Rolling a Blunt
- Thread starter ck4627
- Start date
Hehe they work wonders, there my fav'sss.
They are only to tight if you roll em to tight
Its all in the fingers
baseballman
Active Member
check vids at youtube. Jus member roll dont fold
biofeedbackfred
Active Member
check it out:
dont think too much about it, just roll it up..really simple..more you think about the more u are fucked
dont think too much about it, just roll it up..really simple..more you think about the more u are fucked
plumsauce
Active Member
i do it 2 ways, use a blunt wrap and roll like a doob , or i use a cigar
there are 2 ways to do the cigar, you can use a razor and cut down the side of the whole thing, than carefully pull all the tobaco out, and restuff with slightlly less mary-j, leave just enough room to over lap the 2 edges lick the whole cigar vigorously to make sure you dont rip or crackthe tobaco, then seal by licking the inside edge like a paper and pressing it all together. woks a wonder
or my prefured method, i perfected with 2 boxes of cubans my friend brought me back from cuba one box was cigars that were the same size as a cigarette , the other box was larger cigars that i didnt use oftin because it used a little to much of my stash, but if you aim to impress go with the big one.
for the small cigars i used a dry wall screw to "drill" out the first inch of tobaco then i used a long phillips eyeglass screwdriver to drill and scrape the tobaco out of the cigar, i would leave 1/4 to 1/2 an inch of tobaco in the botom to act like a small filter, and to hold the green in whell restuffing, then i would use the small screw driver to stuff all the greeen into the cigar tube, this way you can make it as tight or loose as you want, there is no geuss work on how much you put in,
the second method is a little time consuming, but oooh boy there ins nothing beter than kickin back with the fellas and sparking a cuban blunt, the taist from it (or any cigar emptied out) is 10 times beter than any blunt wrap iv ever used, and iv used a few in my time.. ... also it looks like theres a lot more threads VVVVV below , you may find some pics there
there are 2 ways to do the cigar, you can use a razor and cut down the side of the whole thing, than carefully pull all the tobaco out, and restuff with slightlly less mary-j, leave just enough room to over lap the 2 edges lick the whole cigar vigorously to make sure you dont rip or crackthe tobaco, then seal by licking the inside edge like a paper and pressing it all together. woks a wonder
or my prefured method, i perfected with 2 boxes of cubans my friend brought me back from cuba one box was cigars that were the same size as a cigarette , the other box was larger cigars that i didnt use oftin because it used a little to much of my stash, but if you aim to impress go with the big one.
for the small cigars i used a dry wall screw to "drill" out the first inch of tobaco then i used a long phillips eyeglass screwdriver to drill and scrape the tobaco out of the cigar, i would leave 1/4 to 1/2 an inch of tobaco in the botom to act like a small filter, and to hold the green in whell restuffing, then i would use the small screw driver to stuff all the greeen into the cigar tube, this way you can make it as tight or loose as you want, there is no geuss work on how much you put in,
the second method is a little time consuming, but oooh boy there ins nothing beter than kickin back with the fellas and sparking a cuban blunt, the taist from it (or any cigar emptied out) is 10 times beter than any blunt wrap iv ever used, and iv used a few in my time.. ... also it looks like theres a lot more threads VVVVV below , you may find some pics there
Sk8Embrace
Active Member
Sweetheart707
Active Member
its rlly not hard..just pinch and roll..make sur u dont have too much weed tho..it messes it up.. but as long as u have a rollin machin dont even tripp.
juststartin
Well-Known Member
i find blunts easy to roll, they almost want to roll on there own! Practice makes perfect bro, if u cant roll at all that well do a few normal J's before a blunt.
K1Ng5p4d3
Junior Creatologist
N dude, I use a bannana Phillie nowadays, but you aint gonna be able to roll with a blunt that tiny yet. Go out and buy yourself a Garcia Vega or an Optimo greenleaf blunt, N go home.
Once your at the pad, break up your bud. i would use about a gram, but if you use a little less, your forgiven. So break up the chronic, but not as finely as you would normally with a joint. leave tiny little pieces of the bud not broken down into dust or if your using scissors, make sure you cut it down pretty well, but dont get over obsessive with it.
Once your bud is broken up, set it to the side, and bust out your Vega. Your gonna wanna learn how to crack a blunt, but thatll come to you later when you get used to smokin n rolling blunts for yourself. In your case, use a razor blade, it works just fine. Slice down the middle of the blunt length wise, until the blunt is open, and you can dump out the guts of the blunt. All the tobacco goes in the trash, you keep the wrapper - this is now your rolling paper.
