Quick question on which HLG600 to use.

Airwalker16 said:

I don't understand how they can be the same thing. One has a path going from 1-4 and the other goes to all at once. Like how is it the same if one has all the electricity going through one wire and the other has a completely secondary wire being used to continue on the circuit?

@CobKits

Click to expand...

Because it's all going to a positive connection. Or a negative connection.
If you jump 1 cob positive to the next cob positive, all it's doing is taking the drivers positive connection and continuing it down the line. Same with the negative connection

It would be the exact same if you didnt even hook the drivers connection to the first cob, and instead hooked it to a wago, then have a wire coming out of the cob to the wago, then another wire from the next cob, going to a wago, and you jump those 2 wagos. Like in your first drawing.

i dont like putting multiple wires in holders like that. too much room for bad connections also too much current for the first 18ga leads.

coming right off the 14 ga driver leads to a 5-slot wago and running individual leads to the cobs is much preferred. jacketed 2 conductor 18 solid works great for that

Airwalker16 said:

Explain this a bit more in detail?

Click to expand...

that was the detail