Purple stem issue

Doug Dawson

Doug Dawson

Well-Known Member
Hey, what is your feed schedule? How many ML per gallon are you putting in of each product? What is PH room temp, RH and PPM?
 
Doug Dawson

Doug Dawson

Well-Known Member
Ok I looked through the thread and found water temp 67-68 co2 1200 , hum around 55% temp 74-76 . What about your PH, PPM, ML/gallon, RO or Tap water, if tap water what is starting PPM before nutes? Is that light 645 watts? How far is it from plants? Is it dimmed?
 
myke

myke

Well-Known Member
If the red stems are caused by the LED light then it will only be the area or sides that face the light. I’ve had plants that are redder on one side then the other.
Its the plants natural reactions to the light. Built in sunscreen so to speak.
 
xtsho

xtsho

Well-Known Member
If the plants are healthy ignore the color of the stem.

I don't know about the strain you're growing but in many cases purple stems are genetic. I currently have 4 different strains growing right now. All are growing in the same soil in the same environment. 2 have purple stems 2 don't. The 2 with purple stems are both crosses I made and have Pakistani Chitral Kush in their lineage which is a very colorful strain.

Purple stems don't necessarily mean anything is wrong with the plant.
 
kratosxxl

kratosxxl

Well-Known Member
Wastei said:
Do you run a chiller? It's a little hit and miss with mixing organics and hydroponics without a chiller. It's not a matter of if but when you're gonna experience problems. I would drop drop the organics all together and run sterile.

It's almost impossible to get DWC stable through time without a chiller if you add organics.

I've run things sterile for many years. Just the complete plant food (jacks321), potassium silicate and bleach. I add 2-3ppm chlorine to everything added to the reservoir at nutrient change, top off etc.
View attachment 4792770
View attachment 4792771
Soon the bowl is full of Spaghetti's. Cheers!
Click to expand...
I do have a chiller. So how many ml of bleach u use ?
 
kratosxxl

kratosxxl

Well-Known Member
Doug Dawson said:
Hey, what is your feed schedule? How many ML per gallon are you putting in of each product? What is PH room temp, RH and PPM?
Click to expand...
50% of gh feed chart
Ph hovers from 5.7-6.1
Hum is about 50-55
Temp 73 night 76 day
Ppm 850 ish no top off cuz they dont drink much i have 120 gall system
 
kratosxxl

kratosxxl

Well-Known Member
Doug Dawson said:
Ok I looked through the thread and found water temp 67-68 co2 1200 , hum around 55% temp 74-76 . What about your PH, PPM, ML/gallon, RO or Tap water, if tap water what is starting PPM before nutes? Is that light 645 watts? How far is it from plants? Is it dimmed?
Click to expand...
So i use 3 stage filtere pom is 250 before adding nutes. Light is 640 watts about 6 feet above at 50% dimmed. I have apogee par meter and readings are 250-300 par
 
Doug Dawson

Doug Dawson

Well-Known Member
kratosxxl said:
So i use 3 stage filtere pom is 250 before adding nutes. Light is 640 watts about 6 feet above at 50% dimmed. I have apogee par meter and readings are 250-300 par
Click to expand...
Hey Man, I concer with xtsho, I would not worry about those purple stems. Purple stems can be genetic, caused by stress, environment or nute issues. You sound like you have things dialed in pretty well. If these are clones than they were stressed in the beginning so that could be all that's wrong. The new growth seems to be green so I would not worry. Your nutes seem a bit weak. My feed has been around 1100 since a few weeks before flip. I would lower the light down to around 30" at 50% , that's what I ran my HLG 600 at and the plants thrived. I would also think about pushing those nutes up a bit. I do coco drain to waste and according to feed chart should be around 600 to 800 but am closer to 1100 at present. Flipped to 12/12 Dec 1st, last feed lowered my micro and grow nutes but increased my bloom nutes so I could start lowering N. The plants really became pigs under the 600 watt LED. Just keep an eye on new growth and ignore the purple. If it's really an issue the plant will start to show other signs.
 
kratosxxl

kratosxxl

Well-Known Member
Doug Dawson said:
Hey Man, I concer with xtsho, I would not worry about those purple stems. Purple stems can be genetic, caused by stress, environment or nute issues. You sound like you have things dialed in pretty well. If these are clones than they were stressed in the beginning so that could be all that's wrong. The new growth seems to be green so I would not worry. Your nutes seem a bit weak. My feed has been around 1100 since a few weeks before flip. I would lower the light down to around 30" at 50% , that's what I ran my HLG 600 at and the plants thrived. I would also think about pushing those nutes up a bit. I do coco drain to waste and according to feed chart should be around 600 to 800 but am closer to 1100 at present. Flipped to 12/12 Dec 1st, last feed lowered my micro and grow nutes but increased my bloom nutes so I could start lowering N. The plants really became pigs under the 600 watt LED. Just keep an eye on new growth and ignore the purple. If it's really an issue the plant will start to show other signs.
Click to expand...
Thank a lot :) i am planning on using house and garden when i flip to flower. I did 50% cuz im fighting algae on a roots so i though to give me lighter nute to not stress them out more and ues they were purple since they were clones. Now the wierd thing is they were 48 inches above at 50 and looked stresed thats why i raised them should i try raising intensity like 10 % maybe ? Instead of lowering ?
 