So since the blunt is more than likley dry as hell, your gonna wanna slobber all over the fucker. just lick up the blunt until all of the edges are flat, and all the layers of the wrapping just look like one layer. Cup the blunt wrapper in your hand, and dump your bud inside.
Spread out the bud evenly throughout the blunt, making sure to take out any remnants of stems, because they pop through a blunt really easily.
after you do this, and the weed is evenly distributed throughout, take the bottom half of your wrap, and fold it over, until the lip of the bottom half is wrapped over the bud, and leave it about 1/2 inch to 1 inch below the lip of the top half of the blunt wrap.
from this point is where your gonna have to practice. it took me like 5 tries when i first started to roll blunts before i got it perfect. its easy to roll on so its smokeable, but eventually your gonna shoot for style too, lol.
So take the half wrapped blunt into your hands, and while holding it up, take your index fingers, and use them to simultaneously tuck the bottom half of the wrapper into the fold, making sure that all of your bud is secure and covered by the bottom half that you folded up and over the bud. there should still be a flap at the top, and should be larger than a 1/2 inch now since your tucking the bottom part in, like you would roll a carpet basically, only your not rolling it just yet, your just tucking.
So, once youve tucked the bottom half in, run your index fingers along the crease on each side simultaneously, making sure that everything is nice n tight. then, take your index fingers out of the inside of the blunt, and use your thumbs to roll the blunt up about another half inch. this is to get the blunt ready for the last step. you wanna have a nice lip left- this will be the "glue" end of the blunt, like a joint has glue-your blunt will too, only its gonna be saliva instead of glue, lol.
Holding the blunt in your fingertips, take one end of the lip left over, and put it in your mouth. get it fairly wet, and while its still in your mouth, pull the flap over the rest of the rolled up end of the blunt, and drag it over the surface using your lips, ending when there is no more flap at the end. That part of the blunt should be sealed and rolled up. if there are loose leaves at the end still, just repeat the licking process until your saliva makes the damn thing stay put, lol.
Now, heres the part where you can cheat if your a beginner.
from the part of the blunt that you just rolled(which should be only the very end. you should look at the blunt and see 75% of it is still unrolled), you can go to the very beginning of where the "glue" flap bonds to the blunt, and tear the flap away from the bonded part , to where the part of the flap you just rolled up is seperate from the rest of the unrolled flap. from there, you just keep repeating the process. But make sure when you tear the flap away from the rolled bit, your only tearing the wrap about 1/2 inch in, because you dont wanna fuck shit up too much, lol. n just keep repeating the rolling process until you get to the other end man.
one of the good things about using that method for beginners is, if you rolled it too tight or not tight enough, you can just open the blunt back up, bit by bit, and tighten it back up, rather than having to open up the whole blunt n startin over.
Sooner or later youll become a pro at this man. N once you do, youll be able to roll a blunt that looks like a cigarillo. I mean itll look so good all youll have to do is put a tip on it n people will think your smokin a black n mild - til they smell it
i mean, i guess its different for everyone, but if i can roll some perfect blunts man, any fuckin body can. trust me.
I hope i made SOME typa sense to you dude, and i hope the instructions were easy to follow - cuz its fuckin hard to describe to someone how to roll a blunt man. ive actually never tried to explain it before, so i hope you have success.
Happy Halloween man, n good luck in your rollin endeavours.
-K1
Once your at the pad, break up your bud. i would use about a gram, but if you use a little less, your forgiven. So break up the chronic, but not as finely as you would normally with a joint. leave tiny little pieces of the bud not broken down into dust or if your using scissors, make sure you cut it down pretty well, but dont get over obsessive with it.
Once your bud is broken up, set it to the side, and bust out your Vega. Your gonna wanna learn how to crack a blunt, but thatll come to you later when you get used to smokin n rolling blunts for yourself. In your case, use a razor blade, it works just fine. Slice down the middle of the blunt length wise, until the blunt is open, and you can dump out the guts of the blunt. All the tobacco goes in the trash, you keep the wrapper - this is now your rolling paper.
So since the blunt is more than likley dry as hell, your gonna wanna slobber all over the fucker. just lick up the blunt until all of the edges are flat, and all the layers of the wrapping just look like one layer. Cup the blunt wrapper in your hand, and dump your bud inside.
Spread out the bud evenly throughout the blunt, making sure to take out any remnants of stems, because they pop through a blunt really easily.
after you do this, and the weed is evenly distributed throughout, take the bottom half of your wrap, and fold it over, until the lip of the bottom half is wrapped over the bud, and leave it about 1/2 inch to 1 inch below the lip of the top half of the blunt wrap.
from this point is where your gonna have to practice. it took me like 5 tries when i first started to roll blunts before i got it perfect. its easy to roll on so its smokeable, but eventually your gonna shoot for style too, lol.
