PPFD on 800 watt 301b bar led

dalack

Member
Whats the aproximate max PPFD can be? The light i'm looking at has max levels of 1565 PPFD in the center 2x2 area hung at 6"s off the canopy.
Can leds be placed this close or will they damage the plant?
I'm wondering if I should go for the 640 watt model instead for my 5x5 or just get the 800 and dim it down a bit

Thanks in advance for your input

David
 

Attachments

f series

Well-Known Member
So what should I be looking at besides ppfd in regards to this light?
I'm really not experienced in par ppfd etc etc.
But if I need a light to be ran close, and soft. I would pick whichever light has a higher diode count
 

Airwalker16

Well-Known Member
With dimming functions available, always buy bigger. If it can be dimmed, you're buying both lights for the price of one in reality.
 

Airwalker16

Well-Known Member
And by the way, 800W is actually spot on what you need for a 5'X5'. The 640 would fare in a 4X4 space. If you have no restraints, buy the 800 no doubt.
 

dalack

Member

Its $700 shipped. They say there won't be tariffs on it but we'll see.
I actually have a 9x9 space so was thinking four of these 800 watt lights. I can always dim them if its to much
 

majjy_rane

Active Member
So what should I be looking at besides ppfd in regards to this light?
somebody once told me a good rule of thumb would be ~200 for seedling and young veg, between 500-700 is good for mid veg and mothers and 800 to 1000 for flow and everything over 1100+ is a high risk to burn your girls
 

Rocket Soul

Well-Known Member
somebody once told me a good rule of thumb would be ~200 for seedling and young veg, between 500-700 is good for mid veg and mothers and 800 to 1000 for flow and everything over 1100+ is a high risk to burn your girls
Agreed. Even less for clones than seedlings. Also, it matters very much what temprature you have, how long time you run lights on (18/6 is 50% more than 12/12) and how you get to the intensity, fast or little by little. 1500 is too much for most, only seen it work fine once and still not sure how the plants didnt fry
 

Airwalker16

Well-Known Member
I think i remember someone saying on here that these nalites didn't use Samsung strips.... I'd look into it a bit mote before you pull the trigger
 

Airwalker16

Well-Known Member
 
Top