Doug Dawson

Doug Dawson

Well-Known Member
kratosxxl said:
Thank a lot :) i am planning on using house and garden when i flip to flower. I did 50% cuz im fighting algae on a roots so i though to give me lighter nute to not stress them out more and ues they were purple since they were clones. Now the wierd thing is they were 48 inches above at 50 and looked stresed thats why i raised them should i try raising intensity like 10 % maybe ? Instead of lowering ?
Click to expand...
Sure, those dimmers are a great asset. I ran mine at 30", 300 watts until flip than at 24" and brought up to 100% over the course of a week and the plants reacted very well. They were from seed though so did not have the same stresses. It could also be the stress you saw was lack of nutes to handle the led. I ran my last run under HPS and fed 1/2 GH nutes their whole life, this time with new LED I am at more like 110 to 120 % GH suggested nutes. The LED really does make them want more food and higher temps. I would say up the lights a bit and just watch your new growth for signs of issues, just ignore the purple stems.
 
kratosxxl

kratosxxl

Well-Known Member
Doug Dawson said:
Sure, those dimmers are a great asset. I ran mine at 30", 300 watts until flip than at 24" and brought up to 100% over the course of a week and the plants reacted very well. They were from seed though so did not have the same stresses. It could also be the stress you saw was lack of nutes to handle the led. I ran my last run under HPS and fed 1/2 GH nutes their whole life, this time with new LED I am at more like 110 to 120 % GH suggested nutes. The LED really does make them want more food and higher temps. I would say up the lights a bit and just watch your new growth for signs of issues, just ignore the purple stems.
Click to expand...
So when u flip to 12/12 you lower them to 24 and raised to 100 % over a course of a week ? is it like 10 % every other day or 5 % everyday ? Im still learning how to manipulate lights
 
kratosxxl

kratosxxl

Well-Known Member
the reason im asking is its kind of dfclt to lower or raise due to my room setup ,so what i usually do is hange them 6 feet and will flip to flower when they are at 2 ft , so if everything is fine the stretch should stop at 4 ft tree height and that will be 18 inches below light
 
Doug Dawson

Doug Dawson

Well-Known Member
kratosxxl said:
So when u flip to 12/12 you lower them to 24 and raised to 100 % over a course of a week ? is it like 10 % every other day or 5 % everyday ? Im still learning how to manipulate lights
Click to expand...
Yes, I just started turning up the dimmer about 40 watts per day, it's plugged into a kill a watt type device so I can see exact power draw. I also have a UV bar attached to the light which adds about 30 more watts so at present I am running 630 watts. Your process sounds like it will work well.
 
kratosxxl

kratosxxl

Well-Known Member
Doug Dawson said:
Yes, I just started turning up the dimmer about 40 watts per day, it's plugged into a kill a watt type device so I can see exact power draw. I also have a UV bar attached to the light which adds about 30 more watts so at present I am running 630 watts. Your process sounds like it will work well.
Click to expand...
If its ok with u can u share what uv u bought and schedule ? I saw online something about running uv for 2 hr in flower per day or something similar
 
Doug Dawson

Doug Dawson

Well-Known Member
kratosxxl said:
If its ok with u can u share what uv u bought and schedule ? I saw online something about running uv for 2 hr in flower per day or something similar
Click to expand...
Depends on the UV and it's spectrum. I am running an HLG 600 with and HLG UV bar attachment. It's UVA and runs 12/12 the same as main light through whole flower cycle. If going with something like a Solacure, which is UVB, you would want to limit exposure to a couple hours a day. Reason being that UVB is more damaging. Only 5% of UVB makes it through the atmosphere and will damage plant cells. Both UVA and UVB will cause the plant to produce more trichomes to protect itself. Than you can get into very low band UVB, this will actually shock the plant which can increase potency of the THC but is also the most harmful to work with. Too much and you damage the plants cells. The UBA seems to we doing well, here is a pic 4 weeks after light change, it seems to be frosting up nice for being so young.
Screenshot_20210102-192608_Gallery.jpgScreenshot_20210102-192628_Gallery.jpg
 
kratosxxl

kratosxxl

Well-Known Member
Doug Dawson said:
Depends on the UV and it's spectrum. I am running an HLG 600 with and HLG UV bar attachment. It's UVA and runs 12/12 the same as main light through whole flower cycle. If going with something like a Solacure, which is UVB, you would want to limit exposure to a couple hours a day. Reason being that UVB is more damaging. Only 5% of UVB makes it through the atmosphere and will damage plant cells. Both UVA and UVB will cause the plant to produce more trichomes to protect itself. Than you can get into very low band UVB, this will actually shock the plant which can increase potency of the THC but is also the most harmful to work with. Too much and you damage the plants cells. The UBA seems to we doing well, here is a pic 4 weeks after light change, it seems to be frosting up nice for being so young.
View attachment 4792997View attachment 4792999
Click to expand...
So uva is safer and can be run 12 hrs ?
 
You must log in or register to reply here.
Top