So take the half wrapped blunt into your hands, and while holding it up, take your index fingers, and use them to simultaneously tuck the bottom half of the wrapper into the fold, making sure that all of your bud is secure and covered by the bottom half that you folded up and over the bud. there should still be a flap at the top, and should be larger than a 1/2 inch now since your tucking the bottom part in, like you would roll a carpet basically, only your not rolling it just yet, your just tucking.
So, once youve tucked the bottom half in, run your index fingers along the crease on each side simultaneously, making sure that everything is nice n tight. then, take your index fingers out of the inside of the blunt, and use your thumbs to roll the blunt up about another half inch. this is to get the blunt ready for the last step. you wanna have a nice lip left- this will be the "glue" end of the blunt, like a joint has glue-your blunt will too, only its gonna be saliva instead of glue, lol.
Holding the blunt in your fingertips, take one end of the lip left over, and put it in your mouth. get it fairly wet, and while its still in your mouth, pull the flap over the rest of the rolled up end of the blunt, and drag it over the surface using your lips, ending when there is no more flap at the end. That part of the blunt should be sealed and rolled up. if there are loose leaves at the end still, just repeat the licking process until your saliva makes the damn thing stay put, lol.
Now, heres the part where you can cheat if your a beginner.
from the part of the blunt that you just rolled(which should be only the very end. you should look at the blunt and see 75% of it is still unrolled), you can go to the very beginning of where the "glue" flap bonds to the blunt, and tear the flap away from the bonded part , to where the part of the flap you just rolled up is seperate from the rest of the unrolled flap. from there, you just keep repeating the process. But make sure when you tear the flap away from the rolled bit, your only tearing the wrap about 1/2 inch in, because you dont wanna fuck shit up too much, lol. n just keep repeating the rolling process until you get to the other end man.
one of the good things about using that method for beginners is, if you rolled it too tight or not tight enough, you can just open the blunt back up, bit by bit, and tighten it back up, rather than having to open up the whole blunt n startin over.
Sooner or later youll become a pro at this man. N once you do, youll be able to roll a blunt that looks like a cigarillo. I mean itll look so good all youll have to do is put a tip on it n people will think your smokin a black n mild - til they smell it
i mean, i guess its different for everyone, but if i can roll some perfect blunts man, any fuckin body can. trust me.I hope i made SOME typa sense to you dude, and i hope the instructions were easy to follow - cuz its fuckin hard to describe to someone how to roll a blunt man. ive actually never tried to explain it before, so i hope you have success.
Happy Halloween man, n good luck in your rollin endeavours.
-K1
K1Ng5p4d3
Junior Creatologist
what were the brand of the cubans your buddy brought u??? i smoke cigars occasionally man
Earlytoker
Well-Known Member
Its like a video game really, a matter of skill like anything else.
Heres a video although its up to you, i can give you a video of someone
growin some badass weed but even if you were to follow it step by step
you wouldnt produce the same thing.
here ya go How To Roll A Blunt - Video
Heres a video although its up to you, i can give you a video of someone
growin some badass weed but even if you were to follow it step by step
you wouldnt produce the same thing.
here ya go How To Roll A Blunt - Video
rockthedashboard
Active Member
you gotta be using the dutchmaster's man..the only way i roll
Tryingtomastrkush
Well-Known Member
rolling a blunt is a helluva lot easier than a joint man....blunts roll themselves pretty much get like a swisher and split it...if you are new to it a razor blade is your best friend after that you can split it with your fingers....
put your weed in there and start at the end of the mouth piece and make sure its a little smaller than the rest with a nice tight circle...for the rest of the blunt just go little bit by little bit just pressing slightly and rolling the side closest to you over the bud....like both sides of the blunt cuz it takes a lot of moisture to get it to stick and letting it dry after it sticks makes it hold a lot better after all that you got a nice smooth blunt....
its really not hard just give it a shot....i've been smokin for years and can roll a perfect blunt but joints i have yet to master(probably for a lack of really trying...i prefer blunts)
put your weed in there and start at the end of the mouth piece and make sure its a little smaller than the rest with a nice tight circle...for the rest of the blunt just go little bit by little bit just pressing slightly and rolling the side closest to you over the bud....like both sides of the blunt cuz it takes a lot of moisture to get it to stick and letting it dry after it sticks makes it hold a lot better after all that you got a nice smooth blunt....
its really not hard just give it a shot....i've been smokin for years and can roll a perfect blunt but joints i have yet to master(probably for a lack of really trying...i prefer blunts)