Question about Meanwell Dimming
- Thread starter Niall01
- Start date
Boatguy
Well-Known Member
No. Its output is fixed, non adjustable
Pedro Mello
Well-Known Member
Hi guys!
I have a Meanwell A/B Type Driver. The fact it is an A-type means that I'm able to configure it using a Philips screwdriver, right?
My question is about the fact it is also a B-type.
To use it funcionality I need a 100K potentiometer, don't I? Is it possible to use the driver without this potentiometer? In this case would it work? The voltage would be the maximum possible?
I have a Meanwell A/B Type Driver. The fact it is an A-type means that I'm able to configure it using a Philips screwdriver, right?
My question is about the fact it is also a B-type.
To use it funcionality I need a 100K potentiometer, don't I? Is it possible to use the driver without this potentiometer? In this case would it work? The voltage would be the maximum possible?
Rahz
Well-Known Member
Yes, and yes, wire leads taped off = wide open. If you did want a specific dimming level on the cheap a resistor between them would give you a fixed dimming level; 60K ohm resistor = dimmed to 60%.
Similar threads
