens teeth in these parts.
The blues n reds fill in the spectrum real nice I'd imagine.
Are the wee ones glued on?
Neat build.
:cool:
 
Moflow said:
I ain't heard that "HSUSA" in a while lol
I use mostly arctic active heatsinks as the big sinks are as rare as hens teeth in these parts.
The blues n reds fill in the spectrum real nice I'd imagine.
Are the wee ones glued on?
Neat build.
:cool:
Click to expand...
I feel like it's a decent mix, we'll see what the yield looks like. No actual "blues" though, the monos that look blue are actually UVA. Those 5000k COBs do have a lot of blue goin on though....

The monos are stuck on with Berquist thermal pads; think paper thin double-sided tape. They work great, no issues so far. RapidLED has them as well as the diodes.
 
xX_BHMC_Xx said:
Awesome man, how's the spread? Total consumption?
Click to expand...
Total consumption is just over 200 watts. Spread with the lens is almost the same as without the lens due to the large LES, however the lens is there to protect the cobs, prevent the possibility of being zapped and the light is relatively water proof with it.

Just to clarify for anyone interested , the hexagonal contacts at the bottom of the HLG drivers do a pretty good job on earthing a frame. I measured resistance between frame and ground at multiple locations with a multi-meter and resistance measured 0 ohms which obviously means its pretty low. Under fault conditions the resistance would be a little higher compared to using a 9v multi-meter.
 
I scored on a storage locker filled with these led strips attatched to a aluminum strip. So i took 15 of rhem and screwed them tight against each other making a panel 42"×34" i dont know anything about these so dont know the wattage but i do know i made 2 panels and hung them in a 4x8 tent hooked them up to a
Mean Well RSP-1500-48 AC to DC Power Supply Single Output 48 Volt 32 Amp 1.536kw for
only 3 weeks all switched to 12/12 i was excited to see if they flowered as nice as they vegged and they exceeded my idea of what i thought they would do. I was shocked because i swore by hps lights i never wanted led lights until i saw the dense smelly buds that these led lights produced now its all i will use but inhave tons of them and tons of the power supplies so i need to sell some but first can anyone tell me what exactly i have here. PhotoGrid_1499141720514.jpg
 

Attachments

  • PhotoGrid_1499141720514.jpg
    PhotoGrid_1499141720514.jpg
    3 MB · Views: 40
  • received_1756574294367968.jpeg
    received_1756574294367968.jpeg
    31 KB · Views: 39
  • received_1912400352118694.jpeg
    received_1912400352118694.jpeg
    151.6 KB · Views: 38
  • received_1763799143645483.png
    received_1763799143645483.png
    3 MB · Views: 40
  • 20170515_155658_HDR.jpg
    20170515_155658_HDR.jpg
    2.9 MB · Views: 40
  • 00B0B_8nPbEKFixpE_600x450.jpg
    00B0B_8nPbEKFixpE_600x450.jpg
    23.3 KB · Views: 40
  • Screenshot_2017-05-15-13-48-23.jpg
    Screenshot_2017-05-15-13-48-23.jpg
    350 KB · Views: 41
  • 20170426_155001.jpg
    20170426_155001.jpg
    3.9 MB · Views: 39
Made this this weekend for the veg cab
5630 led light strips 6000k- 6500k 72w per 16.4ft roll. Used 24 ft to make (2) 6"×12" 240 diodes per panel .064 6061 aluminum panels on a 20"×12" frame with a detachable 80w 3000k-3500k smd led 3"x12" smd cob led
12v 180w 15 amp dimmable led power supply
20170702_122933.jpg 20170702_010308-1.jpg 20170703_212126.jpg
 
received_1759520040740060.jpeg
Rolla J said:
Made this this weekend for the veg cab
5630 led light strips 6000k- 6500k 72w per 16.4ft roll. Used 24 ft to make (2) 6"×12" 240 diodes per panel .064 6061 aluminum panels on a 20"×12" frame with a detachable 80w 3000k-3500k smd led 3"x12" smd cob led
12v 180w 15 amp dimmable led power supply
View attachment 3972000 View attachment 3972001 View attachment 3972002
Click to expand...
What is cob man im trying to learn about led lights. And those lights and those power supply that i have are they anything good?
 
Last edited:
Keith41510 said:
View attachment 3972006
What is cob man im trying to learn about led lights. And those lights and those power supply that i have are they anything good
Rolla J said:
COB chip on board. One of the latest led technologies available on the market. Ive never seen anything like what you have in the last pic. But all the other pics the meanwell drivers are top notch. Your weeds are looking mighty fine tho!
Click to expand...
Click to expand...
 
You must log in or register to reply here.
Back
Top