Shakes/Tremors From Dabs

I'm a firm believer when you look at the medical community as a whole,doctors, big pharma ect..there are some of thebiggest liars and profiteers on the plant...so what makes you think when broken down to just the medical marijuana community this same deciet won't exist, possibly on a larger level?

CBDFarm said:

Yes I do, but I am not going to respond to you anymore hence why I didn't quote you in my first post, as you are obviously a wax snob, and I don't have time for people like that. So have a good one buddy

Click to expand...

So being health conscience and wanting completely clean meds free of chemicals and pesticides and molds makes me a wax snob.

I'm willing to put in the work to make the best quality product I can instead of half assing it like most peiple on here
makes me a wax snob ok.

Not wanting lung cancer from smoking dirty meds makes me a wax snob ok.

So.i guess I'm a wax snob then. I wouldn't want to be anything else then.


I guess you need to step up your game.

hyroot said:

So being health conscience and wanting completely clean meds free of chemicals and pesticides and molds makes me a wax snob.

I'm willing to put in the work to make the best quality product I can instead of half assing it like most peiple on here
makes me a wax snob ok.

Not wanting lung cancer from smoking dirty meds makes me a wax snob ok.


I guess you need to step up your game.

Click to expand...

What about the cat hair ?

so why does no one think about the fact all the nasty shit in bho, if you have a clean source of n-butane/iso-butane/n-propane.Comes from the trim/flower itself. the growers need to stop using that crap. if its on the trim you are going to get it in your extract no matter what method you use rosin, hydrocarbon, drysift, bubble,Co2,lipid.. does not matter if the trim is bad its going to make a tainted product.

hyroot said:

So being health conscience and wanting completely clean meds free of chemicals and pesticides and molds makes me a wax snob.

I'm willing to put in the work to make the best quality product I can instead of half assing it like most peiple on here
makes me a wax snob ok.

Not wanting lung cancer from smoking dirty meds makes me a wax snob ok.

So.i guess I'm a wax snob then. I wouldn't want to be anything else then.


I guess you need to step up your game.

Click to expand...

Im fine selling to the clinics that buy from me already LMFAO. See ya.

I agree with @Fadedawg you dont need an expensive set up if you know what your doing

Fadedawg said:

A simple vacuum chamber, with proper heat and vacuum will do the same things a vacuum oven can.

Click to expand...

Yup

Just cause your snobby doesn't make you right. I agree with @Fadedawg . You dont need a $10k set up to make clean bho. You just need to know what your doing. A vac oven just makes things easier on that babysitting part

hyroot said:

About a 100 ppm's . You won't purge for shit with one of those chambers.. Your finished bho product should always be at 0 ppm's. That won't happen without a vac oven. You need to purge for 3 to 5 days straight.

Click to expand...

Might you further define "One of those chambers"??? A vacuum oven is a vacuum chamber with controlled heating and vacuum.

A good point that brothers and sisters without the knowledge and equipment would be better served to get their concentrates from a reputable tested source that does, (until they do) but I can get None Detected results with the first vacuum bell and hot plate that I started with, and a 3rd party lab test cutoff of .234 ppm. The same results as with the Cascade TEKs that we now run and have more fun with.

Where a vacuum oven shines, is where you are running larger volumes, and can be had with as much instrumentation as you can afford, to make your operators lifes easier.

R&RHashman said:

so why does no one think about the fact all the nasty shit in bho, if you have a clean source of n-butane/iso-butane/n-propane.Comes from the trim/flower itself. the growers need to stop using that crap. if its on the trim you are going to get it in your extract no matter what method you use rosin, hydrocarbon, drysift, bubble,Co2,lipid.. does not matter if the trim is bad its going to make a tainted product.

Click to expand...

Very true. If one uses chemicals for the plants than unfortunately any extraction will be "dirty". Can have the cleanest butane but you extract trim that was sprayed with chemicals than its just done.

My thing is, everyone talks about dirty butane and mystery oil and such,rightfully so. But they don't really talk about ethanol washes which is what extraction i do most. There is no "mystery oil"n gunk. Hell my friend makes it from scratch. We use organic corn and such. Wish more would talk about ethanol washes more. Quiet a bit safer too than butane.

what I am saying War is no extraction method will not pull that crap off the plant still does not matter what you use garbage in garbage out. most likely is the problem. and have you ever seen an alcohol pan go up? all forms of extraction that use flammable solvents are dangerous claiming it is quiet a bit safer is not a true statement

R&RHashman said:

what I am saying War is no extraction method will not pull that crap off the plant still does not matter what you use garbage in garbage out. most likely is the problem. and have you ever seen an alcohol pan go up? all forms of extraction that use flammable solvents are dangerous claiming it is quiet a bit safer is not a true statement

Click to expand...

I know what you meant,that's why i agreed with it lol. I just think I worded it a little confusing lol.

As far as the alcohol pan,yes i have seen it and surprisingly the pan didn't crack or break likei thought it would. It didn't last very long either but i really don't do big runs. Everything i do is personal use so I'll run a oz or so of material each run.And just in case, anyone wondering, I set the pan on fire ON PURPOSE. I wanted to see what would happen. I did it in a empty parking lot at my work. Private parking.

You are correct though, all forms of extraction are dangerous and should be done properly. By no means am i saying this is fool proof and safe as water. But compared to butane extraction,it's safer I feel. And if you fuck up the extraction, just drink it lol jk. Hell you can burn yourself with rosin extraction so that has some danger too.

Driving a car is safer than riding a motorcycle, both are dangerous but one is less dangerous for sure.

Lol when i was a youngin after soaking all my pieces in iso id put in a funnel shapped dish or pan and light it on fire then scrape res